Comments on PC are in a larger font seen on MAC

Similar Questions

• Apple notes - need larger fonts

  Hi all

  I need a permanent larger font in bot Notes apple for iPhone and Mac?

  -Mac, I can underline text and CMD + but this is only temporary...

  -on the iPhone, I can display and brightness - but it's for the entire phone - so he'll do a text too large for other applications

  Q: How can I set the size of the text on Mac and iPhone to APPLE NOTES APP to the size I want?

  There is no option, but you can ask what apple, he added in a later version.

  To send comments directly to Apple, use this link: http://www.apple.com/feedback/

• text with a larger font for printing on paper of reflow

  I visit the http://paragraf1.cappelendamm.no/c165513/sammendrag/vis.html?tid=205854 page and try to print it.

  The result is "scaling to fit page', and has a very small font.
  I can print in landscape mode, which solves the problem in this particular case, but I would like to be able to print in portrait mode.

  If I feel 100% nationally, much of the text disappears to the right of the edge of paper.

  I wish that it is a control to rearrange the text using large fonts without increasing the total width of the layout.

  Is there a way?

  This site cleverly created which removes the first column of the table of three columns when you print a style sheet, but they neglected the fact that the width of the table is fixed in pixels for width too wide for portrait printing.

  In this area and many other cases, you can manually 'hack' of the page to print better, but unfortunately, there is no single solution to this problem.

  For example, in this case, you can remove the width setting of the table of three columns with a snippet of JavaScript code.

  (1) select the following script, and then copy it to the Clipboard:

  
  var tables=document.querySelectorAll("table"); for (var num=0; num<tables.length; num++){tables[num].removeAttribute("width");}
  

  (2) open the web console by pressing Ctrl + Shift + k (it's also in the Web Developer menu).

  (3) next to the circumflex accent (>) paste the line script and press ENTER to run it

  (4), try to preview before printing to confirm that it worked. You can close the web console using the small "x" in the upper right corner of the pane, or by pressing Ctrl + Shift + k new.

  I've always wanted an add-on that could attach to the top of any page to print, but because of the wide variety of page layouts, it is difficult to automate. For now, you can try one that allows you to add the page to the preview screen: Print Edit - Add - ons for Firefox. It takes some practice to select the correct element, but if you prefer really clean and usable prints, it might be worth investing a bit of time to learn it. Regarding the ' "smart printing, maybe one day!

• The screen of my email got really large fonts and I cannot understand how it return to normal. Must be a Firefox thing because when I open it in Explorer it is a normal size.

  While typing on the screen of my email (Comcast), he just started growing and is now quite large fonts. I can't understand how to go back to normal size.

  Hello

  Please try pressing Ctrl + 0 (zero). This resets the zoom. You can also see (Alt + V) > Zoom > reset.

  Using Zoom

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Information page (Alt + T) tools > Page Info, right-click > view Page information

  Keyboard shortcuts

  View without Plugins

  Files & Firefox profile folder

  Firefox commands

  Basic troubleshooting

  After the upgrade

  Safe mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Troubleshooting Plugins

  Test Plugins

• Too large fonts in Windows

  original title: help

  i cant get onto my drive of theory because of large fonts?

  Hi christinamurray,

  Follow the troubleshooting steps in this document to change the font size on your computer.

  Let us know if that helps.

• How can I get larger fonts and change the background color in Outlook Express, a light blue to improve my vision

  original title: vision problems.  How can I get bigger fonts in incoming messages on Outlook Express?  How can I change the background color in Outlook Express for a light blue to improve my vision of the messages.e

  I have problems with my vision.  How the larger font for messages in Outlook Express so that I can see them?  Also how can I make the background is easier on my eyes.  As a light blue or something.  Thank you.

  You can change the font size of incoming emails by going to the Tools menu in Outlook Express and selecting Options.  Open the read tab, and then click the fonts option.  In the fonts window, click on font size and make your selection.  I always click OK, then apply and OK to be sure change stick.  You may close OE and then reopen it for the change to take effect.

  I don't know of any way to change the background color of the e-mails received.  I'm sure someone will have an answer for this procedure.

  Rosie
  Dell OptiPlex GX260, 2.40 GHZ, Pentium 4, 80G HD, Windows XP Pro (SP3), IE8, Avira, Spybot S & D, SpywareBlaster 4.2, 4.0 OnlineArmor

• How can I expand the sidebar of Windows so that for example the photos are a bit larger?

  How can I expand the sidebar of Windows so that for example the photos are a bit larger?

  You can use your mouse to drag the sidebar of windows...

  Windows Sidebar: Frequently asked questions

• my fonts Office has suddenly changed to a larger font, how do I get this back to the original size?

  my fonts Office has suddenly changed to a larger font, how do I get this back to the original size? I tried to change it by right-clicking the mouse and personlized want and it did not work. I'm runnin Windows vista. Thank you, Martha

  Hi dude 11-2,.

  Follow the steps in this document to change the screen resolution.

  Let us know if that helps.

• M401dne does not print large font

  I made a page in Word 2010 with a 115-point font. My M401dne prints as a blank page.  The page prints fine at my local DeskJet 6940. The M401 is a network printer, and I use the version of HP Universal PCL6 61.170.1.18326 printer driver. I have attached the page if someone else with my setup to try to print.

  Is this related to a known issue?

  Thanks for any idea.

  Jeffrey Pike

  Groton public library

  I don't have your Installer ((Universal) printer driver, so I can't do a like-for-like test or printer model.)

  What I did is:

  • Install it 'HP LaserJet 400 M401 PCL6 driver class' built into Windows 8.1 Professional 64-bit edition.
  • This used to "print" your document (using Word 2013) in a capture .prn file.
  • Envoy conternts of the file captured at my local LaserJet 1320n printer; the text of the large font size prints OK.
  • Envoy conternts of the file captured at my local printer LaserJet Pro 400 MFP M475dn ; the text of the large font size prints OK.

  What you could do is to take the same file (attached, with an extension extra .txt added to the name so that it can be attached here) and send the content to your printer port and check the result.

  If it prints OK, then the problem is likely to be something to do with your driver printer and/or the application.

  If it does not print OK, then the printer, or the printer firmware, is at fault (or arguably deliberately not large font sizes).

  Welcoming send the contents of the file on a network printer from a Windows command prompt session, use:

  LPR s address of the printer P - all largefont_M401_PCL6ClassDriver.prn.txt

  to send the contents of largefont_M401_PCL6ClassDriver.prn.txt to the printer with TCP - IP address address of the printer.

• Impossible to focus a large font size

  Hello

  I can't focus a large font size of a LabelField as a VerticalFieldManager.  If I don't get the font size, it will be centered.  However, more police, more aligned to the left on the screen size, I will become.  Does anyone know how can I fix?  Here is my code:

  Font pointsFont = Font.getDefault().derive(Font.BOLD, 72, Ui.UNITS_pt);
  
          VerticalFieldManager vfm = new VerticalFieldManager(
                  VerticalFieldManager.FIELD_HCENTER);
  
          lblPoints = new LabelField("100", LabelField.FIELD_HCENTER);
          lblPoints.setFont(pointsFont);
  
          LabelField lblPointsLabel = new LabelField("Points",
                  LabelField.FIELD_HCENTER);
  
          vfm.add(lblPoints);
          vfm.add(lblPointsLabel);
  
                  add(vfm);
  

  Thank you!

  try to use the style DrawStyle.HCENTER,

  lblPoints = new LabelField("100", LabelField.FIELD_HCENTER | DrawStyle.HCENTER);
  

• Find the old XP for large fonts setting, Extra large fonts in Win7

  Under Win XP, if you right click the desktop, you can go into the settings display or appearance (I forget which) and choose to change the font size in the world, the Normal font, large fonts or Extra Large.  You can also change the ppp settings.

  In Win 7, it seems only global allows you to change the sizes of police or through DPI settings, and for me, is not enough.  I had found the right combination of a DPI higher associated with "large fonts", which worked very well in most programs.

  My question: nor not Win7 were the old normal, large and extra-large, choice of fonts hidden somewhere like the one shown below (and again, I speak NOT the DPI settings for large fonts)?

  http://www.ConsumerWorld.org/GIFs/LargeFonts.jpg

  (Also, I don't know about the font in IE settings, etc., but it's too not that I am referring is.)

  Thank you
  Edgar

  Hello dworskye,

  Unfortunately this option is no longer available.
  You can change the resolution, change the DPI, and depending on the used theme change the sizes of individual fonts. Need you to do this right click the desktop, click personalization, Color of Windows, click on Advanced appearance settings
  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After export to HTML the typekit fonts are replaced with system fonts.

  I used typekit fonts in my Web site. In the preview mode and tests in the browser everything works very well, but after export to HTML the typekit are replaced with system fonts.

  What I am doing wrong?

  Hello

  Please see question TypeKit

  Abhishek

• The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. The text even unincorporated font that is formatted as text (not scanned) become stupid

  The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. Even fonts not embedded text that is formatted as text (not digital) are themselves converted to fonts embedded by adobe distiller.

  Fix. Expected behavior.

  Output of the OCR is not incorporated. With Acrobat Pro, a preflight check is available to embed the fonts.

  On the use of Distiller - using a work option distill configured appropriately that the PDF created from the authoring application (FrameMaker, InDesign, MS Word, etc.) will have embedded fonts.

  Be well...

• File to change PDF to print with a larger font

  I understand that with Adobe Acrobat 9 or X, we could be able to print a PDF with a larger font.  Is the only way because I don't have any other software - only the free player.  To retirement and visually impaired, I really want to pay the full purchase price.  I got the 4K eye surgeon...

  You talk about a type change function that is not part of Acrobat. Sorry, but extend the font size which would require also a reflow of the document is not appropriate in Acrobat action. If you can convert the PDF to WORD or Open OFFICE (may be able to open a PDF file in one of them - maybe but doubt actually), you could do the expansion in WORD or Open OFFICE (or free AGENCY). Another option could be to try to copy and paste from the PDF file to a word processor. Unfortunately, you often end up with a large number of symbols of paragraph at the end of each line and may have to do a reformat. Good luck.

• How to install a web free font hosted on Mac OS 10.8.5?

  Hello

  I'm working on Muse with a PC and a Mac.

  I created a website with Muse and I use a downloaded free times on the web: the police Roboto.

  I managed to install the font on my pc to have police hosted auto (woff, eot and svg files).

  I try to install this font on my mac using OS 10.8.5. When I run Muse and try to install the font using the way of drag / move, even if the woff, eot and svg files are on my mac, muse can't find the woff file. But the police are supposed to be installed on my mac using the .ttf file. I can find the police on my font library.

  I don't know how to properly install this particular font so that muse correctly found 3 specific files needed (and especially the .woff one). If anyone has some advice, it would be very useful.

  Thank you very much.

  Of course that could happen, I also downloaded these fonts and gave them a try. I was able to install all the technical elements on my system and successfully add the whole folder as a self-hosted in Muse. So no problem here and not a technical problem on the police side.

  Maybe a regular TTF has a conflict with another font on your system? It is not a fonts is "illegal" or "corrupt", but sometimes some fonts just don't feel comfortable sitting next to each other, due to a missing dialing astray, either an internal ID miscalculated. It is always difficult to diagnose a problem and determine a solution. Trial and error, by (de), installation of the fonts, is sometimes useful...

  If everything fails, try downloading and using this free fonts to font squirrel Roboto instead. As with the song, there are several distributions and versions of coverage.