Comments print - nach Anleitung / works leider nicht!

Similar Questions

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• Upgrading to OS El Capitan, now my printer is not working

  As above, update OS El Capitan and now my MP500 printer do not work.   I get an error message about the filter (?).  I tried the scanner, it scans, but there is no way to record what I scanned.  I suspect he need a driver more recent or different, but I can't remember how to on this subject.

  Printer and scanner software available for download for your Mac - Apple Support

• My printer does not work on Firefox?

  My printer does not work on Firefox? It works on explore?

  "My printer does not work on Firefox" gives no details on the problem. It is a good starting point:

  • http://KB.mozillazine.org/Problems_printing_web_pages

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• My Epson printer has stopped working with Firefox today. It test pages works on laptop and works with IE. Until today, he has worked with Firefox. Why can I not print anything from the internet with Firefox?

  Until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer will not work. I went to troubleshoot page and printed a test page. I uninstalled my printer and then re-installed. Still would not work from a Web page. I did a system restore. Still did not work. Called Epson. They say that it is a problem of Firefox because it works on the pages of specifications and testing. I installed IE and the printer works. What happened and how can I return to work with Firefox?

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...

• Firefox itself 3.6.9 upgrade and now I can't print anything from an open page, because HP Smart Web printing does not work with this version. What is an extension of replacement?

  "An unknown error has occurred while printing."

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

  The lack of compatibility of the HP Smart Web printing add-on shouldn't stop a printer HP to work with Firefox - all you lose is this stupid floating toolbar and adds some features.

  File > print or {Ctrl + P} should begin printing again, so all you have to do is make sure that the correct printer is selected, and then click the OK button.

  My advice is to try to the reset mentioned in this article.

• printer does not work it tells me not connected to the internet

  my printer just stopped working.it says it is not connected to the internet.it was before.

  Exact wording of this message?

• changed router photosmart b110 e-all-in-one printer does not work

  changed router photosmart b110 e-all-in-one printer does not work

  Hi aged60,

  I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

  I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

  HP wireless printing Center - Troubleshooting

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• HP Photosmart Plus B209a-m: I have already upgraded to Windows 10 not knowing my printer wouldn't work - now what?

  My printer no longer works. He said: it is not connected. It's a WiFi printer but I actually plugged in with a USB cable and it still won't print.

  I have seen rhe messages saying to wait at least 6 months after the release of Windows 10 for set to level, but as not, HP users were warned before the release of Windows 10, I already updated.

  My son was also a computer HP laptop that had problems with WiFi after upgrade, but a simple reg edit mentioned on your forum fixed that.

  Is this what can I do to use my printer before January? I think that it is an unreasonable amount of the time-out; especially that HP has never notified users to wait.

  HP must have published something of a fix because I downloaded an update this morning and voila - my printer now works as a printer wrieless!

• finger print scanner not working not

  I have a m6 evny. The strange thing is my scanner finger print does not work on the lock screen, but when I log in using the password, it will work then. Anyone know what is happening?

  FN + ECS should give you information about the product.

• Smart Web printing does not work in IE9

  Smart Web printing does not work in IE9...

  I tried option, uninstall web printing smart hp and reinstalled. now it works... also if you use a pop up blocker, then you have to give permission to allow access to this site. It will come up as a small secondary window and print as did former windows messages.