Commercial version of the Apex

Similar Questions

• remove the old Versions of the APEX

  IAM just wondering if there are problems when deleting old Versions of the APEX?
  I followed Versions in my (XE) database
  
  Apex 2.1-> FLOWS_020100
  Apex 3.0.x-> FLOWS_030000
  Apex 3.1.x-> FLOWS_030100
  Apex 3.2-> APEX_030200
  
  Now, I would like to remove the older versions of the apex of all applications that work in the new Version of the APEX.
  Is it okay to delete them like this:
  
  DROP user CASCADE FLOWS_020100;
  DROP user CASCADE FLOWS_030000;
  
  Or are there restrictions or problems that might ocure?
  THX so far

  Back up your database, you can proceed safely the following actions:

  DROP user CASCADE FLOWS_020100;

  DROP user CASCADE FLOWS_030000;

  DROP user CASCADE FLOWS_030100;

  Scott

• Version of the APEX 5 Interface/Look

  Hi friends,

  I checked the apex 5 early adapter. The interface is quite different because I work on previous versions. It is very difficult to work on version 5 due to the interface. Can I change the interface as version 4.1 or 4.2? Help, please

  Kind regards

  Dear Sir.

  Thanks for your reply. As I mentioned earlier the Page/interface Designer is quite different that cause difficulties for users of the older version. I think 4.2 interface should not be eliminated so that the developer can easily work side by side could work on the new version of the eye After some time, they will be familiar with the new.

  How can I change the view of the component if it is available in version 5?

  Kind regards

• Version of the APEX?

  Hello
  What is the exact version of APEX that comes with 11g Express Beta?

  4.002.8

  Thank you

  Tony Miller
  Webster, TX

  Never give up dreams!
  JMS

  If you answer this question, please mark the thread as closed and give points where won...

• Where can I get documentation for an earlier version of the APEX?

  We currently use APEX version 3.0.1.00.08, where I can get documentation for this version of?
  
  I can't only to find documentation for version 3.2.

  Archive of the previous version

• How to change the APEX 5.0 to an older version of the APEX. ORACLE

  Hello

  Can someone please help me change APEX 5.0 view older.

  Concerning
  Animesh

  Hi Anne,.

  Animesh Tripathi says:

  Hello

  Can someone please help me change APEX 5.0 view older.

  Concerning
  Animesh

  You mean component mode?

  You can switch between the display of component and the designer of the Page.

  Edit your page and check the icon at the top right of the page.

  Please check the screenshot.

  Kind regards

  Jitendra

• 2 versions of the Apex running on the same computer

  Hello
  Needed my client to run apex 2.0, apex 3.2 and Oracle 10 g R2 in a single box. Wanted to check if this is possible. If yes then could help me with the detailed installation process. If not, then pl justify.
  Prospects for a quick response.
  Thanks in advance,
  These

  Yes, you just install a database for each copy of the Application Express you want.

  Scott

• Download of previous versions of the Apex

  Hello
  
  We need to install Apex 4.0 on a test system and executing an upgrade to Oracle Apex 4.1 to ensure management that we can upgrade properly. My question is where can I download Apex 4.0?
  
  Thank you

  Http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/all-archives-099381.html here

• In the Apex version control

  We are fairly new to apex, and we plan to create a broad application using the latest version of the Apex.  We plan to use Subversion (SVN) version control tool.

  We have 3 scenes like

  -Development

  -Staging

  -Production

  Our plan is to use the same id of the workspace, the application id and the ID of page in all environments, so that we can apply individual for the pages of the application changes after the initial version is deployed in all 3 environments.

  The workflow will be development in the development-> Testing environment in staging-> deploy to Production

  What is a good way to make the Apex version control?   Is there any other better practical approach that we can use?

  Thanks in advance

  Hi Dragonia,

  Start with, you're in the right direction! The first (step 1) for control of current version of APEX is to have cloned DB systems for DEV/TEST/PROD. This ensures internal APEX IDs are the same in all settings and it will help us to detect only valid changes.

  Step 2: export the individual components of the APEX in sql files. Add them to version control.

  To export individual components of APEX in the form of sql files, you can use the Java utilities provided by APEX. These classes are under the folder path below APEX zip

  \apex\utilities\oracle\apex

  APEXExport.class - use this utility to export specified from the specified workspace APEX and DB application

  APEXExportSplitter.class - use this utility for dividing bulk single apex sql file into individual sql files (generates an sql for APEX component)

  Step 3: when changes are made, rerun the utility of separator and validate the svn changes (you can only commit files sql for components respective apex which you have changed)

  Step 4: build patches script to migrate following environment changes (the hard part!)

  There is no easy way to do this by their SUMMIT. You must take all the files of sql that you changed, and you must prepare an installation script to run all of these sql files. When you run apex splitter, it gives you all the parts of apex with a well organized with install.sql file folder structure. You can see this install.sql file to prepare your own patches script.

  Another difficult point is - some components of the APEX should be deleted before re-creating them. For example if you changed the page 10 and you want to export the following environment changes, then install.sql sample will be as below

  -- install.sql
  @application/init.sql
  @application/set_environment.sql
  @application/delete_pages.sql
  @application/pages/page_00010.sql
  @application/end_environment.sql
  

  And the contents of delete_pages.sql will be as follows

  -- delete_pages.sql
  SET DEFINE OFF 
  
  BEGIN
      wwv_flow_api.g_mode := 'REPLACE';
  END;
  /
  
  BEGIN
      wwv_flow_api.remove_page (p_flow_id=>101, p_page_id=>10);
  END;
  /
  

  And this isn't the end of the story. Some of the changes to shared component can be directly applied to the next environment using sql scripts generated by splitter apex (such as models, methods of application), but some of the shared components cannot be. We must first remove and then we have to recreate it using files sql generated via a dispatcher of the apex. And we need to go through the undocumented internal APEX wwv_flow_api care to know what procedure we use to remove that shared component package.

  Also when delete us a page, then all registered users reports public and private will be lost. So before you move your changes to Production, you should export user reports public/private and you should re - install Production DB after the installation of pages.

  To summarize, apex version control applications is not hard, but preparation 'delta script or patch' is very difficult.

  Hi joelkallman-Oracle, I do remember that you promised to publish a white paper ticket or a blog on this topic. It is already published. If so, can you please share the details. Thanks a lot for your wonderful support in advance.

  Kind regards

  Hari

• Apex_ir.get_report acting strange in the apex 5

  Hello world

  
  According to the guidelines of this thread, I've implemented the service recommended to manage the requirement.

  Dynamic action for "no filter selected" on IR

  This works well in the apex 4.2

  In 5 Apex, I get an error: ORA-06502: PL/SQL: digital error or value

  I spent hours trying to understand what is happening and the strange thing is that the function returns the correct value (as a number). When I remove the call to the function of my sql IR base then it starts to work, of course, does not have the functionality I'm looking for.

  Any ideas? I'm on 5.0.0.00.31

  Thank you!

  Hello

  had a look at the code of apex_ir.get_report, and due to some code changes necessary it will never work inside the international registration data source more. But I played a little and it seems that the following code does exactly what you want. But no guarantee that it works also in a future version of the APEX.

  create or replace function get_filter_count(p_application_id in NUMBER, p_page_id in NUMBER)
  return NUMBER
  AS
      l_region_id number;
      l_report_id number;
      l_count     number;
  BEGIN 
  
      select region_id into l_region_id
      from apex_application_page_regions
      where application_id = p_application_id
      and page_id = p_page_id
      and source_type = 'Interactive Report';
  
      l_report_id := apex_ir.get_last_viewed_report_id (
                         p_page_id   => p_page_id,
                         p_region_id => l_region_id );
  
      select count(*)
        into l_count
        from APEX_APPLICATION_PAGE_IR_RPT r,
             APEX_APPLICATION_PAGE_IR_COND f
       where r.base_report_id = l_report_id
         and r.session_id     = apex_application.g_instance
         and f.report_id      = r.report_id
         and f.condition_type in ( 'Search', 'Filter' );
  
      return l_count;
  END get_filter_count;
  

  Concerning

  Patrick

• JavaScript does not not in the APEX

  Hello

  I use the javascript code in the HTML header under the attribute of Page

  < script type = "text/javascript" >

  function test().

  {

  Window.Alert ('this is a Home Page');

  }

  < /script >

  But it's not showing any result.

  Can someone help me on this?

  Hello

  You don't mention what version of the apex, you work with.

  But when you change the page it has 3 sections for javascript.

  You can use function and the declaration of global variables and run when the Page loads.

  Put the function in the part of the statement (No.

• 4.2.3 - make apps install available regardless of the apex?

  I'm stuck 4.2.2 for a few weeks and I would like to see and/or use 2 new applications packaged in the same time (even if they are not supported on 4.2.2!) - can the sql export for them be made available?

  Are there updates to other packaged applications in 4.2.3 (like P-Track)?

  Download of APEX installation files contains the fxxx.sql of the packaged applications. I think you can install (import) if it is compatible with your version of the APEX.

  \Downloads\apex_4.2.3_en.zip\apex\core\packaged_apps

  The application of P-track, for example, is f7220.sql.

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• Install the APEX 3.0.1 on RDBMS 11 GR 2

  Hi all
  
  I was wondering if it is possible to install version 3.0.1 on oracle database version-11.2.0.3 APEX?
  We currently have a database 10g with APEX 3.0.1 installed. We must now upgrade project
  to install the latest version of the database. Unfortunately, we do not have enough time to migrate the
  Application of the APEX. This is why the APEX version should stay the same.
  
  If someone experiences with APEX 3.0.1 and RDBMS 11.2?
  (I searched the oracle documentation, but could not find anything useful.)
  
  Thank you
  Joe

  Joe,

  (1) the minimum version of the APEX, which can be used with GR 11, 2 DB is APEX 3.2.1. I know that this is not documented anywhere, but he had made 11 GR 2-specific problems so this SUMMIT could work in DB 11 GR 2. This minimum version is 3.2.1 APEX.

  (2) I don't think that there is a way you can avoid the update of the APEX. When you upgrade your version of the database, the DBUA will focus on what version of APEX you. And if the latest version is less than 3.2,1 APEX, APEX and then will be upgraded as well.

  My opinion - and it's probably not what you want to hear, but if you can't avoid the upgrade of the APEX, then you can consider as well the upgrade from 4.1.1 APEX before the DB Upgrade (to avoid too much change at the same time).

  I hope this helps.

  Joel

• in the APEX by clicking on the link hyper does not trigger session timeout page

  Hi all
  I have a question about the application of APEX session time-out. I created a simple application of the APEX. In the region report SQL section, I have code like this:
  
  SELECT DOC_Name, DOC_URL,
  "" < a href = "" | DOC_URL | "target ="_blank"/" > download < /a > ' pdf_link
  FROM test_table
  where emp_number = 00010001
  
  When the user click on the hyper link, it will show the landing page for the user (for example if DOC_URL = 'http://forums.oracle.com', it displays the oracle forum page in a new browser).
  
  But the problem is that after the user session timeout (I set to 240 seconds through shared components > change the security attributes, I put max the session for example 240 seconds timeout) when I click on this hyperlink, it does not raise my session timeout page and it still shows the page (oracle forum page).
  
  Why in the APEX by clicking on the link hyper does not trigger page session timeout after the user session timeout?
  
  How implememt or fix to trigger the session timeout page after clicking on hyperlinks?
  
  (BTW, our version of the APEX is 3.2)
  
  Thank you!

  Hello

  rather than use your my_stored_procedure you could call a new APEX page where you have a page called P999_PDF_ID. On this new page you would have
  treat a front header PL/SQL with the same code you have in your "my_stored_procedure". The only change would be to add a

  apex_application.g_unrecoverable_error := TRUE;
  

  at the end of your code as well as APEX does not generate a standard page of APEX.

  That's all. If a user clicks on a link, APEX will check the session timeout and if everything is ok, download your PDF file.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf