2 versions of the Apex running on the same computer

Similar Questions

• Can I run Release Candidate (19.02), Beta, every night, Aurora and ESR versions on the same computer?

  I know that I can run the version beta and all night together on the same computer because they are installed in different directories. What I do then, is that I have a profile for each version. What I do is that I've flown FireFox.exe - ProfileManager when I start either the beta and nightly builds.

  My Question is can I also install the Aurora, the Release Candidate and versions of ESR on the same computer as I do with the beta and every night? If so, how should I install in different directories? I create new profiles for each version. What I can do, is copy in my original profile to newly create profiles so that I can keep all my plugin/addons, themes, bookmarks, etc. of the same.

  The next question, (I think I know the answer but I just want to know that) now I can synchronize my favorites from each of the different profiles I created?

  Secondly, I have now I can do the ABOUT: CONFIG in the address bar of Firefox, anyone have an idea where I can read about what each entry means? Also, are there other secrets in Firefox, similar to the tip ABOUT: CONFIG? I know an app where you can do ABOUT: ME, but this is as far as I know.

  I know this was asked of billions of times, but I also have to ask. Is it possible at all that Firefox, Thunderbird and Seamonkey will be never out to the Apple iOS? I know it's impossible, but maybe someone MIGHT have some thoughts on that?

  Finally, I know this is off topic, but I'll give it a shot. I use Outlook 2013, does anyone know if Outlook can manage discussion groups? The reason why I asked is because I'm just learning that there is a ton of focus groups for Firefox, ThunderBird and SeaMonkey. Somehow, I would get these focus groups in Outlook 2013. I already get allot of flows for other things, so this isn't a problem.

  I would much appreciate it if someone could help me with these questions.
  Thank you.

  See for more information the performance of several different versions of "Firefox". Firefox, Beta, Aurora and nightly installed everything like "Firefox" in their own country.

  http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2249039

• If I install pse 8, I'll be able to use previous versions on the same computer?

  I have PSE 4 x (86) installed on windows 7 64-bit programs. I have PSE 8 comes with a CanoScan scanner. I understand that I can't have both open at the same time on the same computer. However, if I close 4 PES, I'll be able to open PSE 8 on the same computer, and then use both with full function?

  While surfing, I fount this quote from a person who reviewed the PSE 8;

  http://www.Amazon.com/review/R3RXGF78TR8WHD/ref=cm_srch_res_rtr_alt_5

  "To install, the PSE 8 recognized PSE 6 was already installed. It does not force an uninstall of version 6, but eventually invites you to select the version to use. I chose 8 PES, and completed without incident the PES 6 uninstall later. The installation routine will advise you that you can uninstall the version at any time, but you will need to select which version to run. »

  So, does this mean that once I chose the option of the EP version 8 when installing, I won't be able to use 4 PSE? Again, I intend to have only a PES open at the same time and close a version before I opened the other version.

  I really love PES 4 and ideally, I want to be able to use the PES 4 and 8 of the PSE on the same computer. Either 4 PSE opens by itself; PSE 8 or by itself.

  I hope that I was clear and appreciate any advice at all. Thank you

  ausetcat2 wrote:

  However, if I close 4 PES, I'll be able to open PSE 8 on the same computer, and then use both with full function?

  Yes.  Each version is standalone, standalone application.

  Ken

• LR Photo import from the camera all of a sudden does not (5.7.1) - says "some import operations were imported not because they could not be read."  Work on another computer and the version on the same computer but not newly LR 4.3 installed LR 5.7.1 cm³ 2

  As above, all of a sudden, on a single computer I can not download from the Canon 50 d or 70 D in LR 5.7.1.  It will download on another computer, as well as on this computer in an older version of LR (4.3).  As soon as I put on the computer this morning, I also got an error message that "the catalog named Lightroom ' catalogue Lightroom 5" cannot open another application already opened it. "It's a cold start, so I'm not sure what's going on.

  "Could not be read" means that you do not have a WRITE permission in the destination directory, then change your permissions.

  "Another application already has its opening" can be solved by removing the .lock file in the same folder as your catalog file.

• On the first: can CC Adobe and Adobe CS6 both run on the same computer?

  Hi, I have the Adobe Premiere CS6 installed in my computer.

  But now, I'll finish the editing of a film that someone already started to edit.

  This person worked with Adobe first CC.

  Question: if I install Adobe CC in my computer, the Adobe CS6 will still be run?

  Can CC of Adobe Premiere and Adobe Premiere CS6 both run on the same computer?

  Of course, you can run all versions of the same computer, even you 2014 CC, CC as well as 6 CS on the same computer.

• Is it is possible to always run an earlier version at the same time as Acrobat DC?

  I have plugins that I need that do not work on domain controller. Is it possible to always run an earlier and under Acrobat DC version at the same time? Or should I downgrade to the previous version somehow? And how do I that Creative Cloud?

  Hi dv8kiwi,

  Please note that once you have installed Acrobat DC on your machine, it will automatically uninstall any previous version of Acrobat is installed on your computer.

  You might check out this link to KB doc for more details on the same below:

  Try Acrobat deleted the previous version

  If you still want to downgrade to the previous version, then you will first need to uninstall Acrobat DC and then install the version of Acrobat that you were previously using.

  Please also indicate if you want to install your previous version of Acrobat using Creative Cloud or something.

  Let me know.

  Kind regards

  Ana Maria

• can I use two versions of Fire Fox on the same computer, the latest version and an older version. (I need an older version of my software work)

  I need to work at home and it is essential that connect you to a site that is possible only with an older version of FireFox. I always download the last update. So I want to know if I can use both versions of Fire Fox on the same computer. The most recent version for my car and an old version

  See this article on how to install multiple versions on Mac OS x:

  • http://www.BusinessInsider.com/how-to-run-Firefox-4-and-3-simultaneously-in-Mac-OS-x-with-multiple-Firefox-profiles-2011-3

• You can run Combat fs3 and fsx gold on the same computer?

  I am running windows vista (Service Pack 2) and fsx already loaded gold - now I wanted to add beautiful b17 of memphis but there is no compatibility with fsx so that it is compatible with combat fs3 I would load cfs3 as the basis to install b17. I know it is not possible to run two versions of fsx on the same computer and I worried if cfs3 fsx would corrupt each other it be someone knows it please?

  Hello

  You can install Microsoft B17 in compatibility mode to run older programs in compatibility mode check out the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Unfortunately, it is not possible to install combat fs3 and fsx gold on the same computer to the same computer.

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Is it possible to install 2 versions on the same Mac?

  I want to install the first 5.5 and 6 on the same machine (10.8.2) - is it possible or corruption happen?

  AM I better running under different user accounts?

  Thank you

  Nick

  Yes, you can run multiple versions on the same machine.

  Install everything as administrator.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song.

  Why does my 7th generation nano play different versions of the same song (acoustic, demo, replacing) one after another before she switches to a different song?

  Maybe the current list of the song has the songs listed in alphabetical order, and you have the iPod nano to play in the order of the list...  How do you think iPod nano to read the list of songs?

• How to compare the 2 versions of the same document in Pages?

  How to compare the 2 versions of the same document on Pages?

  There is no OS X Visual tool which can open two Pages document and show the differences between them - other than the human eye.

  What information are you interested in identify as different between the two documents? What specific version of Pages?

• You name the Windows/system32 directory, such int files: shlwapi (4) (2) .dll? I have a lot of files in system32 that look like this often 3 or versions of the same file?

  You name files in the Windows/system32 directory, such: shlwapi (4) (2) .dll?  I have a lot of files in system32 that look like this often 3 or more versions of the same file?

  Hello

  1. you are trying to move files in and out of Windows\System32?

  By default, windows has not usually (4) or (2) and if there are several files that it can be indicative of a program to move files if you do not have them.

• How to publish a free and a paid version of the same application at the same time?

  After a few days of struggle, I have made some inroads and have a lite version of my application as a project on the supplier portal that I tested (and it works). I can make now any time be reviewed for publication. But I also have a full version of the same game I want to publish. When I downloaded the zip file with new bar he told me that BB ID is already in use (or something similar).

  Has anyone here released a free and a paid version of the same game? Should I get a token using an another BB ID (I just need to do for it)? and then what happens, I'll have to operate from two separate accounts (portal provider) or how it works.

  Any ideas much appreciated.

  @jussumman You can and should submit all applications under the account of a vendor.

  You receive the error message simply indicates that the Package ID is already in use. In other words, you cannot have the same exact .bar file argued that two separate applications.

  You have two options:

  1 submit a free app and have in-app purchases to sell upgrades

  2. use a different package name to the second application.

  The package ID is from the appname and signature keys. Since you use the same keys for all applications of signature you must have different package names. This will allow you to present applications separate applications under a single account.

• Please help me to orgnize different version of the same application

  Hi all

  It is so messy for me to create a different version of the same application to different platform, to touch, to not touch.

  Can someone help me understand how to manage the same code base for all versions. In addition, we manage all the new functionality of the platform. These things also create headaches by signing the application. With JDE plug-in in eclipse, we are not able to understand, how we will do it.

  Please help me.

  Thank you.

  Adarsh Pandey

  Hi Alaka

  You can make use of the Macro.

  Suppose you want to have the same code base for touch and non-touch devices. You can define a macro saying IS_TOUCH. now in the code, you can put a brake, if this option is enabled, then include the key code that include no button code.

  We had done the same for "BOLD" devices and the storm.

  You can give it a try, in the same way, you can have separate devices also Macro.

  Thank you

  Ankit