Communication between Nughtly and HP printer pro 8620

Similar Questions

• What are the differences between RT and Win 8 Pro?

  RT

  What are the differences between RT and Win 8 Pro?

  Windows 8 - this runs on processors traditional x 86 - x 64 for Intel and AMD, and the same apps that runs on Windows 7, Vista, and Windows XP.

  Windows RT - built on the same basis as Windows 8, it works on a different processor called ARM and not running programs in Windows 7, Vista, or Windows XP. In addition, it comes with Microsoft Office 2013 while Windows 8 does not work. It only comes on the new devices, in contrast to Windows 8 you can buy a license for an existing computer.

• Error: There is no communication between computer and printer

  Original title;

  printer not printihg after the installation of new updates

  I get messege there is no commacation between computer and printer

  Hello

  1. What is the brand and model of the printer?

  2. What are the updates that have been installed before the show?

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  3. have you checked the status of the printer in Device Manager?

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  4. what operating system is installed on the computer?

  You can Open the printer Troubleshooter and check if it makes a difference:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can follow this link and check if it helps.

  Printer in Windows problems

  Let us know the result!

• Series communication between computer and cRIO

  Hello

  I am not new to Labview or cRIO programming, however, venture in for my first try at the serial communication.  I have a controller (not original NOR) that sends data over a serial RS232 network I want to open a parallel session to the data that I collect with a cRIO.  Before we get to integrate, I try to test with a series, my computer cable and hyperterminal communications and the serial port cRIO.  I followed and validated exploitation and drivers with the following text:

  How to do a loopback Test series
  http://www.NI.com/white-paper/3450/en

  However, when I try to use the following example, I get nothing:

  Transfer data between cRIO and host series
  https://decibel.NI.com/content/docs/doc-3816

  Any ideas on where to start?  I appreciate very much all the advice.

  Thank you.

  I have confirmed that it is a right.  I'll try a null-modem cable.

  Thank you!

• Communication between Labview and Rn42 Bluetooth

  Hello

  I am currently working on a project that requires communication between a bluetooth equipment and my pc with bluetooth built-in. The bluetooth hardware is verfied working with Blueterm on android. However I'm unable to connect with my laptop blueterm. Is back a unabe to connect error. I use bluetooth vi without series or visa. This method is suggested? Thank you

  
  

• Communication between virtual and real session

  A virtual session may communicate information to the real machine? In other words, if a virtual session running can I send a message or a text to be saved on the actual computer?

  I'm under v VMWare Workstation 7.1.1 on a PC running Windows XP Pro.

  Sure! I'm not sure what exactly mean you by 'send a message or text' but you have several options:

  By default (depending on how your virtual computer was created) under the virtual machine settings > Options > Guest insulation, Drag and Drop and copy and paste are enabled. This allows you to freely drag and drop and copy and paste between guest and host operating systems. If these are not enabled, you can activate them. It's one of the ways safer and easier to share data.

  You can also create, under the ' Virtual Machine Settings > Options > folders ', a file shared between the two. Although some do not recommend this for reasons of performance and security.

  You can share files over the network by using shared folders, just like any physical PC 2 would be to share files. If you don't know how to do this, there are a lot of tutorials on the web.

  It is a bit more advanced, but you can also share a real physical drive (see the user manual). It is the least secure method, but offers the best performance if you regularly share huge amounts of data (several tens or hundreds of gigabytes).

• Communication between TNS_Listener and the listener of the Apex

  Hi all
  I how communication between TNS Listener, receiver of the Apex and Apex? For some reason, I got the following error of Apex listener:

  Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
  .
  .
  .
  Caused by: oracle.net.ns.NetException: Listener refused the connection with the following error:
  ORA-12505, TNS:listener does not currently know of SID given in connect descriptor

  I truncated messages Java object.
  
  This has happened when I tried to connect to the Apex. So I can fix it by going to:

  http://localhost:8080/apex/listenerConfigure

  then everything worked fine.
  
  My listener.ora file:

  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
      )
    )
  
  ADR_BASE_LISTENER = /usr/local/oracle
  
  ADR_BASE_ORACLE_LISTENER = /usr/local/oracle

  My tnsnames.ora file

  INARA =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = inara.snowdrop.com)
     )
    )

  When inara is the name of the instance and the firefly is the host name.
  
  Is that the order of start if first the TNS Listener or listener Apex matter first?
  
  Best regards
  Val
  
  Published by: Valerie good-natured August 1, 2011 05:47

  Hi Val,

  My tnsnames.ora is configured for an existing server and there is no client configurations like sqlplus, sql or earpiece of the apex developer. However until now the server can connect to customers without problem (I just discover that unreproducible error on 'impossible to find the SID' sometimes occurs at the beginning of the Summit, the kick-off and can be solved by waiting for a while to connect to reconnect), so again I must modify the .ora?

  No, if your database listener is configured properly (i.e., he listens to the SID that you try to connect to the network interface/hostname/ip address /... she must use), there is no need to make any other configuration, especially not on another machine.

  -Udo

• Strategy for sharing media between Mac and Windows Premiere Pro

  I hope that I write in the right forum, it's here or in the hardware forum.

  I'll take the plunge and get a pretty high-end PC to increase my aging Mac Pro for Premiere Pro CS 5.5 (and probably 6 CS as soon as the kinks are developed). Right now my online media resides on several trendy readers fast eSATA RAID 5, on my Mac Pro through some eSATA PCI cards. It works well and I have pretty good bandwidth of 200MBS to 250MBS using this method, I think enough speed for the type of media that I use in my changes, a combination of XDCAM EX, AVCHD, H.264 Canon with maybe 4-5 rivers both in Multicam edits.

  Adding from my PC to the combination will complicate things. I want to be able to access the media on my eSATA drives, which are currently formatted for Mac, using filesystem HFS +. I heard that the Mac drive can make Windows well read this file system.

  The issue is sharing this media on drives fast enough for both systems be able to modify / access simultaneously. I do not have Gigabit ethernet, but I don't think it would be pretty quickly, I think that practically it tops on about 70 MB/second. I probably need more speed.

  Also the Mac can share than the SMB protocol, but does not seem to the current Mac OS 10.7 sharing SMB very well but I test it with Windows. I know for my various boxes of media player, it does not work very well, or at any time to access my Mac 10.7 system via SMB. In addition, SMB seems to be a very slow network protocol. I can share via AFP or NFS, and I think that NFS is the speed you need, do not know if Windows out of the box can cope with this Protocol.

  I know there is such a thing as "fiber channel" and other mainly tech to create a fast network, the Mac can also network via Firewire, but I don't think it will be enough or fast. I guess I could see if it was faster than Gigabit ethernet protocol using Cat 6 or what is the last type of ethernet cable. I am doing a shortcut here and see if the large number of people did and what they think works best.

  Thanks for all the tips here.

  Kind regards

  -Keith

  I guess there are a lot of variables, but change us on a network using the SMB and Gigabit Ethernet and working with fairly similar media (XDCAM HD 422, XDCAM EX, AVCHD or H264) and it works fine. We have two servers sharing between 3 and 4 editing suites. I think that if you are just sharing between two machines, it should be sufficient.

• Communication between LabVIEW and MCU based on Modbus Protocol

  Hello

  I am a first year student in the port.and series applications see you, my projiect needs to communicate between LV and MCU based on Modbus Protocol.all configure it are correct, but the lv to send false information which is not suitable for modbus.i do not know how to fix it.

  My programs are:

  Why did you decide to write your own code instead of what is already available? If you had done a search, you would have easily found the modbus library. Just give a try.

• Communication between computer and printer problem

  Why can't I print my documents, they go into the queue and do not print?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• The difference between Standard and Adobe Acrobat Pro XI?

  Adobe Pro Adobe Standard XI XI the same thing?

  Hi tomshu .

  Visit this link that explains the difference between Acrobat Pro XI and XI of Acrobat Standard: Plans and prices: compare the versions. Adobe Acrobat DC

  Thank you

  Shivam

• Communication between Labview and Acton spectrometer via USB or RS232

  I'm trying to communicate between a PC running XP and a spectrometer to Acton 2300i using Labview.  Windows recongizes the specification and assigns it to COM3 with the correct name.  Also, the software provided with the specification can communicate with him.  However, I was unable to communicate using VISA in Labview.  I downloaded the simple read and write example vi fromt the example finder and changed the entries at 9600 baud... but I am still unable to connect.  I also tried connecting via software of measurement and automation NOR, but getting the timeout error code.  I was able to connect using GPIB of Labview for another more old Acton Spec 500i but the onle new version connects via RS232 or USB.

  The problem was simply not having a return of carrage added at the end of my order.  Thank you for your help.

• Speed of communication between workstation and server

  Is there a way when I access my router settings that I can increase the amount of time it takes to run a report on the data of my server?  All I want to do is run a report of 100 emails or more leads is entered in the database today.  But it takes so long for the server to send this info to a spreadsheet on my workstation.  Don't you think that it is a router issue?

  What is the number of your router model. These are settings that you can set your may be this could solve the problem. If you have a firewall or an Antivirus on your computer try turning it off. Login to your configuration page of the router and under configuration tab change the MTU to 1365 size and click on save settings. After that you can try to transfer the files between your computer and check how his work.

• Loss of wireless connection between Mac and Office jet pro 8500 has more

  My printer has been successfully implemented with my mac but loses the wireless connection.

  I'm on OS X Lion (but the same problem happened with Snow Leopard).

  My router is provided by BT Vision.  Also on the original hub is an apple TV and phone 3 handsets.  I don't know what channels to use them and do not know how to find out.

  Network Setup page shows no problem, but the mac cannot connect to the printer.

  Any suggestions please?

  If the printer has a valid IP address (not 0.0.0.0 or 169.254.X.X) then it is always connected to your network.

  If your router is a BT HomeHub, you're not alone.  A lot of people on these forums have had trouble with them and most of them that I couldn't help.

  The only kill-TI-dead solution is to buy a standard router (Linksys or Netgear), attach it to your BT and connect everything to the new router.

• Communication between plugin and AcroJS

  Hello

  (1) me and my colleagues are trying to communicate between a plug-in and script objects.

  We have decided to do so through PDField. After the hard work and attempts, we have created

  a field via the plugin and the value of the field can be seen the the AcroJS

  calls. The problem is that the AcroJS is unable to set the value. Why?

  (2) is it necessary to remove the object from PDField once it is no longer necessary.

  We don't care if it is updated in the document, but want to know if

  cleaning and setting/free to use API calls.

  (3) if the cos objects used to create field released?

  Kind regards

  EmergentTime.

  A PDField is an interesting approach, but not recommended for many reasons - the XFA is just a case of edge question.

  The best solution (since it is not dirty the document and allows the richest data storage) is to use a global variable in JavaScript.

  Second best would be to use metadata to the document level.

  And there are several other methods as the data in JavaScript object.