Communication problem series with 321 Lakeshore

Similar Questions

• Communication problem series with USB serial Hub

  Hi, I have a communications problem when I use an NI USB - 232 (778472 - 01) adapter to control a pressure sensor. There are a lot of posts about it in the forum, but I calmly something a little different. I can't use MAX to control the instrument with the VISA test Panel. So I guess that the USB-232 driver is correctly installed. However, in labivew, even if I choose the instrument source of visa name, it always returns an error (-1073807339) when I run the program. The screenshot of the labview program is attached. Could someone kindly help me with this problem. Thank you very much.

  The system is XP SP 3 Pro.

  The version of Labview is 8.6.

  The MAX version is 4.5.0f0.

  If port by default windows settings exactly match the settings you need for communication, you can get lucky and it will work.  If only one parameter is different, it won't work.

  It is always better to define the parameters in your code.

  Shane.

• Communication problem series

  Hello

  I want to order an instrument via a Labview serial port, but I am unable to communicate properly with him.  It works perfectly when I use Hyper Terminal, but as soon as I use the ' basic series write and Read.vi ", I have a timeout problem.  'Write' does not give me an error, but the "read" never works.  Unfortunately, no or the controls seem to work.  That seems to be a communication problem.

  Here are the parameters of communication for this instrument:

  Baud rate: 115200

  Data bits: 8

  Stop bits: 1

  Parity: None

  Flow control: no

  Charaters termination: \r\n

  By MAX, the communication port is OK and I am able to open the test Panel.  Howerver, I'm not able to access information when I ask a query, or there is no action to simple commands.

  Thanks for your help

  StarFiber wrote:

  I used the example of LV2009: Advanced Serial write and Read.vi.  Just to make sure that I don't have a mistake in coding. I just did the current value as a default value, so you can see what I actually sent to the instrument.

  I guess that you do not actually send * IDN? given that it is not even a command that is supported by the instrument.

  The Canadian standard requires that you cancel orders in writing with BOTH a \r and \n. Using the 'end writing with stop character?' only the \n is sent as it is what is on the stop character. It is unclear how the device responds, or not at all, if she did not see the \r and \n. So disable this option, the "string to write" play to display in '-' codes mode (right click and select in the context menu) and enter the command, followed by \r\n. otherwise, you could leave this option on, but you must make sure that you add \r to your order in the text box "string to write.

• Communication problem with the printer

  I'm trying to print on a printer Lexmark 1200 series of a Toshiba laptop. Laptop computer identifies the printer is the printer is displayed in the control panel. Whenever I try to print even if I get a message that says: "communication problem with the printer. Any help is appreciated.

  Hi Nick,

  1. What is the exact model of the printer number?

  2 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that some of the 1200 Series printers is not compatible with Windows 7. You can enter the number of exact model and research for more information.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=lexmark%2B1200%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If the printer is compatible and you are always faced with the question, you can proceed with the steps.

  Method 1:

  Run the troubleshooter and update printer drivers.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  If the problem persists. I suggest you perform the steps described in the article.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  http://support.Lexmark.com/index?page=content&ID=SO4473&locale=en&UserLocale=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. Therefore, make sure to activate the firewall and security software once you are finished with the test.

  Hope this information helps. Response with status so that we can help you.

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• I bought a book of game Google and downloaded the CMHA on my desk. When I try and open it with my Adobe Digital Edition, I get the error message "license make mistake. "License server communication problem: E_Stream_Error.

  I bought a book of game Google and downloaded the CMHA on my desk. When I try and open it with my Adobe Digital Edition, I get the error message "license make mistake. "License server communication problem: E_Stream_Error.

  Response to SMcLeod8:

  Hello, I managed to solve my problem of E_STREAM_ERROR regarding the Google Play ebook. The short answer is to use ADE 4.0.3.

  When I met the problem of the E_STREAM_ERROR, it is with ADE 2.0.67532 on Windows 7 (and this had no problem handling the Kobo CMHA, OverDrive files, open a library and a sample epub BCAM from Adobe itself). This is why I would not upgrade my 2.0.67532 to the last 4.0.3. Instead, I used another Windows 7 PC and installed ADE 4.0.3. On my first try, I allowed the 4.0.3 without ID, and there was an error E-GOOGLE_DEVICE_LIMIT_REACHED. I then allowed with the Adobe-same ID * as my 2.0.67532 PC. It worked as I could get my epub from Google.

  As I don't expect a response from Adobe technical support, I guess that now Google license servers do not work with Adobe 2.0.3. I hope this will help you solve your problem - at least to get your ebook in ADE first.

  However, I would be careful replacing 4.0.3 of my 2.0.67532 I wouldn't be surprised if the latest version will not work with other suppliers of epub for social mobilization. For me the upgrade to the latest version of the software is never the best solution - it could solve a problem, but creates another.

  Note: * I understand that you can authorize up to a total of six computers with the same Adobe ID. Not sure that this policy is still standing.

• Serial communication error VISA with LUDL stage controller

  Hello

  I'm trying to control a micro-positionnement made by Ludl stage. The model is Ludl MAC2000. It seems that the RS232 comunnication is implemented because I can talk to the controller using HyperTerminal. However, when I want to do the same thing through Labview, I can't answer the controller at all. The vi is roughly the same as the visa basic read/write in the example. Looks like a very similar problem in this post:

  http://forums.NI.com/T5/instrument-control-GPIB-serial/visa-serial-communication-problem/m-p/567065#...

  But the trick of nature of endpoint does not help in my case: I tried to toggle the termination character setting in the property node and different combinations of '\r', '\n' as termination characters, but nothing has worked so far.

  Seems to me there is some difference between the interpretations of the same order to Hyper Terminal in Labview. But I just can't understand what it could be.

  Anyone with a similar experience could give me some comments/suggestions? Thank you very much!

  Another difference between hyperterminal and labview is the speed of sending characters.

  LabVIEW breaks out the whole string to the controller

  HyperTerminal is this character by character. So much slower and slow the controller can be affected by this.

  You could add a loop around the writing of visa (to make it easy convert the string into a byte array outside of the loop and convert it to a string inside and you have a shipment char by char in LabVIEW

• Problem-solving with games on windows 7

  I have problems with the games running in mode full-screen. I've always set continental as the lowest for better performance but when I changed the resolution what that it is less than 1366 x 768, I lose about 3-5 inches of space on the screen on both sides. I solved it once (don't know how) but I had to completely reboot my computer everything. Help, please.

  I am runing a TOSHIBA Satellite L455D with an AMD Sempron (TM) TR-42 2.1 GHz

  2.00 GB of ram

  32-bit system

  an ati radeon 3100 series with the latest drivers installed

  Thanks to extensive research and experimentation, I found the solution for ATI cards.

  In order to make the games on a smaller to adapt to the entire screen resolution, you must change the settings in the catlyst control center or CCC for short

  to do this first open CCC making Sure you are under the ADVANCE options

  now, go to desktop properties and change the resolution to one that is less than the native resolution of your screen.

  now go to the screen of desktop computers and screens. Right-click on your MAIN monitor (in case you use 2) and click on configure.

  Now you should see some tabs. go to the tab under what it should be several options avalible who say full-screen centered (or sometimes maintain proportions) the attributes, click on full screen, then click on apply. NOTE: If the options are grayed out always try to go to another lower resolution, if this continues to be gray, consider reinstalling or updating your drivers.

  now reset your resolution to its native and start a game that does not whole screen. your moniter should now be completely 'filled' with the game.

  Please note that some games still does that way because of the programming of the game. Include peggle deluxe, bejewled, bejewled 2, plants vs zombies and other similler arcade-style games.

  I hope this helps.

• On the Sync Palm m500 using connection series with a dock under Windows 7

  Palm: m500

  Link: Serial (cradle)

  OS: Windows 7

  Problem: Palm Desktop 4.1.4 cannot be installed and does not synchronize Palm Desktop 6 using the serial connection.

  How can I synchronize the m500 using connection series with a version of PD under Windows 7?

  Nevermind, helped http://forum.brighthand.com/sync-windows-palm-os/261651-synching-legacy-pim-databases-palm-desktop-v-6-2-a.html .

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• Windows Media Player will not play a DVD, I have a series with yellow mark Driver

  I got it, (cannot display the web page) twice, once when I updated one of the display, drivers, (I didn't roll back to the old.. 2nd time, I found that (work offline) to int, Explorer, had checked sort.)  u can tell me what that non plug and play, pilot of the series might be for? I see the same driver identical series with yellow mark, it does not prevent me to get online, is the only problem I have, Windows Media Player, do not play a DVD!

  1. check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the CD/DVD drive and expand the drive, double-click the sub element to check if an error message or error code is listed.

  2 install the updated firmware for the drive and check if it helps. Link:

• Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  I recently installed an Epson L555 instead of my Epson L355, which worked well with my software windows 7 and my BACK program based. However, whenever the L555 turned the printer just keeps ejecting the hopper pages until it is empty. On the menu screen, it says "printing", but there is nothing in the print queue and I didn't send anything to be printed. Sometimes it reads "Fax set auto answer. By pressing the Stop/Reset button stops the ejection pages and "Cancel" is displayed on the screen. This continues for about 2-3 minutes, then the pages start ejected again. Problem does not occur when it is not connected USB so that it looks like some sort of communication problem. The L355 worked perfectly.

  Hello

  Thanks for posting your query in the Microsoft community.

  I understand that print jobs are getting cancelled and I will be happy to answer your query. There could be several reasons for this cause and to diagnose the problem, initially, I ask you to refer to the suggestions in the article below and check.

  Solve printer problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Mouse Microsoft and new mouse came with the PC not communicating is not with the PC.

  Original title: Microsoft Mouse

  My mouse is not always communicate with my PC.   I have to click several times.   For example, clicking as Facebook takes a few clicks.    The CD that came with the mouse is for Intellpoint 4.0 and Windows 8 does not work it says there is a compatibility issue.    Even if I use the new mouse comes with the new computer, it seems to be communication problems.

  Thank you for the response, I really appreciate it.

  I went back to the HP comes with my new computer mouse and now it works fine.   Guess the little Gremlin take the road.    I like better the Microsoft mouse, but oh, well.

  The model number on the back of the Microsoft mouse is: P/N X 802382-002 PID 56180-523-0661404 - 2.    It worked when I had Windows XP, but does not seem to be compatible with Windows 8.

  I wasn't getting any error messages with the new HP mouse, everything seemed to work when he wanted to.   But now that I switched to it, it works fine.