Similar Questions

• the NI 9871 serial ports appear also in MAX with built-in serial ports of the target - under devices and Interfaces IS NOT? NO NEITHER 9871 (Scan Interface)?

  Hi - Have cRIO

  Can someone help me get the NI 9871 (Scan Interface) work?  My two 9477 and two 9425 and 9403, function with the scanning Interface.  In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed?   Project, 4-port RS-485 NI 9871 is in slot1?  Any help appreciated thanks

  the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces

   

  NEITHER 9871 (Scan Interface)

  I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports.  Something is misconfigured in Slot1?

  Solved!

  Thank you

• C50D satellite - black screen with code series

  I just changed on my computer and it came with a black screen with a series of code

  series of code?
  What is the text that you see?
  If you google code, you can find the solution.

• Skype on tv through ipad2 with hdmi adapter?

  Is it possible Skype on tv through ipad2 with hdmi adapter? I am attentive 4 my 94-year-old father who has low vision & hoped us could buy the hdmi adapter to use Skype on his big screen tv. It has the Skype app on his tv, but for that we would have a limited use won't have to buy a TV camera. TNX for any suggestion,

  I have connected my iPad 2 to my led TV via an adapter (HDMI) Apple, Skype running AV, it works well. Transfer the image and the sound of the iPad to tv. The microphone is built into the microphone of the iPad 2. I also used the bluetooth headset at the same time, it also works very well.

• Satellite Pro A - screen hinges compatible with M series?

  Anyone know if the hinges of the screen for a series of Satellite would be compatible with M series?

  See you soon

  Hey Buddy

  I think that no one here is able to answer your question because it s only a user to user forum and that you won't find here an authorized service provider or cell phone technician sorry!

  But let me give you a little advice: contact the vendor of services authorized in your country. If you call them it only takes a few minutes and I think they can answer your question.

  Good luck!

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.

  Change outlook web mail
  

  I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.  Not sure how they get along with the different email address.  I tried setting up separate accounts and profiles in outlook 2003 and have also tried to separate identities and accounts in outlook express 6.  Any help would be appreciated. TKS Joe Novick

  I can't speak for Outlook, even if it is very similar, but if you have configured the real separate identity in OE, as in needing to switch identities with it, avoid a problem unless you use both the same e-mail address.

  If you use different addresses to your identity, go to tools | Accounts and remove its identity. Vice versa in its identity.

  I use Cox and were three addresses in the three identities without problem.

• Computer not communicating is not with the TV

  Computer not communicating is not with the TV (Panasonic Viera) via an HDMI cable. It was, and then he stopped. Do I need a driver or something? Help, please

  Computer not communicating is not with the TV (Panasonic Viera) via an HDMI cable.  It was, and then he stopped. Do I need a driver or something?  Help, please

  Hello
   
  1. what exactly happens when you try to play TV on computer?
  2. don't you make changes before the show?
   
  We recommend that you first of all to you allows to cross check if the connections are correct.
  Connect your computer to a TV: http://windows.microsoft.com/en-US/windows-vista/Connect-your-computer-to-a-TV
   
  Please provide us with more details on the issue, so that we can better help you.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Communication not available with Lexmark 3600-4600 printer in Windows 7

  I recently updated my laptop from Vista to Windows 7 Home Premium.

  Since then I can't print anything on my Lexmark printer. The laptop recognizes the printer and everything seems normal until about 5 seconds after I click Print I get an error message (see link below)

  http://img256.imageshack.us/i/desktopvh.PNG/

  I tried everything listed on this message. I tried using the Service Center Lexmark who suggested adding the 2 exe files to my exceptions list on my firewall I did. I even tried printing with the firewall off the coast. I've updated the drivers from the Lexmark support site and again, I get the same message.

  Any help and advice would be greatly appreciated.

  Problem solved for Lexmark 3600-4600 series printer:
  I managed to solve the problem with the series of printers Lexmark 3600-4600 today. The standard user account that I was using was corrupted during the upgrade from vista to windows7 therefore could not print. Under the admin user, I was able to print. I also created a new standard user account and it worked (I was able to print). According to experts windows7 upgrade corrupts the existing user account. Therefore, set up a new user account and try to print, it should work.

• How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  Do the yin/yang. Shift drag a copy some distance away. Create a blend between the two stages specified. Draw another line. Use the effect > transform > Zig - Zag with enough height and number of steps and smooth anchors. Expand the appearance of the effect. Select the mix and the wide range and the object > blend > replace Spline.

• Possible GPIB communication through interactive control of Visa, not with Labview

  Hello

  I have a communication problem with Labview with GPIB instruments (with functions of visa).

  I get:

  "Error 1073807298 occurred at the VISA opening

  Possible reasons:

  "VISA: (Hex 0xBFFF003E) failed to perform operation due to i/o error."

  However, it works with an interactive control visa and this is where I am confused!

  Here is my setup:

  -Labview 2011 assessment

  -VISA 5.1.2

  KUSB - 488B with the associated drivers (adapter USB to GPIB of Keithley)

  Because I can speak with my instruments in visaic, I guess the installation of drivers for the Keithley interface is ok.

  Trace IO NOR I see beeing of commands passed through Labview to VISA so that they "see" between them.

  I found a thread where someone had the same problem and its solution was downgrade to Labview 8.5.1, which is not possible for me.

  http://forums.NI.com/T5/instrument-control-GPIB-serial/Keithley-2700-driver-problems/TD-p/1474212/PA...

  You have an idea to solve this problem?

  Kind regards

  Baptist

  Here's a follow-up on this issue.

  I tried with Labview 32-bit on main machine: it works.

  The pleasure is that I have to use Labview 64-bit.

  So the ultimate solution is now to run a client and a server of visa on the machine: Labview 32 bit can directly access my resources GPIB, Labview 64-bit must go through the closure of the network.

• Communication of lookout with CompactLogix 5370 series using OPC will not work

  I am trying to contact a series of 5370 CompactLogix 1769 - L18ER - BB1B PLC. I tried NI OPC servers V4.5 and NI OPC servers V5.5 2011 with no luck. I can create a new channel and device ok using CompactLogix 5300. I can automatically create the database of the tag and it will pull all the tags of the PLC ok. I use Lookout version 6.6. When I create a new driver using OPC Client it will show all the tags correctly.

  As soon as I drag a label on a Panel, Lookout alarms with:

  

  OR mutual FUND shows these errors:

  

  Any help would be greatly appreciated!

  I had updated the firmware in the CompactLogix at 24 Rev before you start.  Mutual FUND would work for about 25 seconds before stopping, but only after downloading a program in the PLC.  I got the firmware to the oldest I could 20.014 and now everything works as it should. OR mutual FUND is not yet compatible with rev 24?

• I want to connect tpg261 with labview series but Max NOR that I have always had no devices found, how can I get drivers of pfeiffer tpg261?

  I downloaded the drivers from the main site, but in this zip fired are all there. no configuration is given.

  Please help me fing this driver.

  Here I am submtting the zip file.

  The only thing that you detect Max is the com port that you have connected the device. Unzip it in the folder instr.lib

• HP 50 g - PC connection series with adapter Series USB and null modem troubleshooting

  I have the calculator correctly connected to my laptop via a USB series adapter, which is plugged into a null-modem adapter, which is plugged into the serial cable sold on HP Calc.org specifically for the HP 50 g. I started XModem on the calculator, but Conn4x found nothing. Is the process different from that used for USB and Conn4x connections? The problem could be with the USB Serial Driver. I use the default MicroSoft driver installed to connect? Are there tests I can run to determine if the adapter is broken, or the computer or calculator. Thank you very much in advance for your help!

  I already tried the following:

  • The two indicators relevant system are correct for the serial communication
  • Tried to reinstall the driver
  • Google for any relevant information that is extremely rare
  • Tried with two Xmodem Kermit servers running on the calculator, press 'Connect' on Conn4X.

  Hi!, Ranothil:

  If you have the following cable "null modem" (http://commerce.hpcalc.org/serialcable.php), you can transfer, all

  data, HP50G, to the PC and vice versa, throughout the connection Kit (Conn4x), without issue.

  Please, see this link, to education, to transfer data with the serial null modem and connectivity kit cable... http://sense.NET/~Egan/SKB/ or... http://www.hpmuseum.org/cgi-sys/CGIwrap/hpmuseum/archv017.cgi?read=125259

  Note: best if you transfer data, HP50G, PC and vice versa, through the microUSB.

• MAX with replication DAQ cards

  Hello

  Hope someone could shed some light on this

  Its a long time since I've used Labview & MAX and am a little rusty right now.

  I'm trying to upgrade an old data acquisition system to a newer version.

  This is because originally one full working backup system was necessary, but because the old DAQ cards are obsolete,

  a simple update was necessary.

  Old system:

  LabVIEW 7.1

  MAX 3.1.1

  Data acquisition card: PCI-6023E

  New system:

  LabVIEW 7.1

  MAX 5.0

  Data acquisition card: PCI-6220

  There is no change in the Labview application.

  In the new 5.0 MAX.

  I'm trying migrate/replicate all virtual channels & settings of the old system.

  I managed to set up a new configuration using file for the acquisition of data from the old system.

  This resulted in the creation of chains of virtual of NOR-DAQ traditional under the District of data, which is what I wanted.

  But the problem is, all the channels received a red cross.

  Clicking on properties of the individual chain shows that no device is selected in the hardware section. There is none to choose from.

  Under devices & Interfaces,.

  The new card is correctly installed and running.

  Appears as > NI PCI-6220 'Dev 1.

  How can I make this device available in virtue Traditional NOR-DAQ virtual channels in the data area?

  Is it because the new MAX/data acquisition card requires the method task NOR-DAQmx to create virtual ways?

  I want to migrate channels instead of recreating that there are a fair few and each with their own settings.

  In the old system.

  Under devices & Interfaces,.

  That's what it shows:

  -Devices of NOR-DAQ traditional
  PCI-6023E (1 device)

  -OR-DAQmx devices
  -PCI-6023E: "Dev 1.

  The device is recognized under the District of data - Trad VC through NOR-DAQmx devices.

  I can attach a screenshot for systems if it would help at all.

  Thanks in advance!

  -Ram of Aust

  Bad news...   Your most recent 6220 is a M-series it is * not * supported by NOR-traditional DAQ.  This is why it does not appear as an option under the traditional OR-DAQ driver.  To use the most recent data acq card, you * must * swtich above DAQmx.

  Your old 6023E Board should be accompanied by one or the other pilot (but never both at the same time), so it may be be jointly installed a print while you set on the (tedious) company to recreate channels for your new Board in DAQmx.

  -Kevin P