Compact computer DC5750S

Hi guys, a few days ago I came across this compact computer desk DC5750s.  He had a bad Sempron processor that I replaced with an AMD dual-core 4200 + and upped the memory to 2 GB.  The computer is now working OK.   My question is how to access the BIOS.   I press F10 and a menu will appear asking you to language to use.  Another menu will appear with the info on the system.  I can only change the date and time and save the settings by default or factory.   That's all.  It is not a BIOS where you can make changes to the system as we all know.   I downloaded the installation manual, but it did not help.  It says press F10 to access all the settings as schedules, SATA, command parameters start etc.  Am I missing something?  Thank you 1 million.

That's all!   It WAS the 19 "monitor.   I used a 20 "LCD wide screen and an old CRT type monitor and now I see the options on the screen of the BIOS settings.   Lesson learned here.  I don't have as large screen monitors, but looks like they have their place.

Tags: HP Desktops

Similar Questions

  • I'm working on a HP Compaq dc7600 compact computer with a BIOS password

    I'm working on a consumer HP CS 1900 post that contains computers HP Compaq dc7600 small form. On a computer, the battery holding the BIOS is released and the date and time must be reset in the BIOS. The configuration of the BIOS is password protected and I don't have any idea what is the password. I tried to go beyond it with a password BIOS HP chip resetter, but when I'm in the configuration it still doesn't let me change the date and time. Should I just reflash the BIOS? I bet that even after it is flashed there is going to be password protected. I left the battery for a few days and changed the rider of neighboing etc., but it is still protected. Is their a manual/doc/pdf that could respond to explain/identify the BIOS password?

    Hello:

    I don't know if it's me or the HP support site, but I can't seem to him.

    That's what you need to do to clear the BIOS password on a dc7600...

    1. turn off and unplug the PC. Unplug everything plugged to the computer. Keyboard, mouse, monitor, printer,... everything.

    2. press the power button to drain any residual power from the PC.

    3 open the case and locate the Green password on the motherboard jumper.  On the WTO, it is very close to the primary SATA HARD drive data connector.

    There is also a green light about, but of course that will be turned off for you.

    4. in any case, locate this jumper and remove it and place it somewhere for more security. Some people just put on one of the 2 pins. I prefer to remove it.

    5. now connect the cables. etc and start the PC. The password must now be provisioned.

    6. switch off the PC and replace the Green jumper on the two pins and everything back together.

    Fixed.

    Paul

  • Sound does not work in my Vista computer.

    Original title: Hello I need solving audio sound problems no need for pilots to soand but I bought this record registration of his friend's Audio microphone

    who had the same problem before selling it, he was using this compact computer Presario f700 with windows 8 pro iam woundering if I had just the befdore of windows or start them at the same time that windows vista would be reqinize drivers

    Hey Joe,

    As the sound does not work under Windows 8 and Windows vista, it may be a hardware problem.

    We will try the following solutions and check to see if the sound works.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

    Download and install the driver for your model of laptop vista.

    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=3548233&prodTypeId=321957


    Note: If you use the 32-bit operating system, download and install the 32-bit drivers.

    If you use the 64-bit operating system, download and install the 64-bit drivers.

    Also check out the following link:
    No sound in Windows

    http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1


    If the problem still persists contact support forum HP:

    http://h30434.www3.HP.com/PSG/

  • Message to update the serial number.

    I got my Compact computer for 5 years.

    About 2 weeks ago, the motherboard went on the computer... I sent it to be repaired. The person to fix my computer had a family emergency and had to leave the State.

    He took my hard drive and placed in an Emachine old there, so that I wouldn't totally computerless until his return.

    I've been using this computer for 2 weeks now with no problems, until tonight.

    I get a message that I need to put my serial number in my computer, or buy a new serial number.

    I don't have access to my computer... locked in a store waiting to be repaired.

    I didn't want to buy another number of series produced... also, it would be inconsistent to this Emachine.

    I don't know what to do at this point.

    I already have my new computer which is going to be a Christmas gift from my family. My intention was to fix the old one for my granddaughter.

    Any suggestions?

    I called support... but the woman I spoke does not understand my problem.

    The situation is called "Windows Activation".  The BIOS of the motherboard is encoded with one "tattoo/key" that identifies the material.  It is also encoded in the Windows operating system partition.  Click on "Control Panel", "System."   Look at the bottom.

    Example: My HP m8100e computer has become unstable (M268LA Narra3 motherboard). I put this drive in a HPSlimline s5120y (M268LA Narra5). It starts and runs, but I get a warning when I discovered 'activation' I have only 3 days to activate.  If I only use the Board in the m8100e, I have to explain the new motherboard to MIcrosoft to reactivate the operating system.

    Your dilemma is that an illicit and invalid operating system has been detected. You need you old Compaq returned and fixed.

  • Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

    Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

    You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

    When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

    There should be a copy of winlogon.exe here:

    c:\Windows\System32\dllcache

    Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

    You just need to replace the file winlogon.exe somehow.

    When you are finished replacing, restart as usual (remove the CD bootable of course).

    With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

    Do you have a Hiren BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

    Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

    There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • "to use Acer drive, please launch and sign in the Acer Revo One player". What/where is a Revo?

    All-in-one touchscreen, Acer with Windows 10 came with Acer drive icon on the desktop.  When I click on it, I get message 'to use Acer drive, please launch and sign in Acer Revo One player '.  Cannot find a Revo on my computer.  Web search indicates a Revo is a compact computer.  Cannot make any sense of this.

    The solution to solve this error is to uninstall Acer drive. You can find instructions to remove programs at http://acer.custhelp.com/app/answers/detail/a_id/39592/

  • Como puedo get the clave COA para realize downgrade from Windows 8 one of Windows 7 32 bit

    Buenas tardes:

    The empresa in the trabajo ha comprado una 86 computers HP EliteDesk 800 G1 SFF, las which amount han venido con license OEM Windows 8 64-bit y con Windows 7 32-bit media.

    El problema radIca in Los sistemas y applications than utilizamos solo con how Windows 7 32 bit, por eso as desde page of HP http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/download-and-install-Windows-7-...    y http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/ de el instalador proffessional SP1 - U ISO of Windows 7 32 bit in formato ISO, el cual, pude instalarlo con normal y correctamente.

    Aun asi, el producto no ha sido activated, y me indican tengo 30 dias para activar fired her will. I have understood what the clave COA me estan tried esta encriptada in el BIOS y is no is muestra formed vignette in el Chasis of the computadora,'re por esa razón Québec no is como puedo activar her license of Windows 7, I have understood that las licenses con buy las son tipo OEM computers y puedo realize downgrade from Windows 8 a Windows 7 con normal y sin problema , in this case pero me pide license there no to get como clave COA.

    May inidcarme los pasos para realize este procedure? Are urgent

    MUCHAS Gracias

    Claudia

    [Redacted for privacy]

    This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. No response from an employee of HP represents his own opinion and not that of HP.

    If computers were purchased with Microsoft's Downgrade rights, they would be shipped with Windows 7 Pro 64 bit installed in the factory and restore HP 8/8.1 Pro 64-bit Windows included media. You will need create the restoration of Windows 7 Pro 64 - bit from at least one of these computers support.

    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

    If computers ship with Windows 7 Pro 64-bit installed or if you have media to restore Windows 7 Pro 64-bit computers, you may be able to use the below to install Windows 7 Pro 32-bit.

    (1) download and unzip ABR Beta with Windows 7 Support. This is the homepage of ABR for Windows Vista. Please follow the section "How to use" for information and instructions on how to use it. These steps also apply to Windows 7. Perform the 'activation' on multiple computers backup and back up the certificate and the key has been recovered in separate places for comparison. (He draws the original key HP preinstalled OEM factory and certificate from your factory installed OS OEM) Compare the keys and certificates for each computer, they are all the same? Please report back with your findings.

    (2) download and use RWEverything to determine the version of the OA/SLP/SLIC in BIOS of the computer. See this page of Web MyDitigalLife titled "How to check or verify PC motherboard BIOS SLIC Version is SLP OA 2.0 or 2.1 for OEM Activation" for more information on how to use and decipher the information. (Windows 8 use OA 3.0 and this is where the problem can happen) Please report back with your findings.

    (3) If you do not already have a copy, download your version (the version that was preinstalled on your HP computer) Windows 7 from Official Windows 7 SP1 ISO from Digital River.

    (4) install Windows 7 Pro 32 bit, following all prompts as needed. Don't let not Windows try to scoped. Run ABR 'restoration of activation' to 'install' the previously saved until the product key and the certificate. Make sure that Windows is activated, repeat "restoration of activation" until Windows 7 is activated. (It "installs" pre-installed HP OEM factory original key and certificate from your factory installed OS to your new installation of Windows. This HP OEM key and the OEM HP certificate, as well as the BIOS is what allows your computer to HP be factory preactivated.)

    (5) install all drivers from the computer. These can be found on the support page HP for your computer or you can find the drivers on the sites of manufacturers of component various... Intel, NVidia, AMD/ATI, Ralink, Realtek, etc..

    (6) image of the Windows installation and deploy it to the remaining computers.

    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

    HP EliteDesk 800 compact computer G1 is a class computer business, your question may be better answered the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

    Esto NO es oficial HP attention al client y yo, como las otras personas in este foro most, no working para Este HP. are not supported-to-peer forum of usuario para productos consumo HP HP class. sin presencia in este foro oficial stays are likely poco that HP is going to an answering machine of manera oficial. Any respuesta UN empleado represents HP known opinion propia y none of the HP.

    If los equipos is compraron con Microsoft Downgrade rights, habrian sido quadrilha con Windows 7 Pro 64 bits wont fabrica desde y Windows 8 / 8.1 Pro 64-bit HP restore / medios recuperacion incluido. Usted will than crear el Pro 64-bit of Windows 7 restore / medios al menos uno estos equipos recuperacion.

    - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = -

    If con los equipos envían of Windows 7 Pro 64 bit wont o tiene Windows 7 Pro 64-bit restore if / medios recuperacion para los equipos, can be able to use the information of abajo para instalar Windows 7 Pro 32-bit.

    (1) Descargar y descomprimir ABR Beta Con Windows 7 support. Here is the main page of the ABR para Windows Vista. Por favor, siga the section "how to usa" para more information e instrucciones sober como each. ESTOS pasos is applied a Windows 7 also. Perform the "copia activacion security" en varios hence there save the clave recuperado y certificado en lugares para comparison separately. (Esto pushes has the original HP OEM certificado preinstalado fabrica of clave y su fabrica installed OS OEM) Comparar las claves y los certificados cada equipo, are all the same? favor informen con sus hallazgos.

    (2) Descargar y use of RWEverything para determining OA / SLP / SLIC en el BIOS del equipo version. Consult this web page MyDitigalLife entitled "Como o PC BIOS SLIC SLP OA Verifique see are version 2.0 o para 2.1 OEM Activation ' for more information sober como use there descifrar information. (Windows 8 OA 3.0 uso y aqui are where is can produce el problema) Por favor informar con sus hallazgos.

    (3) if usted no tiene una copia, download the version (the version that it was pre-wont in sus equipos HP) of Windows 7 desde Windows 7 SP1 ISO Oficial of Digital River.

    (4) to Instalar Windows 7 Pro 32 bit, following todas las instrucciones según sea necessary. No Permite Windows para tratar auto-activation. Run ABR "activacion restore" has the clave of producto y el anterior seguridad certificado "instalar. It check that Windows is activa, repeat "activacion restore" until Windows 7 is activated. (Este "instala" the original HP OEM preinstalada fabrica clave y el su fabrica installed operating system para del certificado knew Windows instalacion limpia.) Esta tecla HP OEM y el certificado OEM from HP, junto con the BIOS are what permite a su equipo ser pre-activated HP fabrica.)

    (5) instale todos los drivers finetoothed para el equipo. ESTOS themselves can find in page soporte para HP knew computadora o you can find los controllers in los web sites different from los manufacturing of components... Intel, Nvidia, AMD / ATI, Ralink, Realtek, etc.

    (6) the instalacion of Windows Imagen e more in remaining teams.

    - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = -

    Medida el EliteDesk 800 HP Small Form Factor equipo G1 are a team of business class, knew pregunta can responderse mejor in Comunidad de Negocios HP business. Also you can consider ponerse in contacto con el Centro de Soporte HP Business para ayuda con su problema request.

    If tiene alguna duda, por favor no no dude en long.

    Por favor, haga click en Blanco Bravo 'Thumbs Up' el para su agradecimiento show

  • CD ROM hangs during audio cd playback

    I installed a cd driver for a second on compact computer and put the cd in windows media player and almost times songs but freezes before playing

    Hello

    ·         This problem happens only during CD playback when inserted in the old CD drive?

    ·         This happens with a particular CD or the CD?

    I suggest you to check if the problem is with the CD drive, to check that insert the CD in another drive to CD and play in Windows Media Player and see if the problem still occurs.

    If the problem does not occur during playback of the CD in another drive then it is probably a problem with the CD player.

  • I am trying to download images from a compact flash player map, but every time my computer shows i/o device error. What does that mean?

    I am trying to download pictures from a card compact flash player map, but every time my computer shows i/o device error. What does that mean?

    Hi Richard,

    1. what version of Windows you are using on the computer?

    2. have you checked if the problem persists in a different USB port and in another computer?

    3 - is the card compact flash not detected in Device Manager?

    A Secure Digital or SD memory card is a device of small portable storage usually used on a digital camera or camcorder, cell phone, or computer system. When you use the card, you may sometimes experience an IO error. The term "i/o" is refers to an input/output error and may involve the SD itself card or the card reader you are using.

    Try these methods:

    Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

    Follow the link below a convenience store opened.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    Eject the SD card in the card reader and check the writing on the side protection tab. This tab should be in the up position; otherwise, you will not be able to save all data on the card. Also check the connection between the computer and the SD card reader. If the card reader is not properly connected to the computer, you will receive error messages when you try to use the SD card or your computer does not recognize the card.

    Response with more information to help you. Back to us for any problem related to Windows. We will be happy to help you.

  • Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

    Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.

    original title: compaction of the database messages

    Hi Kathy,

    Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.

    Mike

  • Windows Mail small box saying to compact (or something) my Windows Mail account? When I start my computer.

    Why, all of a sudden, every time I turn on my computer do a small box saying to compact (or something) my Windows Mail account?  I've NEVER used Windows Mail!  How can I stop this box from appearing when I turn on my computer? & Why it just started appearing in the last two weeks?
    Thank you

    Hello Blessed15221,

    Windows Mail is actually installed. If you have installed Windows Live essential, without disabling all applications, chances are that Windows Mail has been installed.

    Check out this link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/turning-off-windows-can-compact-your-emails/1cf6357b-8563-4ae5-ad0f-31baaaaaa9bf which may be able to solve your problem.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • ERROR. My home architect Deluxe 3.0 program 3D, compactables with windows 98, ran well on my service program 2 windows xp. I've upgraded to windows 7 recently and everytime I try to run the program I get the sign of the error, missing 3dll to your compute

    3D ARCHITECT HOUSE LUXURY 3.O compactables program with windows xp service pack 2, does not not on windows 7, he signed still missing 3dll on your computer, please help.

    It is a very old application.  Although Win7 worked well for many more apps for my part, some are just not compatible.  I suggest you visit the developers forum and see if anyone else has found a work a round or consider purchasing the latest version.

    MVP - Windows desktop experience

  • When I plan the registry defragmentation and compaction on my Asus computer, it starts and ignores all the hives

    When I plan the registry defragmentation and compaction on my Asus computer and restart it to all it will do is start the process as my computer starts and then it passes all of the hives. How can I fix it. I am using windows 7 Home premium 64-bit.

    Original title: compacting registry

    to activate the registry defragmentation and compaction: go to start then run, type msconfig and click on the Startup tab.

    Choose Safeboot (mininimal), and then restart the computer.

    The computer will restart in safe mode, just let it run through the process; If you have a regular dskchk, let this race as usual and let the computer restart, the reg defragmentation etc, should operate normally after that. Remember once the computer has restarted in safe mode and you're on the office just repeat the msconfig but uncheck the boot in the safe mode option, and then restart Windows normally.

  • How can I increase the RAM (memory) for my computer to hp dc5750?

    I bought one of these pc hp dc5750 form small factor that invade now right-handed ebay.  It came with only 1gig memory 80gig hardrive and processor bicoeur AMD Athlon 64 x 2 2.0GH but I can not know the socket type I think it's an am2?  I'll update my AMD Athlon II X 2 215 2700 MHz proc @ in my hp p6203w, but it is an am3 I think and I was wondering if the motherboard will accept an am3 as my another hp witch will take either.   I had also (lots of memory Samsung - 2GB (2x1GB) PC2 - 5300U - 555 RAM NON - ECC Unbuffered 240-pin) off ebay thinking they were a matched set, but when I got them one had a 1R - 8 x and the other had a part number x 8 - 2R

    I was woundering if I ran these two stick and the two 512 original supplied with the pc that are 1R - x 8 a face cards will be it atcually be able to use all 3 concerts cuase I saw a diagram that shows the configuration of two 1gigs and 2 512 in slot 2 and 3.   but he said someithing on all correspondence.  Once I put them all in the computer it says there 3gigs but I don't know if it of using everything or if Im better off just runing the two 1gig sticks or both will have to be 1R - x 8 or 2R - x 8 (it is the motherboard that has all the right to side by side 4 memory slots and not in separated couples and the other model nuber 8305-65U)

    Oh yeh Im runing win7 64 bit

    Type of socket original title: hp dc5750 and memory?

    + 1 on the suggestion of Nirmal - contact HP support, but--

    All very hit and Miss. Miss Aries matching is not a good idea and miss-corresponding to the quantity (2x512MB - 2 x 1 GB) often fails. You can get lucky and the machine will start, but the RAM performance will suffer without worrying.
    There only seems to be a lot of people who are able to run the 3 GB of RAM (laptops for most), but it's a strange configuration.
    Better to have two sticks of 2 GB and (assuming that Win7 32-bit) only have access to about 3.25 GB of that you still get the benefit of the dual channel performance.
    I have an old (built in ' 05) PC with an AMD 939 socket cpu and experimented with two 512 MB and two sticks of 1 GB (I have 2x512MB sticks all the time), the computer does not start in windows with this configuration.

    AMD made a number of processors with the Athlon 64 x 2 designation. Several are socket 939, others may be AM2. He must know exactly what processor and the motherboard to know what are the components.
    If the RAM is DDR2, there is a chance of the cpu/motherboard are AM2.

    The upgrade to a HP or other OEM PC can be a minefield that they often use a design of the 'special' motherboard (if you use the HP chipset drivers this is probably one of their 'special'), and with 1 GB of RAM and only a 80 GB HDD in a matter of form factor small with a cheap food you get what you pay for.
    Personally - you better made to buy the parts from someone like new egg (if you are in the USA) and assembled the unit yourself. Basically, you try to make a silk on a scholarship...)

    EDIT: Just found this -.
    http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+business+desktops/dc5750+series+%28All+form+factors%29-upgrades.html

  • Have the serial number for a desktop computer compact presario 6000 series. Need to model number.

    Have the serial number for a desktop computer compact presario 6000 series.  You will find exactly what model number, it is.  Tags are not on the computer windows only certificate.

    Compaq 6025RSH Spec

    Drivers HP to Win X for the 6025RS

    Could navigate drivers Web sites and getting to the actual hardware device manufacturer there. It would be of OEM as Nvidia, ADI (analog), etc.

    Fran

Maybe you are looking for