Compaq 100 desktop PC: devices do not respond to startup

Similar Questions

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Lightroom 6 (not responding) at startup.

  I'm running Lightroom 6 stand-alone version, and recently, to put on the road, I get an error "not responding". After a few minutes resolves the problem, but it is a problem that is boring without worrying. No change in system didn't have been implemented recently. The graphics driver is updated. Unchecking the option in the preferences of graphics processor isn't the problem. Any ideas on the cause or a solution?

  Thanks in advance.

  Hello

  Pleased to announce that reinstalling solved the problem. In fact, Lightroom works better than before. Thank you for your help. Don't know why I did not re - install everything first.

• 15 - s006tu of Compaq Notebook pc: PCI Device driver not found

  In my laptop newly bought 'HP COMPAQ laptop 15-S006TU', I installed Windows 7 ultimate OS. PCI Device driver and driver Bluetooth are not found. They are in yellow color in the network adapters. I tried many things to update drivers for my pc and online but no use. It shows driver not found for your device. How do I solve this problem

  Hello:

  This bluetooth driver should work...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

  Card reader (PCI Device):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140783-1&cc=us&DLC=en&LC=en&OS=4063&product=7308927&sw_lang=

• Compaq: Compaq HP Desktop Clock works do not.

  I have a problem with my Compaq clock not changing at the moment. As soon as that changed manually, it is the game of the previous hour. I understand that this can be battery on the motherboard and I was wondering if there was no video showing how D I Y, or help on the place where on the map it is located and what it looks like.   Or is there any other problem, maybe it's that it doesn't always for the last time until the PC goes into sleep mode.  Thank you very much.

  Thanks a lot, seen the video and replaced the battery without problem. Also had no problem reboot, changed time when prompted and the work done.

  Thanks again

  Keith Martin

• Safely remove the device does not respond

  I've recently updated my laptop operating system to Windows 7. When I upgraded first, it worked normally. But recently I realized that when I click the icon remove the device safely to remove my thumbdrive, it does not for me already. I tried to right click, but nothing happens.

  Please help me! Thanks and appreciate your help!

  Have you checked in the Device Manager for the yellow or red flags on the USB controllers? If found, remove items and restart.

• Qosmio G20: CPU get up to 100% and the program does not respond

  My computer is very often og to 100% of the CPU... And that's without any havy program... I also just formatert and reinnstall computer
  The result is often that the computer is frizing/program isn't slow answer/work... And I need to restart... I really hope there is a solution to this problem... I like my Qosmio G20.

  Intel. 2.13 GHz
  798 MHz
  1 GB OF RAM

  I have the Bios 1.30

  Hello

  I recommend you to check the task manager during the ruin of CPU to 100%.
  Here, you can see the processes tab.
  You can try to find out what process needs the full CPU performance.
  Sometimes similar issues are caused by several applications of spyware and viruses. You should check this possibility.

• Receive the message "card Flash not responding" on startup

  Original title: Problem with this: "FFDshow codec" on toshiba satellite laptop__also, a message "flash card not repsonding ' still on start up.   

  Toshiba satellite laptop computer has the following problems:

  one, "Flash card not respnding" always on startup and the program fix indicates the following problem which they cannot fix: FFDshow codec

  Any help would be appreciated.   Windows Vista operating system

  Hello

  You need to maybe go to support Toshiba and redownload and install the utility. Search the PVAT
  The Toshiba Value Added Package. Also check with Toshiba support and their forums.

  Toshiba left superior support and access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ============================

  Re-install the Codec FDShow
  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Compaq 100-000eo: power on password

  Hello

  When I try and start this computer, what happens with this

  Enter power on password:

  pls help

  Hello

  See if you can clear this by using the motherboard jumpers - see the subtopic "Horsemen" on the following link.

  http://support.HP.com/us-en/product/Compaq-100-desktop-PC-series/5359004/model/5394226/document/c03727139/

  Kind regards

  DP - K

• Windows XP will not respond to the keyboard or the mouse. Why it is not working.

  Well, I have the version of Windows XP Home Edition-32, Service Pack 2. I bought a keyboard gear yesterday with a mouse optical usb Dynex. My old keyboard and mouse were completely irreparable; I threw the. I plugged my new usb devices. When Windows has finished loading need me for my logon screen. However, my mouse and keyboard will not respond. This prevents me from going further. In addition, they will not respond during startup, the BIOS or the Windows Advanced Options Menu. I don't have a recovery disk. I bought the computer with XP already on this subject, so I do not have the disk to the operating system. What is my next step?

  I bought PS/2 devices, and they work perfectly. Thanks for the tip.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• The desktop icons do not respond after the use of IE

  Hello

  Anyone got a solution for this? When the computer is turned on I can use the icons on the desktop, no problem. However, after I used Internet Explorer from the desktop icons don't respond well the pograms can be opened from the start menu. As the recent problem I tried uninstalling some updates recently installed, without solving the problem. Using Windows Vista and IE9

  After that I used Internet Explorer from the desktop icons do not respond

  Does that mean exactly?   For example, what do you see?   For the best answer to this question, you could use ProcMon and know what modules are involved when you do what these are.   ;  )

  However, without using ProcMon you can check with the Manager task or resource or ProcExp monitor if there is always a hidden background iexplore.exe processes running or anything related to IE which started as a result of your using IE.   If so then try to kill these processes.   Etc.

  Related to this, you could also consider what you used IE before your symptoms occurred.   This means that would understand that make your "desktop icons" and change it to something more neutral.   For example, if you had clicked on was a shortcut Internet (aka the .url file) that requires a network connection, change for people who only runs locally, such as about: blank.   So if you could close the window that has opened and always use the shortcut you would have refined your description of symptom to involve the network connections.

  Related to that, would be your security package, for example, some are trying to act as a hidden proxy to "analyze" the HTTP traffic.   Then the problem would not be IE but the hidden proxy.  Etc.

  You can't wait for a "fix" until you have a fully understood symptom.   More details and diagnosis is necessary IMO.

  ---