Compaq 8200 Elite AiO: update of HP Compaq

Similar Questions

• PC HP Compaq 8200 Elite MT: Should I roll back before flashing the BIOS?

  Hello, I am trying to determine if the update of the BIOS shown on your website is right for my machine: HP Compaq 8200 Elite MT PC. After selecting 'Let HP find my products,' he identified my machine and sent me to a page that asked me to 'Select language driver and OS' two squares. I selected my language, then going on to the next box that asked me to choose my operating system. However, it does include all the Windows 10 selections. I used to have initially Windows 7 Professional. However, I've recently upgraded to Windows Professional 10. Is it safe select the operating system Windows 7 Professional, even if I is no longer on the machine? You see, I want to update BIOS, because I'm having trouble starting after I install memory upgrades, and the provider of the RAM is recommended to upgrade to the latest version of BIOS upgrade before installing the upgrade of RAM, to eliminate these problems. I don't want to make a mistake, and then select the wrong BIOS update. There is an update of the BIOS on HP.com for my MoBo machine, but only for Windows 7 Pro. So should I go back to 7 Pro, before the update?  Please, inform me as to what I should do.

  Hello:

  I just got the flash drive, I use to update BIOS on my HP business desktop PC.

  I plugged in my dc7800 CMT W10 also running.

  The window on the flash drive, and I closed it.

  Then I went on the desktop, click on this PC, click with the right button on the flash drive, which is drive E:\ in my case.

  Then I chose the Format from the menu, and a box will open.

  In the file system drop-down list that I get on my USB flash drive, I get the following options:

  FAT (by default) which is what you want to use.

  NTFS

  FAT32

  exFAT

  So if you don't see these options, try another flash drive.

• HP compaq 8200 elite SFF graphic settings

  I have HP compaq 8200 elite SFF and only intel dedicated hd graphics 2000 which says that I have only 32 MB of ram, how do I increase it? I tried to get into the BIOS but I can't change it whatever it is, not even overclock my processor, is there a solution?
  
  P.S. I tried the bios update from 2.06 to 2.60 and I don't see any changes.

  Hello

  You can get assistance on the HP Enterprise Business Forum.

• HP Compaq 8200 Elite Ultra Ethernet slim problem

  Hello.

  I have a HP Compaq 8200 Elite Ultra Slim PC running windows 7 Home Premium 64-bit. I did a fresh install of windows with all the drivers and software, everything works very well next to network adapter, when I start my computer, I see a red x on the icon in the taskbar Ethernet, so I have to go to Device Manager and disable, enable Ethernet controller to make it work, and after doing activate deactivate it works fine but if I restart the system and then the same question It does not load/ethernet adapter network at startup. I'm stuck for the last 4 days, installed reinstalled windows 8 x 86, 64-bit, win 7 x 86, 64-bit. Update bios to J01 V2.25.  all the drivers are updated to the HP website, please. The system is in warranty, but I lost all documents related to the warranty etc. Any help is very appreciated,

  Thank you

  Hello:

  It is a forum of consumer to consumer.  I do not work for or represent HP.

  If the PC is under warranty, you should contact HP technical support to the country that you live on the link below and drop support under the warranty.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• PC HP Compaq 8200 Elite MT: KERNEL_SECURITY_CHECK_FAILURE: a rider needs to install the Device Manager

  PC HP Compaq 8200 Elite MT

  Product #: XY139EA #AB7

  KERNEL_SECURITY_CHECK_FAILURE I got 7 times that screen and necessary stop PC lose my job...

  in detail, I got: / / restarts not necessary reboot manually - it's 7 times different, what to do... I clean some viruses and update PC 1st and 2nd hour, but's still 3 times.

  The PC has encountered a problem and needs to restart.
  We are only collecting some information in error, then we ' he's restarted for you. ( ! 00 %).
  KERNEL_SECURITY_CHECK_FAILURE

  In the device manager driver must also install... what to do? what the cause of the problem...?

  A default OS Win 7 Pro 64-bit--> improved new facility at--> Win 8.1 Pro 64-bit

  

  Hello:

  I can't help you with the error, but here is the link for the driver for PCI serial port, you must...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037951&swItemId=vc_138955_1&swEnvOid=4059

  I have also a 8200 Elite CMT and it works W8.1 Pro x 64 and even the new W10 preview with no problems whatsoever.

• HP Compaq 8200 Elite SFF: MSI 770 2 GB graphics Nvidia GTX compatible with HP Compaq 8200 Elite SFF?

  Hello

  I recently bought a HP Compaq 8200 Elite SFF and want to update the graphics card. My friend has a MSI Nvidia GTX 770 2 GB graphics card in sales and I was wondering if it would be compatible with my PC. I said I'll need to upgrade to the power. Will it be possible? If the graphics card of my friend is not compatible with my PC, what is the best graphics card (ideally a similar to the MSI Nvidia GTX 770 specs/price range) which will be compatible?

  Any advice would be much appreciated.

  Thank you

  John, welcome to the forum.

  I think that you will get more answers to your questions if you start a thread here.  The members who know your best computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• PC HP Compaq 8200 Elite CMT: Replacement of the SSD HARD drive and Recovery Options

  I have a PC HP Compaq 8200 Elite CMT I went recently to drive HARD original for one SSD of 850 Evo from Samsung using Samsungs cloning/copying software. Everything went well and the PC is in use today. I do not see the partition D: Recovery on this machine more well, so I think this has not copied or was lost. I still have the disk that was replaced.

  I was wondering if there is a way to replace HARD drive like this with an SSD and everything by keeping the system recovery feature that was on the HARD disk, and if a set of system recovery disks of before installing SSD would continue to operate, or if I need to create new ones, and if I CAN create new ones.

  rgoodrich

  I did what you want to do (for example, to replace a disk with a DDI) and was able to retain the function of HP recovery - but it's because of two important facts.

  First of all, I used a DDI with the same capacity as the original HARD disk.  This is important because if you use a smaller SDS, the HP recovery feature will no more work as a reset begins with reformatting the drive and recreate the original scores - which will fail if the disc is too small.

  Second, I use Macrium Reflect product to 'clone' the HDD to the DDI, which means, he made an exact copy of the partitions on disk on the SDS.  So, when I swapped drives, the PC restarted without any problem.

  People have posted here on the use of the software from Samsung, and they seem to have problems restarting after use and (apparently) with successful copy from disk HARD original in the new SDS.

• HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

  Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

  From what I see, the motherboard has a PCIe and two PCI card slots.

  Computer model is XL510AV

  Any help is appreciated.

  Hello

  The following can help:

  http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

  It has 2 brackets for standard and one for the low profile, you can swap around.

  Kind regards.

• HP Compaq Elite 8200 SFF: flickering of screen hp compaq 8200 Elite freeze in windows 10

  HP Compaq 8200 Elite SFF correctly upgraded to 10 professional 64-bit windows, after a week, the monitor flashed for 1-2 seconds, then feezes PC, I have to reboot the PC to get the pc has started, it happens a few times, when pc rebooted PC and os works well? is this sign of incompatibility hardware or software or settings with HP graphics card? This happens not when the pc is Windows 7 Profesional, any help appreciated.

  Personally, I would keep this option unchecked to mitigate with computer after the flicker of the screen reproduce more. I understand that these services are redundant and unnecessary as a result of an upgrade to windows 10 from a previous version of Windows (ie. 7/8/8.1). I hope this helps.

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• Virtualization in HP COMPAQ 8200 ELITE MINITOUR

  Hello

  I got new machine: HP COMPAQ 8200 ELITE MINITOUR, [email protected] INTEL CORE I7, windows 7 64 BIT

  I need to enable virtualization in the BIOS, but I'm unable to find it.

  Please help me on this.

  Thank you

  Hello:

  You can find the setting in the Security menu.

  Please see the section of the installation guide for the maintenance manual on the link below for the precise location of the setting in the Security menu. (Chapter 2, page 13).

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c02741900/c02741900.PDF

  I have an Elite CMT 8200 and enabled VT

  Do not be alarmed if you change the setting when the PC automatically stops and 'playing possum' for a few seconds before it starts up again.

  Paul

• HP Compaq 8200 Elite SFF: Helps the confusion of RAM

  Product number: XZ987UT

  The motherboard has 4 RAM slots. Scan system critical Kingston say I can have up to 32 GB of ram, and I've seen screenshots of people who have this system and are indeed using 32 GB of ram.

  However when I install 32 GB of ram, the system will not even after. Nothing at all. With 16 GB, it works very well, and the doc on the HP site for this system say that it can take up to 16 GB of ram.

  Why the site HP says 16 GB and everything else say 32 GB, and there are people who HAVE 32 GB work?

  Crucial support said I might have to activate an XMP profile in the bios, but there is no option for this at all.

  Can someone clear this up once and for all?

  Hello:

  I'm one of those people who runs happily on 32 GB memory PC3-10600 in my HP 8200 Elite CMT.

  Make sure you get low density memory.

  I have something in the BIOS.

  I have since updated to revision latest, but had no impact on working memory.

  He worked from the original version of BIOS installed.

  It's the memory that I used in my PC...

  http://www.Newegg.com/product/product.aspx?item=N82E16820233269

  I can't imagine that the SFF specs would be different from that of the CMT specifications in memory is.

• HP Elite 8200 CMT: Bios Update after the update of Windows 10

  Hello, I've updated my HP Elite 8200 CMT from windows 7 to windows 10.

  In the HP driver download page, there is no updated BIOS for windows 10.

  But I noticed that it is has updated BIOS for Windows 7.

  The question is, can I use it on Windows 10?

  And generally to load OS updates to the BIOS?

  Hello:

  You can remove the base flash BACK of the package of BIOS file folder, simply copy the contents of the file flash BACK on a USB stick formatted with the FAT file system.

  Plug in a USB flash drive, restart the PC, press the ESC key to get the options menu.

  Select F10 system configuration to access the BIOS.

  Select the file menu > control system ROM Flash.  Select the USB flash drive.

  The PC will see the files on the flash drive.  Follow the instructions to update the BIOS screen.

  In this way, it makes no difference what operating system you are running.

  A very important point... I read the last 2.29 installing BIOS causes problems with the W10.

  There is a post on the forum about who...

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Compaq-8200-elite-SFF-slow-reboot-time-in-legacy-BIOS/m-p/5654549#M12815

  I use v2.28 on my HP 8200 Elite CMT and have no problem at all on W10.

  I have read that post and decided to not update the BIOS to v2.29.

• Division by zero weird problem on HP 8200 Elite SFF

  Greetings,

  I posted my message here, it appears now that my problem is hardware specific.  My machine has the following specifications:
  
  HP Compaq 8200 Elite SFF
  Intel Core i5-2500 Duo @3.3 GHz processor
  8 GB memory

  Windows 7 x 64

  (I can provide more details if necessary)

  This has been me puzzled for more than a week now!

  We have an application where we lack in a division by zero. That request is deliberately built to raise exceptions in this case, with a call to the function _controlfp_s for edit masks on floating point exceptions.

  Now, when you run in a division by zero pretty much all of our machines, Visual Studio 2005 debugger breaks in the right place in our source files. However, on this machine, the location of the break is in every sense and seems to be unrelated to the real cause of the failure. So as a test, I built a simple win32 C program with just the following lines of code:

  int main (int argc, char * argv [])
  {
      float temp1, temp2, temp3;
      unsigned int control;
  
      _controlfp_s (& control, _EM_UNDERFLOW + _EM_INEXACT, _MCW_EM);
  
      Temp1 = 1.0;
      Temp2 = 0.0;
      Temp3 = temp1/temp2;
  
      return 0;
  }

  On all these 'good' machines, the code breaks when the temp3.  Among the other machines tested successfully, I had various hardware and operating systems, including Server 2008 R2, Windows XP x 32 and Windows 7 Pro x 64.  However, on this machine, the code stops at:

  C:\Program Files (x 86) \Microsoft Visual Studio 8\VC\crt\src\tidtable.c

  function:

  __set_flsgetvalue()

  In reviewing the records I have change the assembler code, everything seems fine until I hit the "ptsps" statement... then all records seem to be messed up (vs research as expected on a good machine). When comparing the stack on the good vs. bad, I also see entries of pile on the wrong machine, I don't see a good...

  Now... Here's what I did to solve problems:
  1. a disc image of the original disc HP on a hot spare and the original picture restored.
  2. only installed Visual Studio 2005 Pro - portion of C++.
  3 - tested above, code has always failed.

  4 - update all service packs Windows and tested above code.  Failed.

  5 - update all service packs, the Studio 2005 and tested above code. Failed.

  6 uninstalling all the bloatware and tested above code. Failed.

  7 - updating the BIOS and firmware and tested above code. Failed.

  8. install Visual Studio 2010 and tested above code. Failed.

  Then... I decided to take my spare disk image and install it on a similar, but a little older HP computer that we have, which has the following specifications:

  HP Compaq 8000 Elite SFF
  Intel Core Duo E8400 #3 GHz
  4 GB memory

  I went through the process of installation very well, even though she used the typewriter 8200 recovery partition.  On this machine, I simply installed the operating system and Visual Studio 2005 Pro - portion of C++.  No service packs not whatsoever (even if the Studio 2005 requires an update for 'vista') and the code worked as expected!

  So, that leaves me about almost everything but the material!  Also note that I tried to disable several processors and all optimization of the BIOS on the 8200, without success.
  
  I don't see anything else I can try... Please help!

  Wow!

  After the posting of this message to a friend... He found a document showing very similar symptoms on some of their CPUs from intel... I then found the exact document who applied to our specific processor (intel i5-2500) here:

  http://www.Intel.com/content/dam/www/public/us/en/documents/specification-updates/2nd-Gen-core-desktop-specification-update.PDF
  
  See Erratum BJ1

  This article describes pretty much exactly what I run into!  (Seriously), I never thought this would be a problem at THIS level!

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.