Compaq 8510w: replacement HARD drive models?

Similar Questions

• NB100 - replacing hard drive

  How to replace hard drive Toshiba NB100

  Can someone help me?

  TY

  Sergio

  Post edited by: faggiano

  It is not so easy to change the HARD drive on this model.
  You have to remove many parts like keyboard, screen, cover and screw a lot.
  It's a little tricky, so you should have experience with this.

  As Akuma, go to a local ASP (authorized service provider) has said. They can help you replace the HARD drive.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• Dv6-7202se replacement HARD drive

  Hi, I want to buy a replacement for my DV6-7202se HARD drive. originally, I have a 1 TB running at 5400 RPM SATA HARD drive. I am running Windows 8.1.

  My laptop is now out of its original 1 year warranty.

  (1) is it possible for me to go to a larger, faster HARD drive?

  (2) my laptop was purchased in the UNITED Arab Emirates. Where can I find the replacement HARD drive here?

  (3) my current HARD drive has a number of specific product? The official site of HP can't give me that and continues to throw messages 'no information found.

  (4) where will I get the recovery disks to reinstall the operating system on it? He came originally with Windows 8, I upgraded to 8.1.

  Thank you!

  You can certainly get a faster drive, but I think that the biggest readers available now 1.5 TB laptop and they all work at 5400 RPM. Here is your Service Manual:

  Manual

  One option you have is to install an accelerator reader WSSD/mSATA cache to speed up the slower drive. The problem on your model, it is very difficult to get to the slot of the WSSD. It is not in the Bay of accessible customer service.

  To speed up the system even more, you can install an SSD expand instead of the ordinary reader, but the largest SSD drive is a 1 to.

  Where you can get all this material in the UAE, I have no idea. I guess you can get things shipped from Europe, Asia and the United States

  In regards to the operating system, unless it does not turn right you can clone (copy bit for little) the old drive and transfer the image to the new, or we can get you a link to download an image of disk for Windows 8, which can be installed on any hard drive. The License Code is embedded in the BIOS of your motherboard, so you just need to install it and Windows will activate automatically.

  Post back if one of these options looks interesting and we can assist in its application.

• HP Pavilion 17: mouse pad does not work after replacing hard drive

  Hello

  After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

  I installed the Synaptics driver but it didn't help.

  How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

  USB mouse works fine.

  See you soon

  The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

• This hard drive is compatible with my laptop? Apple 80 GB HDD 3.5 SATA for my Compaq CQ62, the hard drive that I have for that one is a "WD 500 GB 2.5 SATA II.

  I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.

  Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?
  If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!

  Why you want to replace a 500 GB with a 80 GB drive it?

  Macintosh is not an operating system

  A 80 GB drive is too small for a win7 PC

• dv6700 broken HDD "#10009 replace hard drive".

  Hi, my laptop model dv6700 and hard drive: 250 GB SATA. I made the recovery disc. Problem: disk hard abandoned recently and in the BIOS HARD drive health check, he showed '#10009 replace hard drive' query: 1) as I need to replace the hard drive, I want to upgrade to 500 GB. Is it possible or not? (2) if so, are there restrictions on the size, the brand of HARD drive? 3) once I have replace my HARD drive how to get my old OS (I have vista Home premium with the laptop)? (4) there will be a problem if I use my recovery on the new 500 GB HARD drive discs? (5) there will be a conflict in recognizing the new 500 GB HARD drive? Is there another way to solve this problem without replacement? Thanks in advance!

  Here are the answers to your question.

  (1) you can switch to 500 GB and its possbile no problem

  (2) no constraint on the size or brand. You can use any brand or manufacturer of your choice

  (3) you need to install your operating system using recovery discs. There is a guide available on here

  (4) there will be no problems if you use recovery discs on the new HARD drive

  (5) there will be no conflict. If you face any issues, you can always post your request on the forums.

  (6) Unfortunately there is no other way. If the test HARD disk fails, it means that his party. Only option is to replace the HARD drive.

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• A100 replacement hard drive

  I saw the other posts on this but no definitive answer.
  My HARD drive is dying and needs to be replaced. I see the posotion from the LHS is under the Palm drive and there seems to be one removable flap - other posts say there is only one screw to remove, but there is no visible screws under the machine.

  I've changed hard disks on other Toshibas with absolutetly no problem - someone at - it ideas?

  Hello

  Replace HARD drive on this laptop is not simply the procedure. I'm not 100% sure, but the entire Palm rest/Touchpad should be removed first. HARD drive cover is fixed with a screw, but you'll see him only if the Palm is deleted.

  When this screw is removed, hold the HARD drive tab and pull the HARD drive bracket. Next step is to detach the HARD drive from the HARD drive support.
  The device is quite new and first of all, check if the warranty is still valid.

• Satellite L300D-10 q recovery DVD Can be used on the replacement hard drive?

  Hello

  I was wondering if the DVD Recovery allows to install Vista on a replacement hard drive? The original hard drive is too small at 160 GB contain all the files that I use the virtual operating system image. The disk hard 500 GB of replacement must be large enough for that.

  The reason why I need to Vista, it's that the 32-bit and 64-bit versions of Ubuntu 8.04.1 and 8.10, cause the fan to run at full speed all the time which is very annoying. So for the moment I can only use Linux in a virtual machine.

  I intend to stay with Toshiba, though, as my two latest portable Toshiba Satellite a PII and a PIII still work today, and both have had Linux on them.

  Now, back to my story, I intend to remove the existing laptop, hard drive use DVD recovery to install to external USB 500 GB disk, replace the existing hard drive in starting up the laptop from the USB and copy my data overall. Before you reformat the old drive as external storage, I will replace in the laptop with 500 GB drive and the test so I can boot from the new drive.

  Key question will be the change of equipment, i.e. the new hard disk of 500 GB prevent Vista to install or activate?

  Thank you very much

  Vista itself can handle huge HARD drive sizes, but the question is: the recovery disc will be happy with 500 GB? The laptop will recognize 500 GB?

  I think it will work very well, because the new laptops are released with 320 HARD drive. 500 GB is not far.

  Its a few trial and error unless anyone here has tested a disc 500 GB HARD themselves.

• HP ENVY 14 2020NR: need a recommendation for a replacement hard drive

  Greetings,

  I have an a HP ENVY 14 2020NR with a hard drive died. Blue several screens before the new year, did a complete system restore, which seemed to have fixed things. Unfortunately, after 10 days the blue screens are back. The unit is several years old, and my next step is to replace the hard drive. I have all the data backed up elsewhere and ready DVD restore disc.

  Here are the specs of the drive:

  Hitachi disc HARD 7 K 750-750. P/N H2T7501672S.

  I am trying to identify the right replacement hard drive. Looks like it was 750 GB at 7200 RPM. Some choice out there. Can anyone recommend the correct replacement hard drive?

  Thanks in advance!

  DaniBoy

  Based on the laptop HP ENVY 14 - Maintenance Service Guide, it seems that your computer supports the following readers and more.

  6.35 cm (2.5 in) hard drives (HD) and the SSDS (SSD), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in)
  Customer-accessible
  Serial ATA
  Supports the following hard disk configurations:
  ● 750 GB (7200 RPM)
  ● 640 GB (7200 RPM)
  ● 500 GB (7200 RPM)
  ● 320 GB (7200 RPM)

  Supports the following simple SSD drive configurations:
  ● 128 GB mSATA,
  ● 80 GB, mSATA
  ● 160 GB, SATA

  According to the above information, any hard disk 2.5 "SATA or SSD of 9.5 mm and 7.0 mm profile should work fine. This includes the newer readers who are more capacious.

  Please see Newegg - internal laptop hard drivesfor a few recommendations of HDD and Newegg - internal SSD for a certain number of decent SSD.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Replacement hard drive for Portege P2010 - part number required

  Can someone tell me what is the part number for a replacement hard drive for Portege P2010 is? It has the latest version of the BIOS installed, if the capacity of the HARD disk can be greater than the original 30gig?

  Thank you

  Martin

  Hello Martin

  Unfortunately I was found no specific information. If I'm right, this unit needs 1.9 HDD and I think it can be much more expensive as 2.5 standard.

  Check it please this page http://www.laptopbits.co.uk/Database_files/Toshiba_Portege_2000_and_2010_series_spares.htm
  You will find a few pieces of upgrade for your device.

  Good bye

• Satellite C870 - 1 K 1 and replacing hard drive

  Hello

  I would like to replace the hard drive of wonderful this notebook with a hard disk of 500 GB 750.
  How should I proceed with the Windows installed on the original hard drive, the migration to the new.
  I do not have a CD ROM of Windows 8, was not included when I bought the laptop

  Thanks for your help and suggestions...
  Greetings

  Lambert (Belgium)

  If you use your laptop with an original operating system preinstalled, you can create recovery media using pre-installed recovery media creator tool. After replacing HARD drive, you can use this media and reinstall the original recovery image.

  After that your laptop will again have to factory settings.

• 20-d113w want to: replacement hard drive

  Hi, I looked around the Board for instructions on replacing hard drive. I intend to replace the original sata drive 1 TB with a seagate 1 TB sata3 drive. I know this is probably a stupid question, but just installing the new drive and run the recovery software, or something must be done again disc before I run the software. Thanks for any help you can give

  If you reinstall from the recovery discs set, it will not make a difference.  If you use a cloning software, it may depend on the package.  If you need to reinstall using a Windows disk, it should be able to themselves deploy by asking the user questions.