Compaq cq58 Abraptly extinction after 20 to 30 minutes of operation

Similar Questions

• Compaq CQ58: No sound after upgrade Windows 10

  No sound after updating Windows 10.

  Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.

  Tried several times scanning but "HP has encountered an error when trying to analyze your product."

  Although this suggests that the failure of the scan, produce a result: Driver (1)

  Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".

  But I already tried Windows Technical Support, who drew a blank and referred me to HP!

  Hello:

  I recommend that you try the audio driver IDT W8.1 support page for your laptop.

  This works in most cases.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp58406.exe

  If the W8.1 driver does not have the noise at work, try this...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. click on the Audio CODEC of IDT high definition in Device Manager.

  2. click on the driver tab.

  3. click on Update Driver...

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7 Windows has updated your driver software.

  8 restart the PC

  Key is step 6

• Compaq CQ58: Windows authentication after the restoration?

  Hello

  The hard drive in my laptop girlfriends died. I can't do general recovery, but I can buy one here at HP.

  Hard drive is easy to change.

  Question is, do I need the windows authentication code during installation? We have no more of this code.

  Peter

  Hi Peter,.

  You are welcome

  Unlike previous editions of Windows, where there was a visible label with the product key, any machine shipped with Windows 8 or 8.1 is the activation key into a physical (uefi bios) chip on the system board.

  Once you have installed the new hard drive, windows 8 recovery media will read this key during the installation and will activate automatically - you will not be prompted to enter a product key.

  Kind regards

  DP - K

• COMPAQ CQ58-300SA: I forgot the password admin or bios for compaq CQ58

  I forgot the administrator password for my setup.my of the bios pc model is compaq cq58-300sa laptop, after I hit a wrong password three times gave me this code 55260654.please help get the password for adiin for my pc.thanks

  Hello

  Please use

  40148290

  Concerning

• Compaq CQ58-230SF: I forgot the password admin or bios for compaq CQ58

  I have a problem with my laptop. I do not remember the password bios compaq cq58-230SF. after heating 3 times enter theres a 63207873 code. Thank you for your help

  Bruno

  Hi, Bruno:

  Enter the unlock code...

  72165275

• laptop Compaq CQ58: id of failure to the dst short hard drive RGF0R0

  my notebook Compaq CQ58 3 year, husbands, froze and wouldn't respond, after a few hours I force it down by pressing the power button, when I tried to start it up again once he went int automaticic repair, it took more than 24 hours.

  but the computer continues to freeze and go into the auto repair each time and was unusable.

  I don't have a recovery disk, none came with the computer and stupidley has not created a when the computer was new. being the only other computer that I have a windows vista I could not create one on this machine.

  As their was anything important stored on the computer I decided to reset the computer hoping that would solve the problem.

  I followed the instructions and the computer seems to be going through the motions to reinstall when he got stuck in a loop of

  the HP points logo swirling

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  back to points logo and swirling HP

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  After 48 hours I force crashed computer

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Fiona-s wrote:
  
  

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Hello Fiona-s,

  Thanks for posting in the Forum of Support HP!

  I'm afraid that the HARD drive has failed - the question is material one and all simply restore/reinstall will not solve it. Yes, you need to replace the HARD disk new or better with the SSD. SSDS are up to 10 times faster than hard drives:

  > http://ocz.com/consumer/ssd-guide/ssd-vs-hdd

  > https://en.wikipedia.org/wiki/Solid-state_drive

  There are more than 100 manufacturers and sellers SSD, but personally, I would choose Samsung, Intel, Toshiba, or OCZ ones.

  Microsoft Windows 7, 8.1, and 10 have supported for SSDS. Vista and XP - no

  You will need a recovery media to restore the windows once you have installed the new SSD or HARD disk.

  You can get possible by contacting HP Support. Here's how:

  > http://support.hp.com/us-en/document/bph07143

  > http://www8.hp.com/us/en/contact-hp/contact.html

  > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  Feel free to post if you have any other questions.

• HP Compaq cq58: Bios password

  Hello

  MY laptop HP Compaq cq58 has a power on password I want to remove so that I can use the laptop but when I try to enter the bios it will not accept the password.

  After that 3 unsuccessful attempts, it gives me the following code 85136998

  any help will be appreciated

  @Mluuu

  Enter 30894318

  Kind regards

  DP - K

• How to replace Windows 8 with Windows 7 on a Compaq CQ58

  Hello!

  Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

  1. it is posible to change 06:52 on my laptop CQ58?

  2 and if so, can I have programs default HP on this subject?

  3 and if so, how?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

  2 and if so, can I have programs default HP on this subject? NO.

  3 and if so, how?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) download and install the drivers from the support page for your computer.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Compaq CQ58: Power on paasword

  Nice day

  I forgot the password for compaq CQ58. Code: 69154923 after trying 3 times

  Help, please

  Try to enter

  76832305

• Compaq cq58: I have forgotten/lost the Bios password

  I forgot the bios password

  Stop code is 56293940

  Please review soon

  Model - laptop Compaq CQ58

  Pruduct number - C2B12EA #UUW

  Hello

  Use the code to reset below

  49191386

• Compaq CQ58: bios password

  pls help, bios password for compaq CQ58. code 85654554.  Thank you

  @pendeza

  Enter 30732590

  Kind regards

  DP - K

• Cq58 Compaq: compaq cq58 system off code 97190297

  This is the code that my Compaq cq58 give me.

  97190297

  Please help me.

  @siltricos

  Enter 28898819

  Kind regards

  DP - K

• Realtek ethernet error code driver 35, Compaq CQ58, Windows 8.1

  Hello.

  I have a new laptop Compaq CQ58-353EM. It came with preinstalled system (Windows 8). Subsequently, I installed Windows and HP updates.

  The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In Device Manager, it is represented by a yellow triangle with an exclamation point. In the State of the device, it is stated: your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35).

  Laptop has everything system and hp updates installed.

  I have tried the following to resolve the problem:

  -2 versions of various bios (F.26 and F.25).

  -several add/remove/reinstall the Realtek drivers

  -2 different versions of Realtek drivers: 8.3.730.2012 and 8.20.815.2013 (extract from the Realtek site).

  Ethernet works OK on Ubuntu.

  Any suggestions or solutions to this problem?

  New test BIOS

  CQ58 Notebook PC and HP 655

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• I forgot the password admin or bios for compaq CQ58

  My model is Compaq cq58 laptop need bios password or admin am locked out of my own laptop don't remember password.

  Try Brian.

  78763289

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Compaq CQ58: I forgot the password to power Compaq CQ58

  I just bought a Compaq CQ58 of a pawn shop. When I turn on it requires an administrator password or power on password. It did not come with this information, so I Googled it and saw a few different multi number password that has been proposed to type. None of these work. When I try three times it comes up with "System disabled" and gives the numeric code 96623987. How can I bypass this password?

  Hello:

  Enter the unlock code...

  29781309