Compaq CQ62 screen lights with caps lock stuck.

Similar Questions

• HP G62 U.S.-340, black screen and flashing caps lock.

  HP G62 U.S.-340, black screen and flashing caps lock when I turn it on, and some time it lights up as it should. I tried draining the power of the unit to reset and it wasn't any help. Can you help me please?

  Hi @mikeyh25

  Thank you for your request, I will do my best to help!

  I understand that when you start your laptop, you get a black screen with no error message, but you see the flashing lock light.

  Here is a link to help you.  The computer does not start and the lights blink or the computer will beep.

  Good luck!

• How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Original title: Confirmation screen.

  How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Hi WalterAshton,

  You are welcome.

  If you want to provide feedback to the development team of Windows, visit the Microsoft Web site below:

  http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/feedback

• HP Compaq Presario CQ62 blank display, solid caps lock light light orange, solid f12

  Good afternoon

  Currently, I'm stumped on troubleshooting lights error code for a hp compaq cq62 customers. I tried the hard reset, the reinstallation of the memory and even plug the laptop directly into the wall instead of a surge protector with battery removed. I can't find any solution on the HP site or any other site of forum for this issue as to what a solid caps lock light and a solid orange light on the f12 key.

  Currently I think the customer may need a new back light system or a new processor. Before to come to this conclusion, I hope that there is a clear solution for my problem. Thank you for any assistance.

  Hello @NotURt3kSupport ,

  Welcome to the HP Forums!

  I understand you are having problems starting your PC clients laptop Compaq CQ62.

  A single glance on the caps lock light usually means it is a failure of the CPU and requires a replacement of CPU or the motherboard.

  Also try to go through these documents to resolve startup problems:

  Computer does not start and the lights blink or the computer will beep.
  Troubleshooting of the black screens with no start-up or start-up error message.
  Tests of hardware failures (Windows 7, Vista) or hardware failures (Windows 8).

  You can tell if the backlight is the issue or start by plugging in a VGA monitor to see if the screen is displayed or not. If this is the case, you have on the laptop display problems. If it isn't, you're dealing with a problem of CPU, GPU or motherboard.

  Also, it would be useful to know what product and the operating system you are using. For more information on the search for your model and product numbers, click here: How can I find my model number or product number? What version of Windows you are using, click here: Windows operating system am I running?

  In the event of hardware failure I suggest you contact the services options HP telephone support. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Hope this information helps!

• Pavilion dv6 - 7013cl - black screen with caps lock led flashes constantly at startup.

  The laptop was running hot. I cleaned the dust from the fan area. The battery is bad. I checked the voltage on the charger that was 43v - bought a new charger is 18.5 v. I wiped the ram and started with one and moved to different positions. I have now a black screen with the cap lock key blinks blue continuously and the f12 key led light ceases to orange. Any suggestions what I should try next and which snaps the seeing Cap continuously flashes means - that is a code or have a meaning?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Black screen on startup, caps lock flashing - Compaq Presario CQ57 311SO

  I got this computer from a friend who owns a son.

  We do not know how or when it appeared first, but it's in this State for a few months now.

  It is a Compaq Presario CQ57-311SO and its a little more than 1 year, so store warranty has expired.

  What happens is that when you press the button power has nothing to display on the screen and you do not hear the sounds of typical start-up, the beep and the hard disk rotates upward.

  Instead of this, the Caps Lock key led flashes in the following model, 2 flashes pause 2 flashes.

  The computer is totally immune to any key, usb and cd entries.

  I tried the hard reset and memory sharing in different locations.

  But it seems that the bios itself is corrupt and failed.

  So my question is, can I Flash the bios somehow and make it work again?

  I tried a tutorial on how to do memory flash in FAT - 16 but no noticeable effect.

  Although the guide could be wrong or I could have done something wrong so I would really like to try again if I could get help with instructions from you nice people

  Thanks in advance.

  I solved the problem in dismembering the computer laptop everything and put back the battery CMOS.

  Thank you.

• Types of keyboard uppercase with CAPS lock OFF and vice versa - with laptop and same and external keyboard the on-screen keyboard

  During the night, something happened to the way that Windows 8 reads at the entrance to the keyboard.  It doesn't matter if I use the laptop keyboard, external wireless keyboard or pop-up on-screen keyboard, the results are the same.

  If SHIFT CAPS LOCK is DISABLED, the entrance presents itself as CAPS.

  If SHIFT CAPS LOCK is enabled, the entry is lowercase

  Regardless of the status of CAPS, entered numberic is impossible, either from the top row of keys OR number pad (with NumLock on or off).

  It is therefore impossible to connect to the computer as the password there.

  The laptop is an ASUS (sorry, don't know not the model and it's home now while I'm at work), bought in the last 2 months.  Everything worked great yesterday.

  Any help is greatly appreciated!

  Fixed!  Here is the solution:

  "By pressing the right SHIFT key for 8 seconds in the word 2003is filters a shortcut keys. When you click Cancel if it changes the configuration of the keyboard. When you press a letter key you will get capital, even if you don't have a behaviour the key to the capital. When you press a number key, you will get the symbol above the key as if you had hit the SHIFT key with her.

  To correct this problem and return to the normal mode by default words

  Press the two SHIFT KEYS at the same time. This will cancel the change in the configuration of the keyboard.

  To cancel the shortcut key shift so that this problem does not happen

  * Hold DOWN SHIFT RIGHT for 8 seconds to appear popup filter keys

  * Click on SETTINGS

  * On the keyboard tab go to filter keys and click SETTINGS

  * Under click on shortcut key on the box USING the SHORTCUT to remove

  brand

  * Click OK

  * At the bottom of the Accessibility Options box, click APPLY, then OK.

  * Press the two shift KEYS to disable changes.

  Keyboard should now return to normal mode and if you hold down the SHIFT key for 8 seconds or more, you should never have this problem again. »

  http://answers.microsoft.com/en-us/office/forum/office_2003-word/how-to-turn-of-shift-key-from-activating-filterkey/718a88f3-2f75-4b11-9cbf-236f0b80a72f?msgId=22a93d80-9c76-419f-a25d-467ceb87ecc3&tm=1365534268087

• Windows 7 home first OA: start of the laptop but I have a black screen, but the caps lock button led on and outside

  Dear anyone!

  I need a help of deperate. I have a Windows 7 first OA type HP laptop at home that he is the specification that I have.

  I would write what happened. I always before I close my laptop I chose the tab.and of sleep when I open again is to start automatically, but somethimes I do the Start button. So my problem started when I did my usual close choose the sleep tab and he's fine, leater but10 to 15 minutes, I forgot something and I wanted up, after the start I heard my lap top speed and good early but the screen is pitch black, no company logo and nothing! I've noticed that only a seeing of CAPS LOCK button is on and outside. My question is what is the problem, I hope that no Virus! Or I had to close something? How can I start my lap top once again? Help, please!

  sincerely

  Zoltan

  Try a hard reset:

  http://support.HP.com/us-en/document/c01684768

• Light of CAPS LOCK does not work

  Hello dear guys,

  Had a problem today - some keys on the keyboard do not work properly.

  I opened the hood of the laptop (Pavilion G6 2241sa) and saw that the keyboard cable was loose. I reconnected properly, closed the lid and turned on the laptop. Now, all the keys work well, BUT the CAps Lock light doesn't work well. Key works, but when I press on it - will light, but as soon as I release the button - the light turns off. Light is not. Also, when the real function of the caps lock is on, when I press another button, the light on the surface of the NumLock key but it is dim.

  I recheched cable keyboard again - everything is fine, but seeing locking caps does not stay when you press.

  I don't practice typing for the last 3 months for a few hours a day, so I guess that it also affects the life expectancy of my keyboard.

  Would appreciate any insights on this light lock thanks a lot, lives

  Thank you for your response. But the General solutions do not work here, I'm afraid.

  My inner voice tells me that it is the problem of specif inside wiring that cannot be fixed, perhaps only by the replacement of the entire keyboard or keyboard cable.

  I appreciated your help in any case. My keyboard works, light Verr Maj is not so important, that's why I will end this matter as resolved. Cheers, lives

• pop up on the display screen to voluum/caps lock/internet connection disappeared after update. How to fix?

  Fujitsu siemens amilo laptop

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• HP envy 15 t-j100: screen went white and caps lock flashing after update bios!

  Update my bios to the latest version via app HP support and after it restarted the screen are empty and the caps lock flashing! What can I do about it?

  Thank you for visiting @omidmiri.

  Here on the Forums of HP's Support, you have access to many members of the community with solutions and suggestions to help. I understand that you have a problem with a black screen and the Caps Lock LED flashes after a BIOS update.

  The led near the caps lock shift keys and numlock blinks if a fault is detected during the boot process. The LEDs flash multiple times in a sequence and then stops.

  Please try to manually perform a BIOS recovery, as follows:

  1. Turn off the computer.

  2. Plug the laptop using the power adapter.

  3. When the computer is always off:

     1. Press on and hold the Windows key and the B key at the same time and then press in and hold the power button on the laptop for a second.

     2. Release the power button and the keys.

  By following these steps, the BIOS will reach the EFI partition in order to recover the BIOS to the latest known version of the BIOS from the hard drive.

  Source: Documentation computer won't start not and Emits a LED or beep Code .

  If this does not work, please use the above original document to calculate the number of flashes and troubleshoot accordingly.

  If you think this post has helped you, would help others joining and looking for a solution or you just want to say well done, please click the button accept as Solution or Thumbs Up.

  I would like to know how this happens. If you need assistance, I would be more than happy to continue to help!

  Have a great day!

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• where is the caps lock light on the Microsoft Wireless Comfort Keyboard 5000? Have no light of any kind of keyboard.

  There is NO LIGHT of ANY KIND on my keyboard! -NO F-LOCK LIGHT, NO CAPS LOCK LIGHT, NO BATTERY LIGHT

  Hi JASPYONGTAEK,

  I suggest that you contact hardware support from Microsoft for more information about the available keyboard features.

  http://www.Microsoft.com/hardware/en-us/support

• Caps lock flashing, will not start

  Hello!!

  I have a hp pavilion dv6. last night it worked great, sa I closed my laptop, it went to sleep mode with the adapter plugged but without battery. today when I tried to boot up my laptop, I opened and it started only now I get a black screen with caps lock flashing light, I read on the site on an error that the plugs lock this blink, how many times it flashes before, but, my flashes more than 50 times, according to me, strange worm. What can I do about it?

  Thank you!!

  Hi Steve,

  Unfortunately, there are many possible causes for this problem, I mentioned the video chip as possible example given the symptoms you describe - you need get the machine examined to ensure.  Failure of a component is often extremely fast, insofar as it works one minute then is not the other.

  Kind regards

  DP - K

• HP Envy (E7A75EA): help! Update firmware laptop = death! Flashing caps lock (2 flashes).

  Hi all

  I have just updated the firmware on my desire to 2014 (device E7A75EA code) to "F.68 Rev.A" to HP support and now it does not start!  Instead, all I get is a blank screen and the caps lock flashes twice (tells me means corrupt BIOS!)

  I followed the instructions carefully and no error message appeared in Windows, but the laptop restarts it impossible to load Windows and just gets stuck on this white screen.  I tried removing the battery/power cord, and then holding down the power button for 1 minute, but it did not help.

  Can I boot from the CD/USB and flash back, the old firmware (v43 I think)?

  Help, please!

  He's alive!

  I removed the CMOS, powered by the laptop battery (it starts in Windows), stop, put back the battery CMOS and continues to start correctly.