Compaq Persario CQ60: my deactivation code is 07651, can anyone help me?

Similar Questions

• I use Vista SP2 and updates continuously fail to install. I now get error code 800719E4. Can anyone help?

  I got different error codes and followed the advice online for each of them. I renamed my temporary folder updated and deleted all temporary update files and folders as suggested advice. The problem is not yet solved. Updates install fine, but then once I reboot they fail and windows reverts the changes. I now get error code 800719E4. Can anyone help?

  . Unfortunately that has not fixed.

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall?

  It's what you tried, if not, please do it might help

  The first thing we do is to disable all firewals / anti virus running. This can sometimes block windows update and therefore cause errors like the one you describe.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

   

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall

  What other software products anti-malware are installed and running?

  What updates you trying to install? (Number of KB)

  Please do it in your next reply.

  Information you provide will help someone to provide you with a relevant solution.

  UTC/GMT is 17:28 Thursday, September 8, 2011

• I need to convert a file wps as a PDF using my old compaq pasrio it seems imposible can anyone help

  I created this book on my compaq pasario sr1303wm, this boy is 7 years old. Then, Unbeknowest to me, anyone who wants to look impossible. Open it, because I did it by using wps format. I put on a flash drive and walked over to my friends House who has windows 7, and we could not open it. I need to convert it to PDF as well as others can open it. I tried to convert, but it seems impossible. Its 700 MB of information. I do not have the knowledge to do this, can anyone help?

  You google a converter?  You can convert online .pdf .wps to FreePDF Convert.   I've never used this program so I can't vouch for it, but you can watch over and maybe give it a try.

  Rosie

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?

  How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?

  This is kind of a hack, but it will work.

  1. you will need to download a copy of the Capriola on your computer and install it as a system font. Google Fonts will allow you to install it as a system font in some methods (download a.) (ZIP file, synchronization with SkyFonts or downloadable on the project in Google Code). Edit: the simplest is to add the font to your collection of fonts in Google and then download one. ZIP file of your font collection.

  2. the font squirrel website has a generator of quality web fonts. It may take a font installed on your computer system and generate all the files of web fonts needed him. Place the web font files in the folder of your Muse project where you want to store the web fonts self-hosted. Use the add web fonts in Muse and select the tab fonts self-hosted.

  IMPORTANT: Please read the license terms for any font that you want to use on your website. Fonts Open source as Capriola may seem safe to use at first, but the developer of fonts may have some requirements, such as the display of a link to their web site somewhere in your own site. Other fonts may have monthly limit on number of pages seen.

• Can anyone help me pls with 0xc000012f error code during the installation of Flash Player version 11.6.602.180

  Can anyone help me please with 0xc000012f error code during the installation of Flash Player version 11.6.602.180? I tried several times to install to no avail. Thanks in advance.

  Download installer of http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header offline and save it to disk, and then close all browser windows and run the downloaded installer.

• Can anyone help? I can't install CS6 production premium - 15 Exit Code

  Just received disks, purchased directly from adobe.

  CS6 production premium

  Edition of the student teacher.

  I spent the serial number and log in phase, Setup starts and arrives at 2%, then comes up with the following error:

  Exit code: 15

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s), 0 warning (s)

  ERROR: ASU has quit unexpectedly.

  : Error Media DB: 18

  -------------------------------------------------------------------------------------

  I had photoshop cs6 beta installed but that you uninstalled.

  can anyone help?

  Thank you very much

  It seems to have solved the problem, it's installing (fingers crossed, 15% complete)

  I found a file called "database registered adobe' and deleted

  Now we seem to be working

  I'm on mac by the way

• I get an error code of the 57th. Can anyone help me regarding updates that don't download not?

  I'm trying to download the updates of windows, but some of them don't download and all I get is an error code of the 57th. Help please?

  How to view the log of update Windows

  Click Start and then click Run.

  In the Open box, type %windir%\windowsupdate.log

  and then click OK.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install.  If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.  On the other hand, you can find the error code and other suggestions by searching the forum.

  Also check the Windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

  This may even provide clues as to why the update failed.

  How to read the Windowsupdate.log file: http://support.microsoft.com/?kbid=902093

• Error code: __Stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) can anyone help please

  My laptop Acer gives me a blue screen on start, or crashes on startup.
  I just got an error code:
  Can stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) anyone help please

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I can't read a disk in my computor what can happen in the properties of windows cannot load the driver for this hardware device, the driver may be corrupted or missing (code 39) can anyone help

  I went to put in a cd to look and he wanted to get on-screen computor Ive seen it before, but for some reason any it stoped working. I went on a local drive Q and click with the right button to open it, but then it reads that q:\ is not accessible. access denied

  Hello

  1. on what application you are trying to read the disc?
  2. don't you make changes to your computer because of which the question began?
  3. is the relevant question to a specific application or a disk?
  4. what operating system is installed on your computer?

  There are many causes of Code 39 errors:
   
  * A required device driver is missing.
  * A required binary file is corrupted.
  * There is a problem with the file I/O process.
  * A pilot that refers to an entry point in another binary file cannot load.

  If you use Windows 7, we will first open the convenience store hardware and devices to perform automatic troubleshooting services.

  You can also click "Run now" to this article and check if this is useful.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I get an error code, 0 x 80070070. Don't know why, can anyone help me with this?

  Error code 0 x 80070070, what do I do to fix this?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error messages in the event viewer (start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  http://www.vistax64.com/tutorials/88236-repair-install-Vista.html , as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure:

  Lorien - a - MCSE/MCSA/network + / A +.

• I get the error KB2564958, KB2567053, KB2572075, KB2579686, KB2586448 and KB905866 codes. Can anyone help?

  Here are the error codes I get after trying all the facilities security.

  You get the error code says that a file in your software distribution folder is damaged. If the fixit does not work then there is something another causing a problem with your file system. You can try running this utility: http://support.microsoft.com/kb/947821 and try to see if he can repiar packages.

• My ethernet cable gives me a code 10 error. can anyone tell me wjat that means and how to fix it?

  I have a router and it does not work as my other computer will appear online. and my children can use for their laptops. It's a lynx sys router. I was connected to it and use, I rebooted the system and he went. by checking the system, I have an error code on my ethernet connection. I don't know how to solve this problem. If you know or have an idea as to what this means please let me know.

  Thank you

  Rick

  Google says that this can be caused by a disabled setting in the BIOS, or (thankfully) just a driver issue. Download the model of the computer and work on your work computer go the manufacturer's website and find the network driver in the driver section. Then put it on a USB key or something similar, put him on the no work on computer and install the driver by double clicking on it and going through the installation.

• Error code 80073712. Can someone help me on this?

  When you try to update windows vista I get the following error message: Error Code 80073712. Basically, all the up-to-date don 't work. It goes the same for ITunes etc. Can someone me spin and direction on this?

  Hi PeterKlement,

  Follow the steps below and check if it works.

  Method 1: As you receive the error code 80073712 when you try to install Windows Vista updates, the Windows component store is damaged.

  Access the link below and follow the steps in Microsoft articles to solve the problem:

  Windows Update error 80073712

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712

  Method 2: If the method above is not enough, you start the computer in a clean boot state, and then try to install iTunes.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can check the link below to download iTunes:

  http://www.Apple.com/UK/iTunes/download/

  Hope this information helps.

• 66A error code allows me to install windows update, can anyone help me with this.

  try to install the windows update, but it keeps giving me the error 66 has code that doesn't seem to be in windows help and support anyone can help.

  lisakavanagh,

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3f41498b-9cfa-4ddf-8445-45b961dfaea1 >

  06:25:30 pm06:26: 46 pm