VI server: Get references from the project which has a VI

Similar Questions

• Project is unable to get data from the server when more Flex Builder

  I have a strange problem...
  
  I have a flex project that communicates with multiple PHP files (which are located on a server). These are works very well when I run Flex Builder. For some reason, however it cannot communicate with the PHP files when I download or copy the files from the project elsewhere.
  
  I thought it might be a problem with some relative paths. But I discovered that although the project works when I run it from pojectFolder/bin/main.html, it does not work if I remove it from Flex Builder (without deleting the project files) and run it from the same file main.html .
  
  Isn't it strange?

  What you met sounds like a security sandbox issue. When you develop a SWF file using either Flex Builder or the Flash IDE, the SWF file is placed in a security sandbox ' local trust. This means that it can access any resource that is convenient for the development. But when you move the SWF to a server, the SWF file will have a ' remote' security security sandbox and then different rules apply. Using a crossdomain.xml on the remote resource file should solve the problem.

  You should see the security error when you apply. Here is a link for more details:
  http://www.Adobe.com/devnet/flash/articles/fplayer8_security.html

• Disappears from the project window

  I often use several sites to organize my images.  When I finished with a pan, I use the shortcut "command-w" to close the window of bin.  Sometimes the project Panel is actually selected and closes the window.  I check the "window" drop down and the project Panel has a check mark next to it, but the Panel is not open.  I press the shortcut "command + 1" to try to switch the Panel and hopefully bring to the front, but sometimes, it has no effect, sometimes the bins in my project to open instead of the project itself Panel. ""  Close the software and reboot do not open the project Panel.  Reset the workspace does not open the Panel project, plans to open a day or two before, I don't KNOW where the project Panel, do not open the project Panel.

  The only solution is to trash my preferences.

  I googled this problem for two days and were not able to discover any content about this situation which leads me to conclude that this problem is unique to my system.  I can be more careful with my panels closed, of course, but I fear that it is a symptom of a larger problem on this computer.  This is the computer I use at work and there were several other small things glitch - mostly related to Finder and servers that we use.

  If anyone has any ideas on what this could be, I would appreciate your opinion.

  (Please do not inflate the answers by posting that your system works very well.  I am pleased that you had a problem free experience, but it is not useful to correct my problem).

  You can have multiple instances of the open project Panel. If a given instance is at the root, then the tab indicates 'of the project. ." If an instance is opened in a folder, then the tab displays "Bin: .» So if no instance is open to the root, but one or more are open to a location, then that would explain why there is a tick next to 'Project' in the menu window.

  From an instance of the project Panel that is open to a location, you can get to the root by clicking on the icon highlighted in the screenshot below.

  

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  [root@esx011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0

  [root@esx011 /] # wwpn.pl - v
  WWPN 1.02 Copyright VMware 2003
  Display the names of WW and VMHBA ports for fiber channel cards
  For each relevant here are the Qlogic vmhba and names of Port Emulex WW
  Adapter WWPN PCI (decimal)
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0 / proc/scsi/qla2300/2
  vmhba0:0: scsi-qla0-port-0 5005076300c7b4a2 = 5005076300c0b4a2:5005076300c7b4a2;
  vmhba0:10: scsi-qla0-port-10 500507680110b79d = 500507680100b79d:500507680110b79d;
  vmhba0:11: scsi-qla0-port 5005076300cc9561 - 11 = 5005076300 c 09561: 5005076300cc9561;
  vmhba0:12: scsi-qla0-port-12 5005076300c80db4 = 5005076300c00db4:5005076300c80db4;
  vmhba0:13: scsi-qla0-port-13 5005076300cbb0b1 = 5005076300c0b0b1:5005076300cbb0b1;
  vmhba0:1: 500507630308414 d scsi-qla0-port-1 = 5005076303ffc14d:500507630308414 d;
  vmhba0:2: 500507630313414 d scsi-qla0-port-2 = 5005076303ffc14d:500507630313414 d;
  vmhba0:3: scsi-qla0-port-3 5005076300c7b0b1 = 5005076300c0b0b1:5005076300c7b0b1;
  vmhba0:4: scsi-qla0-port-4 5005076300cbb4a2 = 5005076300c0b4a2:5005076300cbb4a2;
  vmhba0:5: scsi-qla0-port-5 5005076300cca01d = 5005076300c0a01d:5005076300cca01d;
  vmhba0:6: scsi-qla0-port-6 5005076300cc0db4 = 5005076300c00db4:5005076300cc0db4;
  vmhba0:7: b 500507680140, 799 scsi-qla0-port-7 = b 500507680100 799:500507680140 b 799;
  vmhba0:8: scsi-qla0-port-8 5005076300cfa01d = 5005076300c0a01d:5005076300cfa01d;
  vmhba0:9: 5005076300 c 89561 scsi-qla0-port - 9 = 5005076300 c 09561:5005076300 c 89561;
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0 / proc/scsi/qla2300/3
  vmhba1:0: scsi-qla1-port-0 5005076300d0a01d = 5005076300c0a01d:5005076300d0a01d;
  vmhba1:10: scsi-qla1-port-10 5005076300cf0db4 = 5005076300c00db4:5005076300cf0db4;
  vmhba1:11: 500507630318414 d scsi-qla1-port-11 = 5005076303ffc14d:500507630318414 d;
  vmhba1:12: 5005076300 c 49561 scsi-qla1-port - 12 = 5005076300 c 09561:5005076300 c 49561;
  vmhba1:13: 5005076300 d 09561 scsi-qla1-port - 13 = 5005076300 c 09561:5005076300 d 09561;
  vmhba1:1: scsi-qla1-port-1 5005076300c4b4a2 = 5005076300c0b4a2:5005076300c4b4a2;
  vmhba1:2: b 500507680130, 799 scsi-qla1-port-2 = b 500507680100 799:500507680130 b 799;
  vmhba1:3: scsi-qla1-port-3 5005076300c4b0b1 = 5005076300c0b0b1:5005076300c4b0b1;
  vmhba1:4: scsi-qla1-port-4 5005076300d0b0b1 = 5005076300c0b0b1:5005076300d0b0b1;
  vmhba1:5: scsi-qla1-port-5 5005076300c4a01d = 5005076300c0a01d:5005076300c4a01d;
  vmhba1:6: 500507630303414 d scsi-qla1-port-6 = 5005076303ffc14d:500507630303414 d;
  vmhba1:7: scsi-qla1-port-7 500507680120b79d = 500507680100b79d:500507680120b79d;
  vmhba1:8: scsi-qla1-port-8 5005076300d0b4a2 = 5005076300c0b4a2:5005076300d0b4a2;
  vmhba1:9: scsi-qla1-port-9 5005076300c30db4 = 5005076300c00db4:5005076300c30db4;
  [root@esx011 /] # vdf h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  vmhba0:0:0:1 91 82 G 8.5 G 90% / vmfs / vmhba0:0:0:1
  vmhba0:1:10:1 15 G 15 G 0% 7.0 M / vmfs / vmhba0:1:10:1
  63 7.7 M 63 0% G G vmhba0:1:11:1 / vmfs / vmhba0:1:11:1
  vmhba0:1:1:1 63 63 G 0 100% / vmfs / vmhba0:1:1:1
  vmhba0:1:2:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:2:1
  vmhba0:1:3:1 63 63 G 0 100% / vmfs / vmhba0:1:3:1
  vmhba0:1:4:1 63 63 G 0 100% / vmfs / vmhba0:1:4:1
  vmhba0:1:5:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:5:1
  vmhba0:1:6:1 63 63 G 0 100% / vmfs / vmhba0:1:6:1
  vmhba0:1:7:1 63 63 G 0 100% / vmfs / vmhba0:1:7:1
  vmhba0:1:8:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:8:1
  vmhba0:1:9:1 63 63 G 0 100% / vmfs / vmhba0:1:9:1
  vmhba0:5:0:1 59 G 14 G 44 G 24% / vmfs / vmhba0:5:0:1
  vmhba0:6:3:1 29 G 14 G 14 G 49% / vmfs / vmhba0:6:3:1
  37 G 35 G 1.7 G 95% vmhba0:6:6:1 / vmfs / vmhba0:6:6:1
  vmhba0:7:0:1 499 G 450 G 49 G 90% / vmfs / vmhba0:7:0:1
  7.4 G 7.3 G 180 M 97% vmhba0:9:0:1 / vmfs / vmhba0:9:0:1
  37 G 36 G 1001 M 97% vmhba0:9:1:1 / vmfs / vmhba0:9:1:1
  vmhba0:9:3:1 G 7.4 7.4 G 0 100% / vmfs / vmhba0:9:3:1
  vmhba2:0:0:8 39 G 39 G 29 M 99% / vmfs / vmhba2:0:0:8
  [root@esx011 /] # df h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  [root@nbxva011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0
  [root@esx011 /] # cat /etc/lilo.conf
  command prompt
  Timeout = 50
  boot = / dev/sda
  install=/boot/boot.b
  linear
  default = esx

  image=/boot/vmlinuz-2.4.9-e.71smp
  label = linux
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71smp.img
  read-only

  image=/boot/vmlinuz-2.4.9-e.71
  label = linux-up
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71.img
  read-only

  image=/boot/vmlinuz-2.4.9-vmnix2
  label = esx
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-vmnix2.img
  read-only
  Append = "mem = 800M cpci = 0: *;" 1 : * ; 2 : * ; 3 : ; 4:5:0; 7:0; 9 : * ; 10:; 11:; 12: *; 14:; 15: *; 17:; 18: *; 20:; 21: *; 23:; 24: *; 26:; 27: *; 29:; »

  It's client server which I can not restart the server boot or HBA settings view.

  All points will be awarded.

  Thank you

  And in MUI - HBA is not shared with Service Console

• I regularly get wrinkles dividing the text which I cannot remove. The lines seem to occur after the typing of consecutive asterisks intended to divide the text segments.

  Original title: wrinkles in text

  I regularly get wrinkles dividing the text which I cannot remove.  The lines seem to occur after the typing of consecutive asterisks intended to divide the text segments.

  Much appreciated assistance by removing the lines.

  Thank you ~.

  1. you must identify which application you use to create your documents.

  2. in addition to the name of the application, you must specify its version.

  3. Please ask your question in the appropriate forum.  Assuming that you are dealing with a version of Microsoft Word, which would be the forum Microsoft Office Word.

  4. Notwithstanding the foregoing, if you use Word 2003, 2007 or 2010, see--> http://www.techrepublic.com/blog/msoffice/add-horizontal-lines-to-a-word-document/3886

• I keep getting messages from the center of Action McAfee Anit-virus, Anti-spyware & firewall disabled, as well as Windows Firewall

  It started after a message popped up on Adobe Reader and I deleted it.  I tried to run applications without success.

  Hello

  Welcome to the Microsoft Community and forums thanks for posting the question. According to the description, you get messages from the center of the Action as McAfee and the Windows Firewall is disabled.

  Please answer a few questions to refine the question.

  1. you remember to make changes to the computer before this problem?
  2. you have more of a security software installed?
   
   
  Anti virus definitions update and check the status

   

   
  Method 1: I suggest you to enable and disable the Security Center
  service in Windows 7:
  a. click the Start button, type services.msc and pressenter.
  b. in the list of Services, right click on Security Center, clickingProperties
  and select disabled.
  c. restart your computer.
  d. once again, follow steps a and b, and then select Automatic (delayed start)
  e. start the Service.
   
   
  Method 2: You can uninstall and reinstall the security software and check.
   
  
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.

  
  More information on:

  
  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

   

  Hope this information helps. Please reply with the status so that we can help you.

• currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• Drag the sequence from the project Panel to other sequences DO NOT insert all clips containing

  Hi all

  I have no ' t know when this behavior changed, but when I dragg one sequence from the project Panel to another sequence, it will not place this sequence as a whole (as it used to be), but as you have selected all the clips containing. Its a good thing, but can someone tell me how to do the old way? I tried to keep alt-shift-etc... Did not work.

  Try the left button from the top on the table of the sequence. He alternates between the entire sequence in medallion, as before, or as individual items.

• I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.

  I just bought a new desktop computer using Windows 7.  I installed Windows Live Mail and now am trying to migrate mail from my laptop which has been using Vista and Windows Mail.  I need help please.

  The Vista system export your contacts and send to CSV files, then import them into Windows Live Mail.

  Good luck.

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Dear Apple, I am Sayed of Egypt living in Saudi Arabia and I am a user of the I produced phone since I phone 4 and really I'm shocked by the incident that happened to my phone I 6 when he returned on the table which has led to the breakdown of screen whic

  Dear Apple, I am Sayed of Egypt living in Saudi Arabia and I am a user of the I produced phone since I phone 4 and really I'm shocked by the incident that happened to my phone I 6 #F2NNQ1WZG5QW when he returned on the table which has led to the breakdown of screen which is quite weird for me and not accepted for the kind of quality of apple products , I went to the Agency here for the interview they asked me to contact you directly. I'm waiting for your answer to fix my screen. Thankx Sayed

  You don't talk to Apple. This is a user forum.

  Accidental damage are not covered by the warranty.

• When Photoshop cc supports raw files coming from the Nikon d5500 has been added?

  Hello

  When Photoshop cc supports raw files coming from the Nikon d5500 has been added?

  IAM a happy Photoshop user, specially for my files raw... I find it frustrated that I can't work on my files at the moment...

  Greatings Danny

  The d5500 has been added just launched and Adobe working on support. Can't say how long for sure, but it should be a month or two. Meanwhile, you can shoot in NEF + JPEG and set Camera Raw to open your JPEG files as well. Not much data, but will be better than nothing...

  Benjamin

• I hava the key which has a lot of data, how can I led all data

  In the database for duplicates, I hava the key which has a lot of data, how can I remove all the data.such as I hava key: aaa, but the data has three: 123, 234, 456, how I can del the 123,234,456, I used the cursor to del (Cursor.delete ()), but I can only led the first have: 123 and used the cursor.count method) , I find the method return 2 for me. and my question is how to remove the two remained. Thank you all

  After calling Cursor.delete, call Cursor.getNextDup to move to the next double, then call Cursor.delete again and repeat.

  -mark

• To get disconnected from the game server

  Original title: recently moved from Virginia to Kentucky, since then I am disconnected to each game server I tried after 5 minutes.

  Recently moved from Virginia to Kentucky.  Since then I get disconnected from each game server, I tried after about 5 minutes. What is happening on 2 separate computers.  Any suggestions?

  Hello

  1. What is the operating system installed on your computer?

  2. are you referring to the games installed on your computer, or play games online?

  3. which web browser you are using?

  4. you get any error message?

  5 is the issue limited to game servers?

  Please provide us with more information on this issue to help you best.

  Try to disable the antivirus software and check if it works very well.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: after completing the troubleshooting steps, please activate the antivirus software

  If the problem is only on two separate computers, it could be a problem with your Internet connection.