Compaq-Presario: change the motherboard

Similar Questions

• Satellite L100 - 121 PSLA0: can I change the motherboard with a better video card?

  Is it possible to change the motherboard for a Toshiba Satellite L100-121 PSLA0, which is a 945GMA of Intel graphics card, with a motherboard with the best video card, or just the video card?

  I want a better video card on my laptop, so I can change it?

  Hello

  You cannot move the graphics card because it s mounted on the motherboard.
  He welded s and cannot be deleted

  But I wonder why you want to replace the mobo together to get the best graphics card. Is that a card mother books is one of the expensive laptop parts.
  The replacement would cost about 300-400 euros.

  I think a desktop PC with a new graphics card would be much cheaper ;)

• 2192el Pavilion dv6: change the motherboard

  Hi all. In my book, there is a motherboard 3659 32.25. But I can change the motherboard? And if so which?

  k

  Hello

  Looking at the Maintenance & Service Guide ( Page 76 ), the Council only listed system is one that you have already - that is to say graphic with dedicated 1 GB memory.

  In general, even if there is a better option, at the time wherever you take into account the cost of the Commission, editing and "tattoo" the bios to make your oem windows remains on, it is usually cheaper to buy a new laptop with a better graphic option.

  Kind regards

  DP - K

• activation of the preinstalled original operating system after changing the motherboard

  I have a HP system which was preinstalled windows Xp professional at the time of my purchase. Now my use of that during my system motherboard got crashed, after that I have to change my motherboard now the problem is that I can my installation of previous version for windows xp again?

  Change the motherboard outside of warrny conditions invalidates the OEM license with which the machine shipped - you will need to purchase a new license for Windows.

• I need to change the motherboard in my laptop. How to reactivate XP and Office?

  I need to change the motherboard on a Dell laptop because of the infamous video problem Nvidia. The laptop has XP Professional, Office 2003, and all my other programs on it. After I have change the motherboard, I guess I'll have to reactivate XP and Office. How do I do that? Thank you.

  Hi J_C_H,

  
   

  Method 1: follow the steps described in the article below to activate Windows XP

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

  
   

  Method 2: Follow the steps described in the article below to activate Office

  Activate Office
  http://Office.Microsoft.com/en-us/Visio-Help/activate-or-register-programs-in-the-Microsoft-Office-system-HA001118776.aspx

  Method 3: You can contact a Microsoft Product Activation Center

  How to find a phone number for a Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929/en-us

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• After changing the motherboard, my Windows 7 product key is not valid.

  I bought this copy of windows 7 has been authorized. then I changed the motherboard, now it tells me that it is no gooid. ??

  Original title: why is my key no gooid?

  Windows 7 license came preloaded with the previous mobo?

  If so, then its cannot be transferred to another computer.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• How can I reactivate Windows 7 32-bit after changing the motherboard free of charge?

  I need to reactivate it. Need something good advise. change the motherboard and can not activate. I don't have a $199.00 to buy a number.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If this is an OEM of Windows 7 version that came with your previous motherboard, you cannot transfer it to a new motherboard.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• change the motherboard

  Hello world!

  I need to change my motherboard.

  I have problems with the reinstall my Soft Adobe?

  Thank you!!

  Sonia

  If you are able to disable the software before you change the motherboard, you are less likely to have a minor problem, but in General, you should not have problems.  Deactivation of free activation being used for another use.  Your license allows you to have two facilities activated, in order to always have one available if you have never used the two yet.

• Windows XP Home Edition formatting after changing the motherboard

  OK just like a small thing im, eager to know, is it important that I changed my motherboard if I reformat my compaq with wondows xp home edition? I mean, there will be difficulties to install the operating system? or everything will work very well with a card mother diferent

  A Compaq Windows XP Recovery disk will only install and activate with the original Compaq Compaq exclusive factory-installed map mother. Carey Frisch

• How to change the motherboard on my Satellite L655D password?

  I need to change the password on my laptop Toshiba Satellite L655d motherboard, but I don't know where I can.
  I'll be very grateful if someone can help me.

  Concerning

  Full Saravia

  Password motherboard, you mean the BIOS password. Right?

  First of all, he must know the old password you?
  If you do not know the old password to the BIOS, you will not be able to remove this
  In this case, you will need to contact the ASP from Toshiba (service) in your country.
  The technician would be able to remove an unknown password.

• Wireless connection fails on G10 after changing the motherboard

  I had a few problems with my wireless for quite awhile. Basically, whenever I turn on my pc my internet connection fails. I always do an RSP on my wireless connection. Finally, it works. This problem started when a technician has changed my motherboard to another question. Since then, it has changed my wireless card. The problem remains tho. Is there a patch for this?

  Hello

  Is your wireless network, Intel 2200BG If yes try to download the software for this www.intel.com. It is if you have a connection. Another thing to try is to go to the properties of the wireless card and make sure that the power supply is set to high and the output amplifier is set to enabled.

  It could be a mix up with the router by which DHCP not allocate an IP address that is inappropriate. You can go into the router through the admin option and disable this feature. However, you will need to return the laptop an IP address. Click on network connections and click with the right button on the wireless connection properties. You should see the list Internet TCP/Ip Protocol. Double click and assign the IP address manually. You must also enter the other info that can by typing ipconfig in the folder c: / prompt.

  HTH
  Norskman

• Compaq-Presario CQ5110F: the graphics card upgrade

  In order to upgrade to Windows 10, I have to upgrade my video screen, so I purchased and installed a 2 GB NVIDIA GeForce GT 730 in PCI Ex16 slot on the motherboard, but my system of refuses to recognize it, even if I changed the main video screen in the BIOS PCI Ex16. What I'm doing wrong here? I'd appreciate any help. Thank you

  Hello:

  The Nvidia 730 series cards do not work on an old PC.

  The BIOS will not accept it.

  If you want a nVidia card which is close to the 730, you go with GT 630.

  Also, there is a workaround to use the integrated graphics card and upgrading to W10.

  See the discussion below.  You launch the DVD you made from the windows desktop and ignore the checking of updates.

  http://h30434.www3.HP.com/T5/desktop-video-display-and-touch/NVIDIA-GeForce-6150SE-nForce-430-chipset-not-compatible-with/m-p/5173180#M41749

• Change the motherboard & processor on the retail XP pro machine

  I will be able to change my case with my XP Pro retail license existing and mobo, cpu?

  I will be reusing the existing HARD disks and optical drives.

  Yes, but with a new motherboard if fails it "Repair Installation", you may need to perform a clean installation of XP.

  Still think XP has existed for some time it can't hurt to download the latest drivers from device XP and updated the BIOS from the web site of the manufacturer of the mother/support download card.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
  then back at the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.

  First try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  Once Windows is installed:

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard? Visit their site to support for the latest drivers as the CD that came with the motherboard may have older less stable drivers.

  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 3 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
  35 to 40 ° C at idle and 60-65 c max when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ):
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  Also two tabs (memory and SPD) that shows the actual speed of the memory and 'SPD' tab displays the nominal speeds for each location of memory which is filled.
  Note: COMPARE the two values, the actual speed should not exceed the rated speed of your memory.
  http://www.CPUID.com/cpuz.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  CPUID HWMonitor is a hardware monitoring program that reads health sensors main PC systems:
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  Partition Wizard Home Edition:
  (There is also a bootable CD version)
  http://www.partitionwizard.com/free-partition-manager.html
  Some of the features and functions include: resize and move partitions, Partition recovery after an accidental deletion, Create partition, Delete partition, format partition, convert partition, Explore, Hide partition partition.
  Change the drive letter, a partition active Set.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Hiren BootCD
  http://www.Hiren.info/pages/Bootcd
  Hiren BootCD from USB (USB key)
  http://www.Hiren.info/pages/Bootcd-on-USB-disk
  (something more questions)

  UBCD4Win:
  http://www.UBCD4Win.com/index.htm
  UBCD4Win is a recovery CD bootable that contains software used for repairing,
  restoration or diagnose almost any computer problem.

  MyEventViewer - an easy way to display your event logs:
  http://www.NirSoft.NET/utils/my_event_viewer.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.