Satellite L100 - 121 PSLA0: can I change the motherboard with a better video card?

Similar Questions

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• Re: Satellite A50 - how can I change the boot with BIOS password priority?

  I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?

  The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.

  Thank you

  The boot priority, that you can change in the BIOS.
  Go into the BIOS with ESC, enter your password and then you can change it.
  But don t forget to save the changes.

  That s all and then you can boot from the CD.

• Satellite P300D-220: How can I change the Toshiba Multimedia Buttos config

  Hello

  How can I change the options for the buttons to support key Toshiba?

  I want to change the button to 'cut the computer', in 'turn led light on or off.
  Toshiba Button support shows only two possibilities: CD/DVD and in German "Your aus" what means "mute".

  What it means?

  In Vista was the button with the right option, now I have installed Windows 7 Ultimate x 86. Since then the mute only it.

  I hope you understand my question.

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=125277
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=34487

  This two threads did not help me, because I find no "utility control" in the list of the drivers for my computer.

  Hello

  Win 7 is different!
  The configuration of keys on Toshiba utility is not available for Win 7!
  After the installation of the VAP (value added package) for Win 7, you can configure the keys by pressing the button for the first time.

  I did it on my laptop after changing from Vista to Windows 7.
  I pressed a button and the window a pop-up asking me which application should be attributed to this button.

  As far as I know after the configuration it of not possible to change this once again

  Maybe after the new TPC facility you could configure the new buttons

• Satellite L300D - 11 M - can I change the video card?

  Can I change the graphics card in my notebook? For example on 512 or more?

  Hello

  No, the GPU upgrade is not possible because it is part of the motherboard.
  In most cases, the GPU is fixed and cannot be deleted.

  There is much discussion about the question about the GPU/Exchange upgrade and you will always find the same answer; NO, IT S NOT POSSIBLE.

  Welcome them

• Satellite Pro A40: How can I change the video ram

  Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
  How can I change my 64 MB
  I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

  what someone of nowhere leaving to do this please

  Jay

  Hello

  As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
  S control Intel cards automatically memory allocation.

  This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
  The whole process runs automatically and you do not need to change anything!

• Satellite Pro L20 - How can I change the optical drive?

  I want to change the optical drive in a satellite pro L20 but I'm having trouble finding instructions on how to remove it. Can anyone help?

  The CURIOUS reader is fixed with a screw at the bottom of the unit. Then, turn the computer over and remove one screw an optical disk drive.
  The second screw is hidden under the keyboard. That's why this screw must be removed also. And then disconnect you should be able to pull-out of the optical drive.

  But note; If you have no experience of these things, ask a technician for laptop computer to help him.

  Good luck

• Satellite A210-171 - how can I change the contrast and brightness?

  I have myself in a bit of a mess here!
  I am a digital artist and because I had trouble with my colors of the laptop to the printer I have advised me of many artist to buy a color calibrator.

  My software has come today, but I was not able to do anything with it yet because it asks me to put my * contrast and brightness to 50% maximum setting * and I can't find where it is?

  I have a satellite A210-171 - please someone help me
  I'm desperate!

  Hello!

  The brightness and contrast, you can change in display properties.
  Check it!

  In addition, you can change the brightness of the screen using FN + F6 and FN + F7.

  Good bye

• Satellite Pro 440cdx - how can I change the brightness or contrast

  My screen is weak and hard to see objects on the screen, any advice will be more welcome.many thanks for any help.

  Hello

  The brightness of the display can be changed by pressing the FN or FN + F6, F7 key combination.
  The contrast could not be changed on the screens of laptops that it is set automatically.

  But if it of very difficult to see anything on the screen, then an FL inverter may default.
  The fl inverter is a small part that controls the brightness of the display.
  Maybe it s need to be replaced.

• Satellite Pro A300 - How can I change the size of the partition?

  Hello
  My Satellite Pro A300 came with 2 different partitions, and I would like to change the size of the partitions (the data partition is too small).

  Which would affect the recovery tools? Is there proposed formulas?

  Thanks in advance,

  Andres

  What operating system do you use on your laptop?
  If you use Vista, this document could be useful for you:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

  This should normally does not affect the recovery of HARD drive but make sure to burn the disc of recovery if you didn t it yet.

  If you have the recovery disk, you are on the safe side.

• Satellite Pro A10 - How can I change the start property?

  Hello

  How can I chance the A10 coastal boot?
  With ESC, I can access the BIOS, but I can't chance anything except the time.

  Thank you
  Tobias

  Hello!

  I think you should check the BIOS again because as far as I know, there you can change the boot priority.
  In addition, you should find more options in the BIOS as only the Date and time.

  Check it!

  Good bye

• Can I change the operating with another drive, and then use the recovery CD to restore my operating system on the new drive?

  I have 2 hard drives. I want to replace the smallest disk, which can be found be the operating drive. If I removed and installed another drive and used the recovery CD the I bought with the computer, I'll be able to re - install new hard disk?

  Hello

  Yes, you can change the hard drive and reinstall Vista using recovery disks.

  You may or may not have problems of reactivation.

  If you do, use the telephone option and hold firmly explain to a real person in the situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Change the background color of a region, I can only change the box with text

  Hello. First of all, sorry for my English.
  
  I created a new model of the region in my application and I want to change the entire background to silver color.
  After reading the forum, I tried this:
  
  body = background-color: Silver;
  
  in "attributes in Table form.
  
  It works, but only the area with text are silver. I want the entire region with a background silver, (like a scratch on the screen, with black labels).
  
  My region are copied from the region of breadcrump and there the next CEB code:
  
  < div class = 'wire of Ariane-region' id = "' #REGION_STATIC_ID # ' #REGION_ATTRIBUTES # > #BODY # < / div >"
  
  I also tried putting < body bgcolor = "gray" > in several places, but never with the same results.
  
  Another question. I created a theme in my themes of the workspace to play with it, but... where are the files of ccs? they are not in "/ i/themes"... .and as part of the apex I don't see a way to change the footer, and an other things I want to do.
  
  Published by: Andres Vilallave on February 15, 2012 16:14

  Andres Vilallave wrote:
  Yes!, it works...
  Well, I think I have more visual changes now... (God thank you...)

  Good.

  But I want to learn more about the themes...
  I would like to change the theme 4, "Topaz".
  As you say, I created a copy of the file ' i/themes/theme_4"as"i/themes/my_theme_4 ".

  I have said "+ are not... create new files there as these can be changed by future updates APEX. Create your own theme folder. + ", i.e. to use a different physical location, which is referenced by another virtual folder (depending on the architecture of the Web server used).

  Then I created a new theme based on theme4 in my workspace as "my"Topaz". "" My Topaz"" theme is now available in the repository of the theme in "custom themes.
  Now I can change the templates, etc., but the css files what, image files, etc., are My_Topaz to help? Are ¿where?.
  Guess as you say I need to link "" My Topaz"" theme in the my_theme_4 folder, by assigning files in the models of the apex, how can I I do this?

  The definition of header for each page template in the theme contains elements of binding that reference the URL of the CSS as style sheets:

  These must be changed to refer to the new URL CSS files:

  Notice that the page templates use conditional comments to provide additional style sheets with CSS hacks and fixes for broken Microsoft browsers.

  Some other models can also reference image etc. of localities in theme files (although this is less common in the APEX 4.0 + themes).

• How can I change the speed of transmission of videos in AE CS5

  Can someone tell me how to change the speed of transmission of a video in After Effects CS5?

  I add the video to the queue rendering and after that I have to make a video of 6 seconds was more than 400 megabytes. I saw a comment to change the bitrate, but I don't know how to do this.

  Read this and this.

  Mylenium

• How can I see the information on a dedicated video card?

  Hey guys,.

  I have a laptop dv6tqe with a 1 GB GDDR5 Radeon HD 6770 M, which has a switchable graphics. the simplified ATI provided with the laptop Control Panel has all the 3D options for the process that I have chosen to activate the 'high performance' mode to use the dedicated GPU. The latest games play fine without delay, however when I shoot upward of dxdiag or any other vid collection card information software the 6770M does not appear. Only Radeon integrated graphics card running in power saving mode, even show when im all current laptop running with the high performance parameters. Is it possible to go back to information on the dedicated GPU?

  You can install Speccy below the link which is a 3rd third party tool and find this info

  http://www.Piriform.com/Speccy

  OR

  You can go to the BIOS and find this info as well. In order to load BIOS turn OFF the laptop and after power ON, keep pressing F10 to load the BIOS of the laptop screen and check system information.