Compaq Presario SR1760AN AMD3200 + hangs after system restore just after the XP splash screen.

Similar Questions

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• HP Pavillion DV5-1234SE does not start after the HP splash screen

  I have a HP Pavilion DV5-1234SE, which will not load Windows.

  It worked very well, I have stop him - and when I tried to start the next time, be put in place - but will only pass the first black screen with the HP logo. I'm trying to access the start menu, and tried to start in safe mode - but it will not go beyond the black HP screen.

  Any suggestions?

  Thanks for the suggestion. I ended up taking to someone and it turns out that the motherboard is fried. (Greaaat!)

  Rather than waste $350,00 replacing I'm just going to get a new laptop (not HP).

• System Restore will set a BAD_POOL_CALLER blue screen?

  If I do a "System Restore" to start the system and pressing Ctrl F11 to try to avoid a constant blue screen BAD_POOL_CALLER... what will solve the problem? The "System Restore" will erase all my files? I have a Dell Dimension E520 running Windows XP Media Edition

  If you use Ctrl F11, which calls for the restore by Symantec PC Dell and who could restore your system to the as shipped on the status of the plant and you would lose all your personal files:

  NOTICE: Using Dell PC Restore permanently deletes all data on the hard drive and removes applications or drivers installed after you received your computer. If possible, back up the data before using PC Restore. Use PC Restore only if system restore did resolve your operating system problem.

  A Windows XP System Restore does not know or care about your personal files and allegedly, leave them intact.

  You can read about the various dining options in the Dell E520 (page 53) user manual here:

  http://support.Dell.com/support/eDOCS/systems/dime520/en/OM_en/NH730A01.PDF

• System Restore, deletion of the photo and file rights issues

  I had trouble with my phone now for about half a year. Awhile back on downloading a program, my computer began to tell me that I didn't have 'rights' to remove a file, access a folder or even to open a program, when I have full admin on her rights. This problem has persisted, but not as much as he used to.

  The following problem was born about two months ago. I noticed that my laptop didn't is more let me restore the system yesterday. The day before the current day was the only day where he had registered under a restore point. My laptop still has this problem. Not only that, but every time I do a system restore it says failure of the resolution.

  At the beginning of this year as my C: drive grew low space I created a picture file on my D: drive and transferred all my current photos to the new folder and kept the old one on the C: drive, but deleted all the images in the default image folder. Now tonight, I deleted a program out of my D: dive that was installed a year ago that I no longer use, and after removing the photo on my D: drive folder wiped. There are thousands of images recorded in this issue said. I tried a system restore to recover images, but the restoration of the system, as said before, has failed.

  I would appreciate help in how to conquer these questions. There is not much I can do until my images are retrieved, so fast response and the help is even more appreciated.

  'There not much I can do so that my images are recovered'

  You asked for advice, I gave him.

  And I said not to use the same machine:

  "
  1 stop using this computer; as you're going to overwrite deleted files, which are not deleted, until they are crushed.

  2 preference slave to your hard drive in another computer, install one of the programs of recovery in this computer and read your disk from there.

  3 or put your hard drive in a USB external hard drive enclosure, attach to another computer and do the same as 2.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  System Restore is not involved in the data;

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  "System Restore is not intended for the personal folders backup, so it cannot help you recover a personal file that has been deleted or damaged. . You should regularly back up your personal files and important data using a backup program. »

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update, sent the 16/10/2009 stops HP Total Care of work, need to do system restore to get the programs to work.

  Do system restore to get the programs to work. programs worked fine until Windows updated 10/16/2009

  Never, EVER use system restore to 'Cancel' an update, Windows Service Pack, or upgrade of IE! If you feel that an update is the cause of a problem, first uninstall the update. If the problem persists, then you can try the system restore.
  
  Please indicate your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7 RTM) when you post in a forum or a newsgroup.

  Can you tell us what updates have been installed?

  Have you contacted HP Support about this? ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• Screen goes black after the log on screen and works fine in safe mode.

  Original title: black screen.

  dv65 Pavilion my laptop starts up, but the screen goes black after the log on screen, judging by its instllation it works, but not the screen. It works very well in SafeMode so. Laptop is 3-4 years. I tried to connect it to my TV but she copy behavior laptop screen. Because of this problem, I had to return to the State of the plant 3 times this month. Plese help!

  Hi Avint,

  Glad to know that you were able to resolve the issue and thank you for sharing information.

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• BlackBerry Smartphones Blackbold does not start after the progress bar screen. any help

  I have a problem with my blackberry bold 9700. When I reboot, the next screen that comes after the progress bar screen is my network name of phone, and nothing happens. I get a screen of "vodafone" with their logo.  nothing happens after and I am not able to access blackberry. What's wrong. any help on how to run again

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  Good luck and let us know!

• HP Compaq Presario CQ57: Compaq Presario CQ57 - 310SD BIOS disabled system password

  Hello

  I have a laptop HP Compaq Presario CQ57-310SD and tried to reinstall Windows.

  but I can't boot from CD/DVD, just the HARD drive and USB key appears in the F9 menu.

  I tried to log in to the BIOS (with F10) to check the settings, but I forgot the BIOS password.

  After the 3rd wrong password, the bios unlocked.

  System disabled
  55212081

  Help, please.

  Thank you.

  Hello.

  Try the following code:

  InsydeH2O BIOS (Acer, HP) 40170007

  You can also use password unlocker:

  https://www.BIOS-PW.org/

  Kind regards.

• Compaq Presario 2029UK: display crashed after update to windows 10

  Hello

  I just upgraded to windows 7 to windows 10 and my screen is crushed, regardless which data resolutions I choose.

  When I look at the map it reads as follows: Microsoft Basic graphics card.

  I checked for updates and two windows and display card driver back the message that they are up-to-date.

  When I go to the HP site to download a driver, the only driver to my PC is a lightscribe one. Nothing for the graphics card.

  Does anyone know whre I can download a driver to solve the problem, or if there isn't one, how can I get my resolution to be what it was (I don't know what it was but I know that it is not available now).

  My screen is a LG Flatron E1940-S-AP

  Thanks in advance

  Tog

  Hello:

  The problem you are having is that Windows has installed a generic graphics driver, so you can see the screen and not much more.

  There is no w8.1 or W10 graphics driver for the graphics card to your PC.

  Your model is a desktop Compaq Presario Media Center SR2029UK PC?

  If so, see if you can manually install the latest Nvidia graphic driver and run the W10.

  First of all, download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download, save, but do not run this graphics driver.

  http://www.nvidia.com/download/driverResults.aspx/82758/en-us

  After downloading the above graphic driver file, right-click on it and select 7 - Zip from the list of options.

  Have 7-Zip extract of: and leave it to decompress the file in its folder.

  Go to Device Manager, and then click to expand the category of device of graphics cards.

  Click on the graphics card of Microsoft Basic.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the graphics driver installed.

  Restart the PC.