Satellite P300 itself keeps restarting after the initial splash screen.

Similar Questions

• PC keeps restarting after the Windows startup screen

  I recently bought a refurbished HP compaq 6005 microtour office format. The computer came with a blank hard drive with no OS loaded on this subject. Before this purchase, I owned a laptop with a Samsung EVO 850 250 GB SSD inside which has Windows 7 installed and worked fine until the motherboard went bad on it. I removed the SSD that laptop and installed in the new office refurbished. The computer starts up and reaches the HP invent display shows options key function and says "press any key to Option ROM Messages." and then after a few seconds goes to "starting Windows" screen and after a few seconds it goes back to the same HP invent screen.

  I tried the things:

  The hard drive is detected by a name in BIOS

  Made sure boot order has been on hard drive, first

  Tried to start Windows in Mode safe mode, last known good configuration and disable automatic restart in the event of system failure

  When I disabled automatic restart in the event of system failure I got a blue screen that says, "a problem has been detected and windows was forced to need down to avoid any damage to your computer...". ""Search for viruses on your computer. " Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. ... "CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Hello David,.

  According to your description, I realize you are trying to install a Portable SSD hard drive in a desktop computer that has Windows 7 installed on it.

  First of all I would say you do not to do since both hard drives have different specifications, and this can adversely affect your computer. I suggest you to contact the manufacturer of your computer before this change of material.

  On Windows, it is not recommended to mix computers with different operating system installed on a hard drive specifications. I would say to reinstall the full operating system such that two computers use different Hardware.

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

  Thanks and greetings
  Sarandeep S - Microsoft technical support.

• Phone keeps restarting after the last update

  After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
  HELP ME GUYS!

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• Vista keeps restarting after the installation of updates

  I have IBM laptop computer a customer T61, Vista Home Premium. Starts and goes to the "Configuring updates 3 of 3, then it goes to"shutting down"and keeps restarting."

  I tried safe mode, last good, from CD and repair of Windows, nothing worked.

  Any ideas on what else to do only a reinstall full?

  Thank you

  Ed

  Try this
  http://support.Microsoft.com/kb/949358

• my laptop keeps restarting after the installation of updates

  my laptop is stuck at step 3 of 3 (only display 0% complete) after the reboot for updates, then restart again and again, with the same supposed progress, I ve let it doesn't restart on 7 times.still no good.

  Tell me what are the steps to solve this problem

  Hi Amrbialy,
  When your computer is turned on, push and hold down F8, this will bring an option before it starts on your desktop. Choose "last known good configuration".
  If this has no effect. Then do the same thing, except choose Safe Mode. When it boots to desktop click Start > all programs > Accessories > system tools > system restore.

  Then it will give you an option to choose a date to return. Choose a date before you install updates, and then click OK. Restart your computer.

  It will be useful.
  Let us know how it goes!

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Compaq Presario SR1760AN AMD3200 + hangs after system restore just after the XP splash screen.

  Epic to date.

  PC not working and suspended on the start Recovery xp splash screen.

  1 wouldn't start or start SafeMode etc.

  2. out of hard drive and plugged on the other pc to save important info because that wouldn't boot. Copied files-WHEW

  3 restarted and tried to recover from D:\ recovery software. -Hangs on reboot after the start screen each time ARGH.

  4 caught Recovery CD that were made when the PC was brand new - failed 5 times! IE system hang after starting xp

  5 Pen Drive has created and initialized Compaq ISO - PC Doctor DOS Version.

  6. inspected PC - found a hard drive to have multiple errors and so dead - replaced by wd 500 GB drive NINE.

  7 PC DOCTOR BACK - pass all other systems, motherboard, RAM, etc.

  8 were again trying to install from the recovery CD "R"is only an option as no recovery partition." 2 unsuccessful attempts so far.

  9 think about jumping from the Westgate bridge.

  Please help if you have any ideas or if I missed something extreemly critical please let me know.

  Signed

  Frustrated, exhausted, SAD ...

  GDay Ruette,

  PROBLEM SOLVED.

  Has decided to remove Kboard and rear USB ports USB mouse and stick 'em in the front.

  HEY PRESTO START!

  Obviously a problem with the rear of the motherboard well that the PC doctor reported no problems.

  OH well Im happy like a cat in #$% T. Update for XP3 reinstalled updates of all HP SP for this system and we are offshore and running. TIP for any related problem: always google and read similar messages: you can often find the answer that I did.

  

• HP Pavillion DV5-1234SE does not start after the HP splash screen

  I have a HP Pavilion DV5-1234SE, which will not load Windows.

  It worked very well, I have stop him - and when I tried to start the next time, be put in place - but will only pass the first black screen with the HP logo. I'm trying to access the start menu, and tried to start in safe mode - but it will not go beyond the black HP screen.

  Any suggestions?

  Thanks for the suggestion. I ended up taking to someone and it turns out that the motherboard is fried. (Greaaat!)

  Rather than waste $350,00 replacing I'm just going to get a new laptop (not HP).

• Windows Vista keeps restarting after the installation of updates

  How can this be repaired?  I have not activated the system restore.

  This thread has the fix:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9 If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• My Satellite C660-1LD keeps restarting itself

  My Satellite C660-1LD keeps restarting itself. Does anyone know how to stop this?

  Hello

  What exactly happens? Can you please explain what is happening, but more detailed.

• Satellite M40 - 277 keeps restarting - button / stop?

  I have the problem that the (per hour to enter acient) laptop Satellite M40 277 of mine keeps restarting unpredictibally. Initially I have if it was a problem of overheating, so I used SpeedFan and CPU-Burn a test, but the computer does not restart until the airflow to the bottom is fine (I consider that the entry of the fan on the bottom a design error, but it's something else). Now, if the air flow is a bit stuffy, the laptop stops at about 83 and then it will have difficulty to challenge. Ok.

  However when the laptop is about 63C it restarts sometimes and I feel, it can be a power button is stuck. I have XP installation so that it will always ask before you actually stop, and when I pick up the phone on the side (the plastic box where the power button is integrated in waiting) I often question of the judgment. NP, just click away. But I also feel that the button can get stuck and then the system turns off after 5 seconds of 'holding company' the power button.

  So I just tried to get a quick glance and we should normally be able to remove the keyboard, but this M40 is a challenge. Even after that the keyboard is free, I don't see the actual power button.

  Is there anyway to loook under high elegant green rim the power button? How to open this thing up?

  Tom

  Hello

  As far as I know this little switch cover is fixed by 6 latches and connected with small flat cable to the motherboard. It just seems but if you don't know how to remove it you can damage these small latches and later you won't be able to fix the new.

  Anyway, if you think that this power button / troubled maybe just make the switch cover replacement may solve the problem.
  What say about it? Try to get the spare part and ask if anyone can exchange it for you.
  Of course, the best thing is to ask for professional help, but it will cool somewhat.

  Another way, do a risk and try to replace one.
  Let me know what you think of this.

  Good bye

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• U400 cannot start after the initial start of lenovo screen

  Hello
  I got my 400 U since May and it was great before that. I close the lid of my computers to sleep, but I accidentally moved.my wireless mouse. I opened it to put it to sleep again when I was greeted with a screen that I recognize not so I restarted the computer. Now, he can't move before the initial startup screen Lenovo. It says to press fn + f2 to set up or fn + f12 for.multiboot. No command works. The recover button, which brings me to the screen as well. What should I do? PS I have Windows 8 if it's important.

  Worse, he seems to have resolved itself.