Compaq Presarioc V2424NR - BIOS forgot supervisor password

Similar Questions

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• COMPAQ CQ58-300SA: I forgot the password admin or bios for compaq CQ58

  I forgot the administrator password for my setup.my of the bios pc model is compaq cq58-300sa laptop, after I hit a wrong password three times gave me this code 55260654.please help get the password for adiin for my pc.thanks

  Hello

  Please use

  40148290

  Concerning

• Compaq CQ58-230SF: I forgot the password admin or bios for compaq CQ58

  I have a problem with my laptop. I do not remember the password bios compaq cq58-230SF. after heating 3 times enter theres a 63207873 code. Thank you for your help

  Bruno

  Hi, Bruno:

  Enter the unlock code...

  72165275

• Compaq Presario cq58: I forgot the password admin or bios for compaq CQ58

  Hello
  I have a Presario cq58 system off code: 51687058
  Help, please
  Thank you

  @EvilSmith

  Enter 44785098

• Compaq CQ58: I forgot the password admin or bios for compaq CQ58

  I forgot the password admin or bios for compaq CQ58

  my code is 94289323 please help

  @leonaedo

  Enter 21181905

• Compaq CQ10-600: I forgot the bios password

  Hello

  I need help to recover my bios system administrator password.

  When I type 3 passwords wrong, I get a message 'system off [69223859] '.

  Thanks for any help

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy stem...

• Supervisor password and BIOS settings

  When I boot into the bios via esc and F1, it doesn't let me go to all other pages, said the supervisor password is saved but does not prompt you to enter a password for the supervisor to make changes. I updated the bios to 2.0 version, but that didn't make a difference. I need to change the boot order but can not enter to change.

  Someone at - it ideas? How can I force to ask the supervisor password? Or let me go on other pages?

  Thank you

  Hello

  Are you sure you didn't put any user or supervisor password?
  Usually, you can remove it by using the password of Toshiba utility.

  In Toshiba Assist-> Secure, you will find the supervisor password and user password option.

  Remove these passwords in order to obtain full access to the BIOS settings

• Sam S300 - how to get full Supervisor Password Prompt to enter BIOS?

  Have a Satellite PRO S300 (PSSB0A - 06500T), who is with Stop 7B BSOD-ing and I go into the solid part of the BIOS so I can reset the boot order to allow me to re - install Win XP.

  ESC - F1 puts me right in the small part of Page 1 of the ACPI BIOS configuration. I know the supervisor password! So, how do to a password prompt that will allow me in the two pages of the configuration of the BIOS.

  I tried F12 at startup to enter the boot options on the Toshiba splash screen, but it does not work.

  I think you hold a key in the market. Try holding the "INS" key to get the supervisor password to appear prompt.

• Satellite Pro C660-29W: BIOS won't let me enter the supervisor password

  Computer is a satellite pro C660-29W-PSC1ME-00U00KEN

  I put a BIOS supervisor password (no user password is set). I know the password.

  If I hit F2 it penetrates into the text editor, but does not any possibility to enter the password, and while I can see there is no way to change anything.

  Any suggestions?

  If this can be useful?
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

• Re: Portégé R700 - how to reset the BIOS/supervisor password?

  Hi all

  I just bought a used Portege R700 and want to reinstall Windows.
  I can't access the BIOS due to a configuration of PasswordUtility from Toshiba supervisor password. The previous owner did not provide this password.

  How can I reset it?

  Thank you

  Hi Spets

  You cannot reset the BIOS password. It must be done by the Toshiba authorised service provider. I'm sorry.

  If you need addresses and phone numbers, you can find it on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Compaq Mini 110 Bios password?

  Hello

  Compaq Mini 110 Bios password?

  s/n [personal information]

  Hello

  You can try reseating the CMOS/RTC battery on the unit and see if the problem is resolved.

• I forgot the password of BIOS of my satellite M40X-112

  Hello

  I forgot the password to the BIOS of my laptop and I put the laptop so that it requires a password, not only for the opening of the Setup utility, but even to boot. The most annoying is that I stay in Corfu now and I will stay there for another 2.5 weeks. So, I won't be able to use my laptop for the rest of my vacation if there is no solution to remove the password. It is horrible cause I bought primary laptop to have a computer on vacation.

  I recorded my laptop immediately after purchase in line with toshiba. So what can I do to get rid of these password?

  Can send Toshiba my instructions how to remove via e-mail or is it Toshiba Service partner in the weeklies (Greece) where can I get the laptop to in order to get the password removed by the partner?

  Thank you in advance!

  p. a. I am writing an Internet coffee because my laptop is completely useless for the moment

  Hello

  As far as I know you can t change the BIOS password by yourself, because it's a very complicated procedure. To do this you must contact your official service partner Toshiba. They should check, if the device is stolen or not.
  On the Toshiba site, you can find the right service partner.

  Good bye

• Portege R500: Enter the BIOS with supervisor known password

  Hello

  I have just taken delivery of a R500 with installed Xubuntu.

  I need to get into the BIOS to change some settings. I know the supervisor password and I know that normall pressed ESC, then press F1 to enter BIOS. Unfortunately, I don't get the opportunity to enter the supervisor password - it just directly puts me in the "User" settings

  I also have problems to get the F12 boot device settings to work.

  The manual suggests that I use the utility Configuration of Windows to address some of the bIOS settings, however - I am not Windows...

  Any thoughts?

  Weird is... as far as I know you have had installed to access some bios options longer windows.

  The problem is that there is no other software then this utility in windows and the common module that can access the hardwarelayer.

  So, if you want to change something, you need to use windows... :/

  Welcome them

  Tip: you can use another HARD disk where you install Windows. Perhaps a good way to keep ubuntu on HDD

• Where to insert the BIOS on Portege Z830 supervisor password?

  + Number description: +.
  I can access BIOS through F2 on my Z830.
  The installation of the system is listed, but cannot be changed.
  The BIOS supervisor password is set, and I know.
  There is no prompt like ' insert password: "."
  * Please help me find the way how to insert it.*

  (I can also run the system configuration utility.

  There is a prompt "Insert password."
  * If I insert my password it works.*
  But in the utility are some parameters (for example Intel Rapid Start) is missing.)

  BIOS version: 1.8
  8.1 Windows 64-bit

  Post edited by: micko

  Hello

  The password of the BIOS and the supervisor password can be removed in the area of security of BIOS.

  Please also check this Toshiba document.
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

  In some cases, you need to press the "INS" in Toshiba logo appears.
  Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key