Where to insert the BIOS on Portege Z830 supervisor password?

+ Number description: +.
I can access BIOS through F2 on my Z830.
The installation of the system is listed, but cannot be changed.
The BIOS supervisor password is set, and I know.
There is no prompt like ' insert password: "."
* Please help me find the way how to insert it.*

(I can also run the system configuration utility.

There is a prompt "Insert password."
* If I insert my password it works.*
But in the utility are some parameters (for example Intel Rapid Start) is missing.)

BIOS version: 1.8
8.1 Windows 64-bit

Post edited by: micko

Hello

The password of the BIOS and the supervisor password can be removed in the area of security of BIOS.

Please also check this Toshiba document.
http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm

In some cases, you need to press the "INS" in Toshiba logo appears.
Then appears a prompt for the password for the supervisor and if the password is certified then the BIOS could be entered by pressing the "F2" key

Tags: Toshiba

Similar Questions

  • Portege 4000: Where to insert the memory modules live

    I wanted to just extend the memory of my Portege 4000, but I didn t find installed RAM.
    I ve opened all the screws, I found (without opening the whole case), but I didn t find the RAM slots.
    Does anyone know where to insert the RAM?
    Thank you very much
    best wishes from the Austria
    Markus

    Hello

    Module of memory is under the keyboard on the right side near the mouse pad. If you only, please be careful and remove the battery before you begin.

  • Portege M780 - supervisor password asked after sleep

    Hi all

    I think that hadou a bug in the BIOS M780. I put only a password the supervisor of all the 100 - odd machines we have. There are no other security settings enabled and when a computer falls into a deep sleep (ie. after a few hours) they get invited to enter the supervisor password when the awakening of the machine.

    All computers are running the latest version of the BIOS (2.10) and WIndows 7 64-bit. As we are a school we want to prevent children from starting from CD, etc..,.

    I have configured the Security section of the BIOS as follows;

    User password: not registered
    Supervisor password: saved
    HDD1/SSD1 Mode password: < user only >
    HDD user password: not registered
    TPM: disabled >

    Help or confirmation of the issue would be appreciated. See you soon!

    UPDATE: I have since discovered that the problem exists when waking up from hibernation, no sleep. I disbaled it via Group Policy for the management of the "Balanced" diet that has solved my problem now, although this behavior should not yet happen.

  • Portege M400 - where to find the Bios 3.80 changelog

    Hello

    is there a place where I can find the changelog of the version of the bios 1.80 to 3.80? should I upgrade?
    -do you have any experience by changing the fan? mine makes sounds that belong not here...
    -How long in your experience can take to get a response from toshiba support by e-mail? IM waiting 3 days now... :(

    Thank you

    Hello!

    I can t find a log of the changes on the Toshiba site also but why do you want to upgrade the BIOS? In my opinion a BIOS update should only be done if you have problems with your laptop or something else.
    Never touch a running system! ;)

    Before you exchange the fan you need to clean using a jet of compressed air. This could blow the dust from the cooling fans, and you should do from time to time.

    Good bye

  • How to control the fan on Portege Z830?

    I have a Portege Z830 with BIOS version 1.7 and I am very upset by the noise of the fan.
    I was wondering if it is possible to control the fan noise, so I started to experiment with a little utility called SpeedFan. I put in place so that the fan will not turn on until the temperature of the processor exceeds a defined number. But it does not; It seems that the BIOS is ignorant these parameters.

    So my question is how can I set the fan to work my way?

    There are not many options to control the fan.

    The fan is controlled by the BIOS. The fan table that is stored in the BIOS contains information how a cooling module must operate.

    As mentioned by Liam, you can change the settings of power plant of Win 7 more battery as a way to minimize the performance of fans
    This should help a little...

    In other http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65068 thread, I found a neat trick of the last user... He replaced Z830 fan with the fan of Z930 origin...
    It worked.

  • Replacing the battery on Portege Z830 - 10H

    I have a Portege z830 - 10: 00 for a few months. It's battery has already lost 15% of capacity, and I think it is inevitable that the battery will be neet to replace sooner or later.

    You know, if I am able to replace the battery myself (as in the large full notebooks)? Or it can be done only in the service of Toshiba?

    What can be the replacement by Toshiba service cost?

    This Portege a specific design for the battery must be replaced by Toshiba service and persons who are authorized for this work.

    It is not easy to say how much it costs. I don t know where do you live, but the price can be different in different countries in order to better you can do is contact nearest authorized maintainer and look for info on the price.

  • Where to find the Bios for Satellite M100-221 unofficial

    Where can I find the bios unofficial for M100-221? My bios has too few parameters.

    Unofficial BIOS?
    What do you mean with unofficial BIOS? All downloadable versions of BIOS are official versions of BIOS!

    Do you know that the update of the BIOS is a bit risky! Isn't it?
    The incorrect BIOS may cause damage to the motherboard so you want to use a non-official BIOS on you laptop?

    I don t think so

  • Configuration of the BIOS on Portege R705

    I need to set the BIOS to boot from the CD/DVD drive, but, first of all, it does not give me simple choices such as: etc. floppy, hard disk,. Secondly, when I get in the boot priority section, the arrows do not make and the keys f6 or f7 do not do. Please help, need to reset my password. Am completely locked.

    When you start your Portege, press F12 to get into the boot menu. Choose here device CD/DVD and press ENTER.
    It works for you?

  • Satellite Pro M30: Where to find the BIOS for download

    I'm looking for the new version of BIOS to my laptop.
    When I go to driver download site I can see only Satellite Pro M70 downloads but not by Satellite Pro M30.
    Where can I find the version of the BIOS, My F keys do not work and maybe the new version fix it (BTW I use XP SP3)

    Hello

    It seems that all drivers for some older series of laptops have been moved to ARCHIVE.
    So please first select the Archive.
    Then satellite Satellite Pro Pro Satellite Pro M30 M

    There, you can find all the drivers and BIOS.

    BUT NOTE; the update of the Bios will not help you to get the Fn keys work.
    You should first try to reinstall the * common Modules *, then the * utilities Hotkey for display devices *.

    Welcome them

  • How to access the BIOS on Portege M400 configuration?

    Hello

    How to get to the BIOS options, F12 does not help.

    Hello

    What laptop Portege do you mean?

    If the laptop uses Toshiba Bios then try ESC and then F1, but if Phoenix BIOS has been installed on your machine in order to check the F2 option

    PS: on my laptop Toshiba HWsetup has been installed. In this tool, you can make also some modifications in the BIOS directly.

  • How downgrade the BIOS on Portege Z30 - B?

    Hi all

    I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
    There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

    Someone has the original BIOS and knows how to extract?

    Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

    If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

    I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

    How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

    Let me know if you know how to do it.

    Toshiba Portege Z30-B-119 PT253E - 01100XPL
    This European model belongs to the PT253E series

    The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

    The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
    http://support.Toshiba.com/support/v...tentId=4007631

  • Impossible to download the BIOS for Portege Z930 - 404 error

    Hello

    My tool tempro says that there is a new BIOS for my Portege Z930.
    But the link does nothing.

    If anyone can solve this? Or have the correct link

    Thank you
    Markus

    You can use this direct link to download the BIOS file
    [Update BIOS 6.80 - WIN for Portege Z930 | http://support.toshiba-tro.de/tedd-files2/0/bios-20140212101921.zip]

  • How to access the BIOS on Portege ct 3010

    I have a ct Portege 3010.
    When I had, it had Windows 98 installed on it, but I wanted to put Linux on it, so I could learn that.

    So I tried to get into the Bios to boot from my CD but could not get into the Bios or really do anything. Thus, in a final attempt, I reformatted the hard drive.

    Now, I can't not in what either.
    Can anyone help?

    I tried every button I thought me could get into the Bios and even tried to hit all, no one can seem to hit me.

    Hello

    To access the BIOS, you must use and press ESC immediately after that Portege was the power upward.

    But if I understand you right, you want to boot from the internal CD/DVD drive.

    Well, you can also try to press the C key.
    This would allow the start-up of the STRANGE.

    On the other hand, pressing F12 button would you used to activate the start on-screen menu.
    Then, choose the CD/DVD drive to boot from the CD-ROM.

    Check it out

  • Satellite P100: Where to find the BIOS 2.4 to get rid of overheating

    Hi all

    Well well, it is for anyone who has had problems of overheating on the p100 or other such fan disturbances in vista or xp.

    Here is my story:
    I bought a new p100 on seven 6th with Vista preinstalled and I found that I couldn't play because A) there was the problem of "stutter" B) my system overheats protection to stop the automatic to do.

    So I spent a week of research forums and the bowls of the internet trying to find solutions for that.
    The first most liley solution I found was to downgrade to XP, so I did... and that fixed the problems of stuttering during playback of dvd and while palying games!

    However I have had overheating issues (I could only play games like oblivion for 10 minutes then boom).
    The temperature of my system has been peeking at as 75 to 85 degrees, obviously this is not good. So I phoned a support technique toshiba and they told me to take it in an ASP and the look.

    Well, it's a problem for me, because the nearest EPA is 4 hours away by rocket lol jk but it is plan Z.
    So I looked more deeply into the darkest recesses of internet forums...

    AND I THINK I FOUND THE ANSWER!

    However, this requires downgradeing to the BIOS version2.40 who, after a week of research, I have been unable to find! :(

    So my question... my please. Can someone tell me where I can find this particular version of the Bios?

    If you have had similar problems, like that I can post a link to the forum (I've not worn to hand at the moment but I can get it if anyone wants) which I think has the answers but you should have a pretty good understanding of computer systems to try these fixes. I weeded ut who changes the ACPI settings does not work (for my system anyway)

    Any help in locating BIOS v2.4 will be greatly appreciated

    I wish you much luck, but I'm a little pessimistic about finding the old version of the BIOS. Please check this forum a bit better by using the advanced search option. I'm not 100% sure but I think I read the similar topic some time ago. Maybe you can find the user who wrote this version of BIOS. Check her profile here and write on his e-mail address, if any.

  • Where to download the bios?

    Where can I get bios updates? I don't find any bios file in the section support and driver.

    You don't specify what system you are looking for a bios update.

    If you have a S10e, please see this thread.

Maybe you are looking for

  • Impossible to install the Bluetooth software

    Hi all When I tried to install the latest version of the Bluetooth 12.0.0.3600 for my T430s software, the installation will stop at the end with a Chinese error message. I would like to attach a screenshot of the error message, but can't seem to find

  • VCC-24 vs WCR-14

    Users Z3 out there think never having the characteristic Qi Wireless charging with VCC-24 covers convenient Windows? Is there anyone know how to have both? Is WCR-14 capable of being dismentled (without revealing the functionality of loading of Qi) a

  • Inspiron 660

    A second hard drive can be added to my 660?  I want to add Windows 7 on a new hard disk use for professional purposes and leave the other hard drive with Windows 8.1 to use personla.

  • When you select a result oracle of CBR to oracle support site, I get an unauthorized error

    Hi guys,.When I'm looking for a solution in the Oracle Support Portal, I am authorized to open the Knowledge Base search results. But when I opened a community search result, I get an error. The message is in Dutch (I can't find a way to change the l

  • Questions from serial number Adobe Photoshop CS

    I'm trying to configure Photoshop CS for my father with a full installation disc. We used it on a single computer in the past, but it was broken recently; so now, we use a new. The problem is when I put the serial number in, he thinks I'm trying to u