Compare a line in a table with no line

Similar Questions

• Cannot compare a line with other lines in a table... (comparison of many to many)

  Hi all..
  I am very new to PL/SQL...
  I need through through a table to compare its lines with the table with the other lines. For that I'm trying to use Pl/sql below.
  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  create or replace compare()
  Declare
  VAR_HIT CHAR (1);
  SEARCH_RECORD_DATA UDB.table1%ROWTYPE;
  CANDIDATE_RECORD_DATA UDB.table1%ROWTYPE;
  CURSOR SEARCH_RECORDS_CURSOR IS SELECT * FROM UDB.table1 by registration_id;
  CURSOR CANDIDATE_RECORDS_CURSOR IS SELECT * FROM UDB.table1 by registration_id;
  BEGIN
  FOR SEARCH_RECORD_DATA IN SEARCH_RECORDS_CURSOR LOOP
  FOR CANDIDATE_RECORD_DATA IN CANDIDATE_RECORDS_CURSOR LOOP
  IF (CANDIDATE_RECORD_DATA. THE DECISION = 'P') THEN
  VAR_HIT: = 'y ';
  IF (CANDIDATE_RECORD_DATA. First_name! = 'unknown') AND (CANDIDATE_RECORD_DATA. FIRST_NAME! = SEARCH_RECORD_DATA. FIRST_NAME) THEN
  VAR_HIT: = 'n';
  ELSIF (CANDIDATE_RECORD_DATA. Last_name! = 'unknown') AND (CANDIDATE_RECORD_DATA. LAST_NAME! = SEARCH_RECORD_DATA. LAST_NAME) THEN
  VAR_HIT: = 'n';
  ELSIF (CANDIDATE_RECORD_DATA. BIRTH_DATE! = 'unknown') AND (CANDIDATE_RECORD_DATA. BIRTH_DATE! = SEARCH_RECORD_DATA. BIRTH_DATE) THEN
  VAR_HIT: = 'n';
  ELSIF (CANDIDATE_RECORD_DATA. GENDER EQUALITY! = 'U') AND (CANDIDATE_RECORD_DATA. SEX! = SEARCH_RECORD_DATA. SEX) THEN
  VAR_HIT: = 'n';
  ELSIF (CANDIDATE_RECORD_DATA. FATHER_NAME! = 'unknown') AND (CANDIDATE_RECORD_DATA. FATHER_NAME! = SEARCH_RECORD_DATA. FATHER_NAME) THEN
  VAR_HIT: = 'n';
  ELSIF (CANDIDATE_RECORD_DATA. MOTHER_NAME! = 'unknown') AND (CANDIDATE_RECORD_DATA. MOTHER_NAME! = SEARCH_RECORD_DATA. MOTHER_NAME) THEN
  VAR_HIT: = 'n';
  END IF;
  IF(VAR_HIT='y') THEN
  INSERT IN THE UDB. VALUES OF (REGISTRATION_ID, SEARCH_ID, HIT_CANDIDATE_ID, SEARCH_DETAILS, CANDIDATE_DETAILS) BIO_DI_HIT_RESULT (SEARCH_RECORD_DATA. REGISTRATION_ID, SEARCH_RECORD_DATA. EGM_NO, CANDIDATE_RECORD_DATA. EGM_NO, VAR_SEARCH_DETAILS, VAR_CANDIDATE_DETAILS);
  UPDATE UDB. SET BIO_RECORDS_DEMOGRAPHICS = A DECISION ';
  END IF;
  END IF;
  END LOOP;
  commit;
  END LOOP;
  END;
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Outer loop works well (it is raversing throughout the table) is (say by 8000 saves 8,000 times)
  But Enner loop does not work fine e.i. it runs just for 8000 times for 8000 records. While it must run more time then 8000...
  Can someone help me...
  Is the way to use two cursor on a table to compare each line of the report is correct? :(

  >

  But even once come with a problem more in the part of sql, I shared. It does not cover part of my State... :(
  --> If the secondary search field are 'unknown' this field (please AVI single field not as search folder) will not be considered as search criteria.
  But in my current sql, all the side of any field research as "unknown" is not even taken to search for any candidate for other fields match.

  Try to change all the terms in this way (I show here only how to change a condition):

  Instead of:

  AND (SEARCH.BIRTH_DATE!='unknown' AND CANDIDATE.BIRTH_DATE IN (SEARCH.BIRTH_DATE,'unknown'))
  

  Use this one:

  AND (SEARCH.BIRTH_DATE = 'unknown' OR CANDIDATE.BIRTH_DATE IN (SEARCH.BIRTH_DATE,'unknown'))
  

  In the case of the search.birthdate condition will be 'unknown', it will be ignored, otherwise this condition will be used.

• How to compare the length of the data to a staging table with the definition of the base table

  Hello
  I have two tables: staging of the table and the base table.
  I get flatfiles data in the staging of the table, depending on the structure of the requirement of staging of the table and the base table (length of each column in the staging table is 25% more data dump without errors) are different for ex: If we have the city long varchar 40 column in table staging there 25 in the base table. Once data are discharged into the intermediate table that I want to compare the actual length of the data for each column in the staging table with the database table definition (data_length for each column of all_tab_columns) and if no column is different length that I need to update the corresponding line in the intermediate table which also has an indicator called err_length.
  
  so for that I use the cursor c1 is select length (a.id), length (b.SID) of staging_table;
  c2 (name varchar2) cursor is select data_length all_tab_columns where table_name = 'BASE_TABLE' and column_name = name;
  But we get atonce data in the first query while the second slider, I need to get for each column and then compare with the first?
  Can someone tell me how to get the desired results?
  
  Thank you
  Manoi.

  Hey, Marco.

  Of course, you can set src.err_length in the USING clause (where you can reference all_tab_columns) and use this value in the SET clause.
  It is:

  MERGE INTO  staging_table   dst
  USING  (
         WITH     got_lengths     AS
                   (
            SELECT  MAX (CASE WHEN column_name = 'ENAME' THEN data_length END)     AS ename_len
            ,     MAX (CASE WHEN column_name = 'JOB'   THEN data_length END)     AS job_len
            FROM     all_tab_columns
            WHERE     owner          = 'SCOTT'
            AND     table_name     = 'EMP'
            )
       SELECT     s.ename
       ,     s.job
       ,     CASE WHEN LENGTH (s.ename) > l.ename_len THEN 'ENAME ' END     ||
            CASE WHEN LENGTH (s.job)   > l.job_len   THEN 'JOB '   END     AS err_length
       FROM     staging_table     s
       JOIN     got_lengths     l     ON     LENGTH (s.ename)     > l.ename_len
                           OR     LENGTH (s.job)          > l.job_len
       )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  As you can see, you have to hardcode the names of the columns common to several places. I swam () to simplify that, but I found an interesting (at least for me) alternative grouping function involving the STRAGG user_defined.
  As you can see, only the subquery USING is changed.

  MERGE INTO  staging_table   dst
  USING  (
         SELECT       s.ename
         ,       s.job
         ,       STRAGG (l.column_name)     AS err_length
         FROM       staging_table          s
         JOIN       all_tab_columns     l
        ON       l.data_length  < LENGTH ( CASE  l.column_name
                                            WHEN  'ENAME'
                                  THEN      ename
                                  WHEN  'JOB'
                                  THEN      job
                                     END
                             )
         WHERE     l.owner      = 'SCOTT'
         AND      l.table_name     = 'EMP'
         AND      l.data_type     = 'VARCHAR2'
         GROUP BY      s.ename
         ,           s.job
         )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  Instead of the user-defined STRAGG (that you can copy from AskTom), you can also use the undocumented, or from Oracle 11.2, WM_CONCAT LISTAGG built-in function.

• 5.6.1 pages: How to create a table with more than 999 lines?

  5.6.1 pages: How to create a table with more than 999 lines?

  The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

• Fill the table with the formula nodewith a line of code

  Hello

  This is my first post of the community, OR maybe this question has been asked 1000 times but I could find no answer.

  Before using LabView I used Matlab a lot. I find a bit that it's too complicated without reason sometimes in labview work with arrays.

  I inherited, and I'm doing a little cleaning. what it does is extractr 2 and 3 position and creates a new table with her and another oner with other elements of the first table. In my view, that he becomes confused because you should rely on the cell of the table, the position of the output and I didn't wat to work this way.

  

  I replaced it with a knot of formula. Here is the code

  The departure is FP, the table of 6 elements is mdot and the 2 elements array is press

  MDOT float64 [6], press [2];

  MDOT [0] = FP [0]; MDOT [1] = FP [1];
  MDOT [2] = FP [4]; MDOT [3] = PS [5];
  MDOT [4] = PS [6]; MDOT [5] = FP [7];

  Press [0] = PS [2], press [1] = PS [3];

  Now, I want to know if it is possible to do as I would in matlab or C, where you can create a table with one line of code. What would the syntax in formula node to do something like:

  MDOT [6] = [FP [0], FP [1], [4] of FP, FP [5], FP [6], FP [7]];

  Press [2] = [FP [2], FP [3]];

  Thank you

  Use remove the table.  You can provide an index and length of elements to remove.  One of the outputs will be the original with the subset of the deleted table and the other output is the subset deleted.  1 NŒUD!

  EDIT: Created a snippet just after my previous post.

  

• Remove a line of table with a button in Livecycle Designer SS3

  I have a table in Livecycle which includes 16 static lines. Several lines can be added or removed dynamically at the end of the table.

  I want the user to be able to remove one of the static lines if they want to however I can't get the script to work.

  I have a button at the end of the line with the script:

  driverTable._Row2.removeInstance (true);

  I tried various forms of this script such as do not use the abbreviation for 'instanceManager', leaving 'real' outside, etc. Where it says 'Row2' I would like to use this script for the following lines, Row3, etc. Row4.

  I tried with the initial counter value of 1 and tried to zero. The table is in a fluid subform.

  Can anyone help?

  Hello

  A line cannot be set to 0 cases, if you want to remove a line, you need to hide by using its property of presence...

  But if you use 1 table for 16 different ranks, why don't you set the table with dynamic lines and have an initial 16 meter, then you can delete the lines you want with the removeInstance method

• How to create a table with lines in a line?

  Hello

  I am trying to create a table that looks like this: https://Acrobat.com/#d=XyI3rlSWMWYXQixzpRSrXA but I can't understand.

  Please can someone tell how should I go about this?

  Thanks for the help.

  Hello

  We see you the nested tables, you must create a table within a table. For this first you must merge the lines and insert a table with the number of rows requested. You can find the example created for you below and let me know in case of any problems

  https://SendNow.Acrobat.com/m/g.ashx?i=rO1m-dIDzRs2FibTHDSiww&x=yrC * o4IZIVfpKgqOTbX8OQ

  Thank you

• How to create a table with no lines to the left or to the right?

  If I create a table with say 5 columns and 15 lines, how not to do a vertical line (border) to the left and to the right of the table while keeping the boundary up and down? Is that possible or I just put a white box on the left and the right?

  IDCS3

  There are a few methods that work. Here is one.

  (1) select your table cells

  (2) open the race Panel

  3) click the blue lines of the proxy image in the Panel of stoke to deselect the lines inside and high and low lines

  (4) 0 the value of the weight of the race (or change the color of the None swatch)

  

  Oh and for the love of your fellow designers or the person that allows you to edit your work in the future... do NOT use a white box to hide the traits of lines and columns in the table.

  HTH

  -mt

• Add a table with the number of lines and columns JS

  Hello

  Simple question: what is the syntax for adding a table with a specified number of rows and columns? I don't get it. (I don't know how to add them later, but I want to do when I create the table). Here is the entry in the ESTK:

  Tables.Add (to: LocationOptions, reference: all, withProperties: Object): array

  Creates a new table.

  (optional): Data Type: LocationOptions, by default: LocationOptions.UNKNOWN
  The location of the new table to the object within the container object or reference. (Optional)

  Reference: Data Type: no
  The reference object. Note: Required when the value specifies before or after. Can accept: Table, XmlStory, XMLElement, TextFrame, text, character, Word, line, paragraph, TextColumn, PointInsertion, story, cell or TextStyleRange. (Optional)

  withProperties: Data Type: object
  Initial values for the properties of the new Table (optional)

  Thank you

  Ariel

  After much experimentation, I found this works:

  t = app.selection [0].tables.add (LocationOptions.AT_BEGINNING, undefined, {columnCount:2, headerRowCount:1, bodyRowCount:5, footerRowCount:3});})

• Need to create a new line in the table with the same data as the primary key, but new PK

  Hello gurus,
  
  I have a table with a column as a primary key, I need to create a new row in the table, but with the same data in one of the lines, but with different primary keys, focus a double row with key primary diferent...
  
  Any ideas of how it can be done without much complication?
  
  Thanks in advance for your answer.
  
  Agress,
  Karim idrissi

  user9970447 wrote:
  Hello gurus,

  I have a table with a column as a primary key, I need to create a new row in the table, but with the same data in one of the lines, but with different primary keys, focus a double row with key primary diferent...

  Any ideas of how it can be done without much complication?

  Thanks in advance for your answer.

  Agress,
  Karim idrissi

  something like

  insert into mytable values ('literal for new pk',
                                         select non-pk-1,
                                                  non-pk-2,
                                                  non-pk-n
                                         from mytable
                                         where pk-col = 'literal for existing pk')
  

• Line selection/highlight / copy of af: table with rowselection in IE

  I have a table with a row selection listener to drill as much information on this line. In order for that to work, I need to set the rowselection attribute. However, when that is defined, in IE8, users are not able to select or highlight any text in the array to copy and paste this information. It works fine in Firefox.
  Has anyone encountered this problem or found a resolution for it?
  Thank you
  A

  Hello

  I have also faced similar problem and overcame by using with readonly true instead of outputText

  Mohan

• by comparing the two tables with

  With the help of 10 gr 2
  
  Assuming that we have two tables with the following structure:
  create table1 (integer id, amount1 number, status varchar2 (200));
  create table2 (integer id, number, status varchar2 amount2 (200));
  
  Table1 contains a single line:
  ID = 4711, amount1 = 3, status = "not ok".
  
  Table2 contains one or more lines with table2.id = table1.my_field referenced:
  ID = 4711, amount2 = 2, status = "not ok".
  ID = 4711, amount2 = 2, status = "not ok".
  ID = 4711, amount2 = 1, status = "not ok".
  ID = 4711, amount2 = 4, status = "not ok".
  
  The amount1 in Table1 is a cumulative sum of Table2 lines what status should be set to "ok". Table1.my_field is particularly well indexed.
  
  How to make all the lines (for example via the rowid) from Table2 that sum on amount2 is the amount1 in the line after line in Table1 (for switching their table2.status to 'ok')?
  I hope my question is clear enough...

  Try this

   SQL> select * from table2;
  
          ID    AMOUNT2 STATUS
  ---------- ---------- ------
        4711          2 Ok
        4711          2 not ok
        4711          1 Ok
        4711          4 not ok
  
  SQL> roll
  Rollback complete.
  SQL> select * from table1;
  
          ID    AMOUNT1 STATUS
  ---------- ---------- ------
        4711          3 not ok
  
  SQL> select * from table2;
  
          ID    AMOUNT2 STATUS
  ---------- ---------- ------
        4711          2 not ok
        4711          2 not ok
        4711          1 not ok
        4711          4 not ok
  
  SQL>
  SQL>
  SQL> update
    2     table2 a
    3  set
    4     a.status = 'Ok'
    5  where
    6     rowid in
    7       (select t2.rowid
    8       from
    9             (select
   10                     table2.*,
   11                     sum(amount2) over (partition by id order by rn) rn_total
   12             from
   13                     (select table2.*, row_number() over (partition by id order by amount2) rn from  table2 ) table2)  t2,
   14             table1
   15        where
   16             table1.id = t2.id and
   17             t2.rn_total <= table1.amount1)
   18  /
  
  2 rows updated.
  
  SQL> select * from table2;
  
          ID    AMOUNT2 STATUS
  ---------- ---------- ------
        4711          2 Ok
        4711          2 not ok
        4711          1 Ok
        4711          4 not ok
  
  SQL>
  

• How to compare two lines in PL/SQL?

  Hi all
  
  How to compare two lines in PL/SQL? Is there a method I can use to compare their column by column instead?
  
  Any comments would be much appreciated.

  PhoenixBai wrote:
  By lines I mean, two rows of the same table!

  Ah, finally, we get a bit more useful information

  and I need to compare the column by column to see if there is a difference between these two rows.

  Like this, you mean?

  SQL> ed
  Wrote file afiedt.buf
  
    1  with data as (select 1 as id, 'A' as dta, 'B' as dta2 from dual union all
    2                select 2, 'A', 'B' from dual union all
    3                select 3, 'B', 'C' from dual)
    4  --
    5      ,chk as (select &id1 as id1, &id2 as id2 from dual)
    6  --
    7  select case when (
    8    select count(*)
    9    from (
   10      select dta, dta2
   11      from data, chk
   12      where id = id1
   13      minus
   14      select dta, dta2
   15      from data, chk
   16      where id = id2
   17      )
   18    ) = 0 then 'No Difference'
   19          else 'Difference'
   20          end as check_result
   21* from dual
  SQL> /
  Enter value for id1: 1
  Enter value for id2: 2
  old   5:     ,chk as (select &id1 as id1, &id2 as id2 from dual)
  new   5:     ,chk as (select 1 as id1, 2 as id2 from dual)
  
  CHECK_RESULT
  -------------
  No Difference
  
  SQL> /
  Enter value for id1: 1
  Enter value for id2: 3
  old   5:     ,chk as (select &id1 as id1, &id2 as id2 from dual)
  new   5:     ,chk as (select 1 as id1, 3 as id2 from dual)
  
  CHECK_RESULT
  -------------
  Difference
  
  SQL>
  

  My only concern is the result of this sql. East - reliable? It can really be used to differentiate the two lines? I mean, the result would be the same, as I do with Java?

  Not sure what you mean by "reliable"? SQL is not some kind of generator of random result (by derogation from the use of the DBMS_RANDOM package). If you ask him if 1 + 1 = 2, then it will always give you the right answer.

• Comparison of table with a threshold

  Hello

  I want to compare a table with a threshold value and then draw the table values that are above the threshold.

  Thanks in advance

  Best regards

  RASHID

  Hi rachid,.

  For normal comparison with thresholds, you must make use of one for indexing of each elements and comparison functions and structure of matter...

  For your idea, I just add code examples.

  Thank you and best regards,

  srikrishnaNF

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• AF:table with Pagination. How to get to the specific page?

  Hi all!

  I use jDev 12.1.3

  I have the following case, based on the Employees of HR schema table.

  In a stubborn workflow, I have 2 pages.

  The 1^era page has a read-only table with the employees. The peculiarity is that the instance of the opinion of the employees is tuned with Page Ranging (lazy employees is a huge table).

  Af: table has autoHeightRows = "15" scrollPolicy = 'page' and the iterator has RangeSize = 15.

  By clicking on a button, the user goes to the second page, where the selected record should be changed (with the help of the SetCurrentRowWithKey method). Then, the user wants to go back to the first page.

  The question starts here.

  Assume that the user is on the page with the table and wants to change an employee who is on the page of the 3^rd (paging) of the table. After the change of registration, the user wants to return back to the page 'table', but not on the first page (of the paging), but 3^rd page.

  So, how I put the current page and the return line to the initial selection of the user?

  I ' tried scrollToRangePage() but nothing seems to happen.

  Thank you very much

  ~ Apostolos

  You can do it if you save the page the row is turned on, or the beginning of the beach page. Her edit you the line and after you have finished editing, you set the rear range.

  To set a table on a specific page, you use a RangeChangeEvent where you specify the table, oldstart, oldend, newstat index values and newend.

  Before you begin to modify or end edit, you can calculate the values of the iterator. Something like

  {} public void onGotoPage (ActionEvent actionEvent)

  BindingContainer bindingContainer is BindingContext.getCurrent () .getCurrentBindingsEntry ();.

  get the number of page to goto

  AttributeBinding attr = bindingContainer.getControlBinding("gotopage1") (AttributeBinding);

  Entire NewPage = (Integer) attr.getInputValue ();

  If (newPage == null) {}

  return;

  }

  first page starts at index 0 so subtract 1 from the number of page

  -newPage;

  DCIteratorBinding iter = bindingContainer.get("EmployeesView1Iterator") (DCIteratorBinding);

  calculate the old and new rage for the RangeChangeEvent

  range int = iter.getRangeSize (); Note both the table and we take the RangeSize of the iterator page size

  int oldStart = iter.getRangeStart ();

  int oldEnd = oldStart + Beach;

  Newstat int newPage = * rank;

  int newEnd = Newstat + range;

  Find the table

  UIViewRoot iViewRoot is FacesContext.getCurrentInstance () .getViewRoot ();.

  UIComponent table = iViewRoot.findComponent("t1");

  create the event and fire

  Event RangeChangeEvent = new RangeChangeEvent (table, oldStart, oldEnd, Newstat, newEnd);

  table. Broadcast (Event);

  Update table

  AdfFacesContext.getCurrentInstance () .addPartialTarget (table);

  }

  I've marked the essential parts "BOLD".

  Timo