Cannot compare a line with other lines in a table... (comparison of many to many)

Similar Questions

• Compare the Collection with the help of the Table less

  Hey there!

  my plan is to transfer an excel file and record in an apex_collection, compare the results with those that already exist in a specific table and write it in another temporary table.

  Import excel, in the collection works perfectly, but I fight with the comparation. I select the form of entries collection and using UNMIS to compare lines with those of another SELECTION that gets the lines of the existing table.

  DECLARE

  BEGIN

  INSERT INTO UPLOADED_DID_LIST_COMP (BAC_CODE, UPSC)

  (

  SELECT BAC_CODE c001

  c002 published

  From apex_collections ca

  WHERE collection_name = "UPLOADED_EXCEL."

  LESS

  SELECT

  BAC_CODE

  EDITED

  OF UPLOADED_DID_LIST upld, apex_collections c WHERE

  collection_name = "UPLOADED_EXCEL."

  AND the upld. BAC_CODE = c.C001

  AND the upld. LʼUPSC = c.C002

  );

  End;

  This does not work because of this error:

  ORA-00933: SQL command not properly ended ORA-06550

  PLS-00103: encountered the symbol "end-of-file" when awaits one of the following numbers: (begin case declare exit end exception for goto rise back loop mod null pragma select update while < ID > < a quot double)

  If it's a copy/paste of your exact code then you just need to fix it, spaces here and there. And remove the superfluous where clause. Maybe:

  BEGIN

  INSERT

  IN UPLOADED_DID_LIST_COMP

  (

  BAC_CODE, SCHOOLING

  )

  (

  C001 SELECT BAC_CODE, EDITED C002

  FROM APEX_COLLECTIONS CA

  WHERE COLLECTION_NAME = "UPLOADED_EXCEL."

  LESS

  SELECT BAC_CODE, SCHOOLING

  OF UPLOADED_DID_LIST UPLD

  );

  END;

  Good luck.

• Compare a line in a table with no line

  How can I compare jspx, the actual line with the prevoius in a page?
  
  Thank you very much.

  all with an EL expression if possible.

  It is not - there is no EL for "the previous row.

  John

• Cannot close the first with other (LH one end) tab open are closed.

  Cannot close the first tab (end of LH we) but others are closing. Indicator download on tab keeps indefinitely - running windows under all the tabs are functioning normally.
  Open another copy of Firefox allows all tabs to work normally in this copy

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

• Volume adjusts at random. Cannot control the volume with other software, ie iTunes.

  I have a HP Pavilion dv7-7000 Quad. The music playback volume goes up and down. Also, I can't control the volume in itunes or winamp. If I turn the volume in itunes there for a while, but back down. When I turn the volume to 1% in itunes, it says there for a few seconds and it slowly rises to the top.

  I tried a lot of things trying to get this problem resolved and spent over 2 hours with HP tech rep:

  1 uninstall the audio driver, restart, install the driver.

  2 bios flash

  3 reinstall the sound driver using HP Recovery Manager

  4 Windows repair.

  5 Chkdsk

  The only thing that worked was

  Uninstalled the audio driver in Device Manager and is looking for new devices and installed windows automaticlly refreshment and it fixed the issue... * beep *? I had my helmet in the decision-making when the driver installed.

  I'm afraid to turn my computer off now.

• Cannot select DataGrid lines

  Hello and thanks in advance
  I'm completely stumped on this one.
  I do not search the forums, but I couldn't find the same problem.
  
  Using Flex Builder 2.0.1
  Mac 10.5.1
  AMFPHP
  
  I built two components each with its own datagrid
  the first I can scroll and select lines without problem:
  
  < mx:VBox id = 'adminhome' top = "0" right = "0" left = "0" horizontalAlign = "left" verticalAlign = "top" low "0" = >
  < mx:HBox id = "WorkhistoryNav" width = "100%".
  backgroundColor = "#43738b" color = "#ffffff" backgroundAlpha = "1.0" height = "23".
  horizontalAlign = "left" >
  < mx:LinkBar
  ID = "adminNav".
  horizontalCenter = rollOverColor "14" = "#ABABAB."
  itemClick = "changeAdminView (event)" width = "100%" height = "23" > "
  < mx:dataProvider >
  Add New Member < mx:String > < / mx:String >
  < mx:String > delete < / mx:String >
  < mx:String > Member suspends < / mx:String >
  < / mx:dataProvider >
  < / mx:LinkBar >
  < / mx:HBox >
  < mx:DataGrid id = "user_grid".
  dataProvider = "{user_dp}".
  Selectable = "true" selectedIndex = "0".
  right = "0" top = low '25' = '0 '.
  left = '0 '.
  Width = "100%" height = "100%" >
  < mx:columns >
  < mx:DataGridColumn headerText = "first name".
  dataField = "first name" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Last Name" dataField = "lastname" textAlign = "left" / >
  < mx:DataGridColumn headerText = "User name" dataField = "usr_login" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Password" dataField = "password" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Phone" dataField = "phone" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Email" dataField = "email" textAlign = "left" / >
  < / mx:columns >
  < / mx:DataGrid >
  
  < / mx:VBox >
  
  Cannot select a line, but the last on this one?
  
  < mx:DataGrid id = "grd_workHistory".
  dataProvider = "{wrkHistory_dp}".
  selectable = "true" selectedIndex = "0" right = "0" top = low "25" = "0" left = "0" >
  < mx:columns >
  < mx:DataGridColumn headerText = "" dataField = "from" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Α" dataField = "α" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Company" dataField = "company" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Position" dataField = "position" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Supervisor" dataField = "Manager" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Title of supervisor" dataField = "mngrtitle" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Telephone supervisor" dataField = "mngrphone" textAlign = "left" / >
  < mx:DataGridColumn headerText = "starting salary" dataField = "startsalary" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Late pay" dataField = "endsalary" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Responsibilities" dataField = "responsibilities" textAlign = "left" / >
  < mx:DataGridColumn headerText = "Reason for leaving" dataField = "reason" textAlign = "left" / >
  < / mx:columns >
  < / mx:DataGrid >
  
  I hope you see something I don't have
  
  Thank you
  
  Keith

  Sorry, developer error.
  I have been collecting data in a table unordered items in my php and datagrid expected to be ordered.

  Answer: instead of forming your query in the form
  SELECT * from table1;
  It should be:
  SELECT col1, col2, col3 from table1;

• How to compare two lines in PL/SQL?

  Hi all
  
  How to compare two lines in PL/SQL? Is there a method I can use to compare their column by column instead?
  
  Any comments would be much appreciated.

  PhoenixBai wrote:
  By lines I mean, two rows of the same table!

  Ah, finally, we get a bit more useful information

  and I need to compare the column by column to see if there is a difference between these two rows.

  Like this, you mean?

  SQL> ed
  Wrote file afiedt.buf
  
    1  with data as (select 1 as id, 'A' as dta, 'B' as dta2 from dual union all
    2                select 2, 'A', 'B' from dual union all
    3                select 3, 'B', 'C' from dual)
    4  --
    5      ,chk as (select &id1 as id1, &id2 as id2 from dual)
    6  --
    7  select case when (
    8    select count(*)
    9    from (
   10      select dta, dta2
   11      from data, chk
   12      where id = id1
   13      minus
   14      select dta, dta2
   15      from data, chk
   16      where id = id2
   17      )
   18    ) = 0 then 'No Difference'
   19          else 'Difference'
   20          end as check_result
   21* from dual
  SQL> /
  Enter value for id1: 1
  Enter value for id2: 2
  old   5:     ,chk as (select &id1 as id1, &id2 as id2 from dual)
  new   5:     ,chk as (select 1 as id1, 2 as id2 from dual)
  
  CHECK_RESULT
  -------------
  No Difference
  
  SQL> /
  Enter value for id1: 1
  Enter value for id2: 3
  old   5:     ,chk as (select &id1 as id1, &id2 as id2 from dual)
  new   5:     ,chk as (select 1 as id1, 3 as id2 from dual)
  
  CHECK_RESULT
  -------------
  Difference
  
  SQL>
  

  My only concern is the result of this sql. East - reliable? It can really be used to differentiate the two lines? I mean, the result would be the same, as I do with Java?

  Not sure what you mean by "reliable"? SQL is not some kind of generator of random result (by derogation from the use of the DBMS_RANDOM package). If you ask him if 1 + 1 = 2, then it will always give you the right answer.

• Creation of nested with the Out-Of-Line storage option table

  Hi all
  
  I want to know the ability to adjust the table as out-of-line.
  
  Normal table creation is like this:

  CREATE TABLE BID_XML( BID_INSERT_STAMP DATE) ;
  
  ALTER TABLE BID_XML
  ADD( GLE XMLType) XMLType column GLE STORE AS OBJECT RELATIONAL
  XMLSCHEMA "http://www.schemas.th.com/IntBID03" ELEMENT "IntegrationBID"
  VARRAY GLE."XMLDATA"."Organization"."OfficerInformation"."Officer" STORE AS TABLE officers_tab;

  But we cannot access table officers_tab directly, so I want to define officers_tab as out-of-line? How can I do this?
  
  -Yasser

  Hi Yasser,

  Indeed, you can't do

  SELECT * FROM officers_tab;
  

  but you can question her via the SCOREBOARD operator:

  SELECT t.bid_insert_stamp,
         x.*
  FROM bid_xml t,
       TABLE(t.gle.xmldata."Organization"."OfficerInformation"."Officer") x;
  

  Isn't that enough?

• I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

  Original title: deleted Ethernet adapter

  Hello

  All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
  I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
  First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
  I tried to insert Dell drivers and utilities disk, but that does not change.
  I tried to download on an other computer files from dell that look like they are pilots.
  I tried to set up a new connection
  None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
  Thank you
  Kevin

  Hello

  1. what you're trying to fix by running registry cleaners?
  2. How did you remove Ethernet card?
  3. How are you online using other devices?
  4. What are the devices are?

  Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot see/Run JCarousel with FireFox

  Cannot see/run JCarousel with Firefox.

  I am able to see the main image and the images over the primary image line; but the javascript code which changes at each successive image does not work.

  I can't run any JCarousel with FireFox. National Geographic is just one example of the most recent which does not work.

  You have quite a few extensions you installed that can cause problems like that (Adblock Plus, Ghostery).

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot read a dvd with windows media player

  Cannot play dvd's with windows media player or media Center, am running windows 7 Home premium 64 bit on a new machine. Have installed the codecs, but no luck, have the wristmaster great samsung that uses the latest windows drivers. I can listen to music and view photos

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  System manufacturer: MICRO-STAR INTERNATIONAL CO., LTD.
  System model: MS-7529
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 Quad CPU Q8200 2.33 GHz (4 CPUs), ~2.3GHz
  Memory: 4096 MB RAM
  Available OS memory: 4096 MB RAM
  Page file: 1364MB used, 6824 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode
  DxDiag previously: crashed in the information system (step 4). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  --------------------
  DirectX Debug levels
  --------------------
  Direct3D: 0/4 (detail)
  DirectDraw: 0/4 (detail)
  DirectInput: 0/5 (retail)
  DirectMusic: 0/5 (retail)
  DirectPlay: 0/9 (detail)
  DirectSound: 0/5 (retail)
  DirectShow: 0/6 (detail)

  ---------------
  Display devices
  ---------------
  Card name: NVIDIA GeForce 8500 GT
  Manufacturer: NVIDIA
  Track type: GeForce 8500 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0421 & SUBSYS_047B10DE & REV_A1
  Memory display: 2797 MB
  Dedicated memory: 1005 MB
  Shared memory: 1791 MB
  Current mode: 1680 x 1050 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: W2242
  Monitor ID: GSM5677
  Native mode: 1680 x 1050 (p) (59,883 Hz)
  Output type: HD15
  Driver name: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
  The driver file version: 8.17.0011.9562 (English)
  Driver version: 8.17.11.9562
  DDI version: 10
  : Model WDDM 1.1 driver
  Driver attributes: Final retail
  Driver Date/size: 11-21-2009 04:34:54, 11775080 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B71E3E-4761-11CF-3456-70241FC2C535}
  Vendor ID: 0x10DE
  Device ID: 0 x 0421
  SubSys ID: 0x047B10DE
  Revision ID: 0x00A1
  Strong name of the driver: oem2.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section009:8.17.11.9562:pci\ven_10de&dev_0421
  The driver rating: 00E62001
  Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
  Deinterlace caps: {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  D3d9 Overlay: support
  DXVA-HD: support
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Could you please answer these money questions?

  (a) could you tell us what happens when you play the dvd?

  (b) how do you try to play the dvd?

  (c) you receive an error message?

  (d) do you have the latest changes the software on your computer?

  (e) have you tried the dvd in another computer?

  Please get back to us with answers, so that we will be in a better position on this issue.

  However, if you want to solve this problem, you can follow the link below to run the troubleshooter to Open the troubleshooting Windows Media Player DVD Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Thank you, and in what concerns:

  I. Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• How to align subregions, with other primary areas

  I use Apex 5.0.2 and I have a relationship with the 4 main regions of the html and 2 html under regions. The image what it looks like now can be found below:

  Subregion of L and R sub-region is under a parent called area 2(which is a region with no title).

  The purpose of having the Subregion L and R subregion is because they must be presented side-by-side.

  My problems is that L subregion is shifted to the right in a way and I tried to play with the Column Atrributes and attributes of the region , but it doesn't seem to work.

  How do L subregion in line with other major regions? Thank you!

  It depends on the theme you are using (it does not resemble universal theme). Use a toolbar developer to look at the CSS used for the subregion. For example, in a universal theme, it's the CSS that adds the padding:

  

  There are several ways to change this. If it's just for this page, you can add CSS inline to the page:

  

  This will change this:

  

  to do this:

  

• How to get rownum of the last line in a table?

  Hello

  I need to add a line slot-shaped table with the dynamic value.

  I add a line slot-shaped table with existing lines so I need to get a rownum of the last row of tabular presentation.

  I'm using a process like this:

  Declare

  l_value varchar2 (200);

  number of rownum_value;

  Begin

  l_value: = wwv_flow.g_x01;

  rownum_value : = wwv_flow.g_x02;

  HTP.p ("< class td =" child"> ');

  HTP.p (APEX_ITEM. DISPLAY_AND_SAVE (p_idx = > 3,

  p_value = > l_value,

  p_item_id = > 'f03_000 ' | ROWNUM_VALUE - here is Rownum value

  ));

  HTP.p ("< table > '");

  HTP.p ("< class td =" child"> ');

  HTP.p (to_date (sysdate));

  HTP.p ("< table > '");

  HTP.p ("< class td =" child"> ');

  HTP.p (APEX_ITEM. CHECKBOX2 (p_idx = > 5, p_value = > 'Y', p_item_id = > 'f05_000' |) ROWNUM_VALUE -here is Rownum value
  

                           ));

  HTP.p ("< table > '");

  And I use the dynamic action with Ajax to pass values to the process:

  (function () {}

  get var = new htmldb_Get (null, $v ('pFlowId'), 'APPLICATION_PROCESS is ADD_VALUE', $v ('pFlowStepId'));

  get.addParam ('x 01', $v ('P2_VALUE'));

  get.addParam ('x 02',SOME_ROWNUM_VALUE);  Here, I need to get the value of Rownum

  gReturn = get.get ();

  get = null;

  gReturn = (! gReturn)? ' null': gReturn;

  var table1 = document.getElementById ('tabform_TABLE');

  Table2 = table1.getElementsByClassName ("uReport") var [0];

  TBODY var = table2.tBodies [0];

  var row = document.createElement ("TR");

  row.innerHTML = gReturn;

  tbody.appendChild (row);

  })();

  How can I get a value of rownum in the last row of my tabular form?

  I prefer to use JavaScript, but any other solution would be much appreciated.

  I'm on Apex 4.2

  Thanks to you all.

  There are a few options

  Base Oracle: Number count of rows returned in the report of the APEX

  for example:

  $('#report_emp td[headers="ENAME"]').length

• Inference of object with other objects or alignment Center page.

  Is someone can you please tell me how I throw inference guides that highlight when I move an object on the page are centered vertically or horizontally, or in line with other objects. I mean, I want to be able to move objects such as spaces for images and text around frames on my pages and have the alignment guides appear when objects are centered page or in accordance with other objects. It seemed to work when I started experimenting InDesign, but seems to have stopped working in the last day or two, probably because of something I did!

  Little assistance of love!

  Scotty

  I think you want to say "bearings commented. You can adjust in the InDesign preferences. Here is the tutorial of Sandee Cohen on them: http://creativepro.com/align-and-space-objects-indesigns-smart-guides/