Comparing in el expression

Or use two techniques, I showed you. It is really not difficult...

Oh, wait, forgotten JSTL - the function is already written for you...

Add functions to your project JSTL tag library,

xmlns:fn="http://java.sun.com/jsp/jstl/functions"

in the jsp:root, then:

Voila
 
         
 
         
 more
 
		 
 Tags: Java
 
         
         
 
          
Similar Questions
 
          
 
            
           
 
		     
Windows live mail used compared to outlook express
 
			 
I prefer windows live mail. How can I remove the outlook express program that keeps popping up from time to time?
			 
Hi Bobwisda,
Thanks for posting. To remove Outlook Express, follow these steps. Please note that you will need the Windows XP CD to reinstall this component.
Click Start
Click on Control Panel
Double-click Add / Remove programs
Once the icon Add / Remove programs is open, click the Add/Remove Windows components on the left side of the screen.
You should see that outlook Express is listed when the dialog box opens.
Just remove the check mark from the box next to Outlook Express and click on "next".
You will see a progress bar as Outlook Express is being uninstalled, and when it's done, you can simply click Finish.
Outlook Express has been removed.
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
		   
 
            
           
 
		     
Sansa clip 1 GB snap-crackle-pop of sound effects.
 
			 
I bought this in aid of rite few days for the purpose of recording music on the radio.  I am owner of a 1 GB sansa express, so I it would be "safe" to buy a clip as well.  I am now regretting that decision.  During the reading of the radio, there is a crackling sound whenever someone says or sings a Word with an s in it.  This isn't radio static, because there is no cracking during periods of calm.  In any case, it's just bad FM reception compared to the express.  I can put them side by side and the express Gets a clear reception and it won't often. I just updated the firmware a few minutes ago, but I don't expect it is a help.  Are there opportunities that I can get a refund of sansa?  If so, I can go and buy the equivalent of rca at Walmart. And the loser mini requires instead of a male USB taken standard is quite annoying. Overall, I am very disappointed by that.
			 
Given that the microphone is located in such immediate proximity to the headphone jack, I would say yes, he could probably.
		   
 
            
           
 
		     
SQL Query Help (not working not properly)
 
			 
Hello everyone,
I use JDeveloper 12.1.2.0.0. I do a two-way communication using 3 tables, with links between them (and using schema HR).
In my example, I have something like:
Departments, employees, and the SalaryByJobs (I created this table where it shows a departmentd id, employee id, salary).
Whenever I click on one OR more departments, the employees up-to-date table by putting on the table, employees who belong to the selected department and the salaryByjob to put the jobs of the employees selected on the employees table.
So it's something like this:
The departments selected-> employees selected-> salarybyjbobs of these employees.
My query used (in the view) has the following code:
SELECT Employees.COMMISSION_PCT,
Employees.DEPARTMENT_ID,
Employees.EMAIL,
Employees.EMPLOYEE_ID,
Employees.FIRST_NAME,
Employees.HIRE_DATE,
Employees.JOB_ID,
Employees.LAST_NAME,
Employees.MANAGER_ID,
Employees.PHONE_NUMBER,
Employees.SALARY
Employees EMPLOYEES
WHERE (department_id IN (select * from THE (select cast (in_list(:variavel3) as mytableType) double) a))
Since I use the links, the employees table does not show anything at the beginning, so I added this to my query used to go: OR nvl(:variavel3,0) = 0
But now, whenever I try to select multiple lines, it gives me the invalid numbers and I don't understand why...
It's only one line of code and it is not in the bean.
Can someone help me?
PS - The bean will Department by Department, adds the departments with ',' and for each Department, gets employees who belongs to them.
My best regards,
Frederico Barracha.
			 
The expression NVL (: variavel3, 0) = 0 is not correct. The data type of the return value of the NVL function is considered to be equal to the data type of the argument of 1 (that is, the data type of the variable binding: variavel3). You said that this variable contained a list separated by commas to ID, so the data type of the variable is VARCHAR2. As long as you compare the NVL expression of a number, you get 'Invalid number' exception, because Oracle expects a numeric data type on the left side of the comparison operator.
To avoid the exception "Invalid number", you can modify the expression by using one of the following options:
: variavel3 IS NULL
NVL (: variavel3, ' *') = ' *'
NVL (: variavel3, ' 0') = '0'
Option 1, so the simplest and clearest.
Dimitar
		   
 
            
           
 
		     
How to create the map that updates only the changed lines
 
			 Hello


I have a map that made a merger (update/insert) in a table. The problem is that it will always update all rows in this table. I want to update only the changed lines.


Some dummy code that shows what I want to do.
Current situation (all lines updated):


FUSION
IN
Table 1-t1
USING
(select key_column, Column1, Column2 from table2) t2
ON)
T1.key_column = t2.key_kolumn
)


WHEN MATCHED THEN
UPDATE
SET
T1. Column1 = t2.column1
T1. Column2 = t2.column2
WHEN NOT MATCHED THEN
INSERT
(t1.key_column, t1.column1, t1.column2)
VALUES
(t2.key_column, t2.column1, t2.column2);


What I'm trying to get (only changed the lines updated):
FUSION
IN
Table 1-t1
USING
(select key_column, Column1, Column2 from table2) t2
ON)
T1.key_column = t2.key_kolumn
)


WHEN MATCHED THEN
UPDATE
SET
T1. Column1 = t2.column1
T1. Column2 = t2.column2
* WHERE
T1. Column1! = t2.column1
or t1.column2! = t2.column2*
WHEN NOT MATCHED THEN
INSERT
(t1.key_column, t1.column1, t1.column2)
VALUES
(t2.key_column, t2.column1, t2.column2);


WHERE in WHEN MATCHED t clause is that I'm not able to create via OWB in the mapping. How is that possible?
I tried to look for the solution here and google without success


Thank you!			 
Hello
you left outer join table2, with table1. Then use a filter to determine which rows in which an attribute has changed or no towing in table1 where found.
To compare attributes use expression with nvl to properly handle nulls: nvl(table2.my_attribute,'#')! = nvl(table1.my_attribute,'#')
Kind regards
Carsten.
		   
 
            
           
 
		     
Get the number of chain - PLSQL
 
			 Hello
I have a requerement where I get values such as 10gm, 10.2 cm, 1.2 CM, 1200 g, 1200 Cm and I have to store all these values in number in the system as 10,10.2,1.2,1200,1200. What will be the most simple to achieve this approach (I think that it is better to avoid loops - if possible on the same line) Please help.




Thank you
Arun			 
A pre - 10 g way might be:
SQL> with t as ( -- generating data here:
  2  select '10gm' col from dual union all
  3  select '10.2cm'  from dual union all
  4  select '1.2CM' from dual union all
  5  select '1200g' from dual union all
  6  select '1200 Cm' from dual
  7  )
  8  --
  9  -- actual query:
 10  --
 11  select replace( translate( col, replace(translate(col,'0123456789.','0'),'0',''), 'x'), 'x', '' )
 12  from t;

REPLACE
-------
10
10.2
1.2
1200
1200

Since you're on 11g you might want to compare the rational expression with this pre - 10 average g.
regular expressions tend to consume some CPU.
		   
 
            
           
 
		     
Need an expression to scale an object compared to a 2nd object!
 
			 
I have two objects - a man and a hat.
I want to have an expression for the hat, so that dimensionnera not only with the man compared to the size of his head, he will also retain his position on the top of his head as it evolves.
Here is a video of what I mean:
After the issue of the effects - YouTube
The expressions that I use currently for the position of the hat and scale respectively are:
Position
[thisComp.layer("old_man_thumbs_up").transform.position [0] + 62,]
thisComp.layer("old_man_thumbs_up").transform.position [1-430,
[thisComp.layer("old_man_thumbs_up").transform.position [2]]
Scale:
x = thisComp.Layer ("Old Man thumbs up"). Transform.Scale;
s = linear (x [0], 100, 0, 0, 17);
[s]
			 
Why not just parent the hat man? Who will take care of the scale and position the CAP properly.
		   
 
            
           
 
		     
Dreamweaver is comparable to Visual Web Developer Express?
 
			 
I like the simplicity of the DW formmating and code of DW, but I designed for the majority of asp.net sites. Is DW merchandise in design asp.net compare the Web pages in Visual Web Developer Express?
			 
If you use Dreamweaver for ASP.NET sound more a front end Editor. I use Dreamweaver as front end and Pro in Visual Studio tool for the development of the back-end.
If you are going to spend your money and coding side server is really important to you I suggest you only take a look at the versions of Visual Studio Pro since you can get a lot more with them then the express versions.
However, Dreamweaver is a very powerful tool for the design of front end, so if the design is more important to you, perhaps that dreamweaver is the right choice (although it unfortunately do not support masterpages design but with the good copy paste its easy to implement).
He has allso Expression Studio Web that has integration with asp.net tider, but is less extensible.
M.R.Biesheuvel
www.sportjegeestgezond.nl
		   
 
            
           
 
		     
How to compare number 1 in an expression of router?
 
			 Hi, OTN,.


I have a router activity on my taskflow ADF schema.
One of the expressions must compare a value of database (i.e. oracle.jbo.domain.Number) with 1.


I type an expression #{bindings. NumberAttribute.inputValue == 1} but it throws an exception that is quite understandable - number may not be cast in Long


Can I compare those values without Java code?


Thank you.


JDev 11.1.1.1.0			 
Hi ILya,
Try this (note that 1 in EL is placed inside the quotation marks):
#{bindings.NumberAttribute.inputValue == '1'}

Jean Lou
		   
 
            
           
 
		     
The Apple AirPort Express Base Station is a good solution?
 
			 
I'm moving so leaving the wifi station that Verizon gave me. I think I have the Apple AirPort Express Base Station by station WiFi. I connected an iMac (main computer) MacBook Pro, iPad, iPhone.
My main question is how this used for the WiFi base station compares to others on the market.
Thank you!
Johnny
			 
The AirPort Express has limited the ability of speed due to its slow and limited capacity wireless Ethernet port due to its very small built in WiFi antennas.
However, if the plan of your new Internet Service Provider (ISP) is limited to about 50 Mbit/s, then the Express would probably be OK if most wireless devices will be located near the AirPort Express Terminal.
If the budget allows, an AirPort Extreme is a much better product... up to 10 times the speed of the Express... with additional WiFi antennas located just above the 'tour' to improve performance.
If your new ISP plan is 100 Mbps or higher, then AirPort Extreme would be a better match.
If you are considering other routers from other manufacturers... we cannot comment at all on their performance without knowing the number of brand and model of the device you are considering.
		   
 
            
           
 
		     
Two express AirPort and time capsule connectivity challenge
 
			 
Dear readers,
I have a Time Capsule 802.11 ac connected to my ISP router and this is the router that provides DHCP addresses, etc. In our living room, I have an airport express (2nd generation) connected via radio and it works very well also. Now I got as a second AE (2nd generation) and want to put it on the floor of the attic to get a stronger signal via Ethernet to my TC. When I connect to a LAN of the TC port to the EI LAN port, the AE salon disconnects. When I add the Ethernet of AE cable in the WAN port both t he AE to the attic and TC disconnected. Currently, it is also connected via radio and it works, but will of course loose flow because it must still go through the different floors through the air compared to a stronger signal via Ethernet.
Question I have, can I connect an AE with an Ethernet cable (and how to set up the AE or TC as a result) and an adverse event via wireless (IE editing exsisting which works, but let me know if you have to configure changes too)?
Your help is very appreciated.
			 
Can question I have, I connect an adverse event with an Ethernet cable (and how to set up the AE or TC as a result)
Yes, but you will need to restart and reset back to default settings AE. Then connect the Ethernet cable between a LAN <>- on the TC port to the "O" of EI before WAN port you are trying to configure EI.
The problem that you are experiencing now is probably caused by connecting an Ethernet cable to an adverse event that has already been configured to "extend a wireless network. When EI is configured this way, is expected to Wireless ... not Ethernet. Ethernet is applied, it creates a feedback loop huge on the network which can cause all sorts of issues.
Wizard Installation from Apple because most of the work for you. Just click the WiFi icon at the top of the screen of the Mac and then click on AirPort Express under the title of the new AirPort base station.

When you click on AirPort Express, which will start the configuration "Wizard". It will take a few seconds to analyze the network, and then present a screen that looks like this:

Type a device name you want to call the AE, and then click Next.  Monitor the screen following very closely... See the illustration below to confirm that the AE is set up "extend using Ethernet.  Who will confirm that the wizard picked the Ethernet between the TC and AE and apply the correct settings to EI.

When you see the message Setup is complete, click done and you're done.
If the 'other' AE is already set up to extend, then no further changes will be necessary on this device.
		   
 
            
           
 
		     
Defective Tecra S11 - need new notebook with Express-Card-Slot
 
			 
My TECRA S11 166 is defective.
I need a new Notebook with * Express-Card-Slot * and (if possible) RS232.
What type of laptop comes with an Express Card Slot?
			 
Hello
Ago different Toshiba computers laptops on the market and Toshiba release new models at very short intervals.
I recommend you visit the page of the Toshiba laptop computer product and to compare the models and series available.
Computers Tecra laptops offer a professional use and Portege series is best in mobile computing.
The series of satellites is machines of entertainment designed to provide exceptional all-round performance.
http://www.Toshiba.EU/laptops/
		   
 
            
           
 
		     
How to test the signal strength of an Airport Express, which extends a network?
 
			 
I am trying to understand how my Airport Express is actually help to expand my network, and if I should move somewhere different. Any help would be appreciated!
Current situation: my base station is an AirPort Extreme in our apartment computer room; for the internet, which is plugged into the wall. The wifi network is extended in the living room via an AirPort Express (version 7.6.4). There are on the same cabinet as the AirPort Express to Apple TV. The Airport Express has an optical cable connecting to a sound bar (which has an additional HDMI connection to the TV).
I don't really know if the AirPort Express Terminal, he does something useful. The network is set to be extended, best I can tell: Airport Extreme network Mode is "Create a wireless network", and network Mode of the AirPort Express is "extend a wireless network. But still, the wifi on my iPad and iPhone signal strength seem to fall much in the living room. Apple TV usually broadcasts music from my desktop computer (in the computer room) well enough, but if I try to play music from my computer via the Apple Express at the soundbar, the connection is terrible and fall. (Which could be a problem with wifi, or could be an aging Airport Express question, could be a cable problem or might be a sound bar problem...)
An example of what worries me: if I go to the Airport utility on my iPhone and a glance at the Airport Extreme, it has 4 Wireless, including Apple TV clients. But if I look at the AirPort Express, there sometimes a client wireless (iPhone), but never shows the Apple TV: even if the Apple TV is about 30 cm of the Airport Express. It's as if the 30cm distant to the Airport Express connection is weaker than the connection of two-rooms-distant Airport Extreme, but I am probably wrong that.
In any case, is there a way to test what speed is through the AirPort Express, compared to through the extreme? I tried to use applications like CloudCheck on my iOS devices, but those only measure the speed of my network, and it is unclear whether or not he uses the Extreme or Express.
Thanks in advance and all apologies if I used (almost inevitably) 'Express' when I should have used "Extreme", or vice versa, somewhere at the top.
			 
One way to see the strength of the signal is the Alt (option) key while clicking on the WiFi icon in the menu bar.
But you see not directly related to the airport of arrival. Also the Airport utility does not give much information.
You can see a lot more with the free app (Appstore) called "WiFi Scanner".
The problem could be that the place you have chosen for the Airport Express can be better: it should be somewhere in halfway (in force) between the Real and where you sit with the iPad/iPhone.
		   
 
            
           
 
		     
Express airport, used for the speakers, loses the connection to the network wireless after about 30 seconds
 
			 
Second generation of airport express base station used to play music loses connection wireless, also a second express network, gen airport after about 30 seconds.  Tried to change channels, reorienting the airport, using a different device - ipod and ipad, to listen to music - nothing works. Interestingly, my Amazon Music plays fine on the same airport and speakers and loses no signal.  Any help?
			 
Where the two Express base compared to the other station? Same room, different rooms or different floors? The host of iTunes (iPod or iPad) location when the streaming? Near the Express which provides the network Wi - Fi or the one used for streaming?
		   
 
            
           
 
		     
PCI-Express?
 
			 
I looked on several review sites on my IBM Thinkcentre M52 9210 (the compact one, NOT the tour) and he says he has ONE PCI-EXPRESS X 16 expansion slot. I printed a picture of the PCI-E x 16 slot and compared it with that of my mahcine. It says it also has a PCI slot and I can see it, and below must be PCI - E, the black one.
But when I look closely it doesn't even look close to the image I had printed a. It is around 90 mm (more or less a few mm) and instead of having two separate ' gaps "(comme on pourrait identifier leur PCI-E x16), my had 5"deviations"in them.". " I plan to upgrade my computer and install a dedicated video card to replace my old Intel GMA 950 integrated chipset and I really need to know if it is PCI-E or another type of slot machine.
Thank you.
Take a look at this image:
http://i.Dell.com/images/global/learnmore/pcie_connector.jpg
You can tell from this image, the x 16 PCI-E has two what is called the 'gaps', a smaller on the right, a bigger to the left. What intrigues me is that the mine has five gaps, instead of two. I looked up my machine on the lenovo site, and it does not say it has a PCI-E slot, but just, he doesn't look like a PCI-E x 16. I really need someone to confirm this because if it is not PCI-E x 16 I have to get a PCI graphics card...
			 
Poweraml,
According to our product specifications, the ThinkCentre M52 9210 machine type has 2 expansion on a PCI riser slots:
Slot 1 is a half-length, x 1 PCI Express slot intended to be used with our connection card PCI-E DVI - D (part number 73 P 2516). To do this, not supported x 16 PCI Express adapters.
Slot 2 is a half-length, version 2.2, the PCI slot.
These specifications are available at:
http://www.Lenovo.com/support/site.WSS/document.do?lndocid=MIGR-60416#exp
I hope this helps.