Compatibility of RMAN backup 32/64 Bit

Similar Questions

• RMAN backup incremental level 1 without level 0-10 gr 2

  Hello
  
  I'm a bit confused after a few tries.
  
  The issue: It is mandatory to perform incremental level 0 backup before level 1 using Oracle 10 g 2?
  
  On Oracle 11.2 is mandatory, but I don't know about Oracle 10.2.0.5.
  
  11.2 test. If there is no level 0 rman take care on this subject and automatically perform level 0 before level1
  

  RMAN> backup incremental level 1 database;
  
  Starting backup at 29-APR-11
  using channel ORA_DISK_1
  no parent backup or copy of datafile 1 found
  ...
  channel ORA_DISK_1: starting incremental level 0 datafile backup set
  channel ORA_DISK_1: specifying datafile(s) in backup set
  ...

  Docs said:
  Incremental backups capture only blocks that change between backups in each data file.
  In a typical incremental backup strategy, an incremental backup of level 0 is used as a starting point. A level 0 backup captures all the blocks in the data file.
  
  So, on Oracle 10.2.0.5 happens not like 11.2:
  
  Parade level 1 without level 0 backup:

  RMAN> list backup;
  
  
  RMAN> backup incremental level 1 database;
  
  Starting backup at 29-APR-11
  using channel ORA_DISK_1
  channel ORA_DISK_1: starting incremental level 1 datafile backupset
  channel ORA_DISK_1: specifying datafile(s) in backupset
  input datafile fno=00001 name=+DG_ORCL/db10g/datafile/system.260.749756975
  ...
  channel ORA_DISK_1: starting piece 1 at 29-APR-11
  channel ORA_DISK_1: finished piece 1 at 29-APR-11
  piece handle=+DG_FRA/db10g/backupset/2011_04_29/nnndn1_tag20110429t190340_0.260.749761421 tag=TAG20110429T190340 comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:25
  channel ORA_DISK_1: starting incremental level 1 datafile backupset
  channel ORA_DISK_1: specifying datafile(s) in backupset
  including current control file in backupset
  including current SPFILE in backupset
  channel ORA_DISK_1: starting piece 1 at 29-APR-11
  channel ORA_DISK_1: finished piece 1 at 29-APR-11
  piece handle=+DG_FRA/db10g/backupset/2011_04_29/ncsnn1_tag20110429t190340_0.262.749761449 tag=TAG20110429T190340 comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:05
  Finished backup at 29-APR-11
  
  RMAN> backup archivelog all delete input;
  
  Starting backup at 29-APR-11
  current log archived
  using channel ORA_DISK_1
  ...
  Finished backup at 29-APR-11
  
  RMAN> shutdown abort;
  Oracle instance shut down

  Delete all (except SPFILE) ASM files.
  

  ASMCMD> cd +DG_ORCL/DB10g
  ASMCMD> ls
  PARAMETERFILE/
  spfiledb10g.ora

  So we will perfom a database restore
  

  oracle@butao:/home/oracle> rman target /
  Recovery Manager: Release 10.2.0.5.0 - Production on Fri Apr 29 19:06:52 2011
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  connected to target database (not started)
  RMAN> startup nomount
  Oracle instance started
  
  Total System Global Area     293601280 bytes
  Fixed Size                     2095872 bytes
  Variable Size                 92275968 bytes
  Database Buffers             192937984 bytes
  Redo Buffers                   6291456 bytes
  
  
  RMAN> restore controlfile from '+DG_FRA/db10g/backupset/2011_04_29/ncsnn1_tag20110429t190340_0.262.749761449';
  
  Starting restore at 29-APR-11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: restoring control file
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:05
  output filename=+DG_ORCL/db10g/controlfile/current.263.749761699
  output filename=+DG_FRA/db10g/controlfile/current.263.749761699
  Finished restore at 29-APR-11
  
  RMAN> startup mount
  
  database is already started
  database mounted
  released channel: ORA_DISK_1
  
  RMAN> restore database;
  
  Starting restore at 29-APR-11
  Starting implicit crosscheck backup at 29-APR-11
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  Crosschecked 1 objects
  Finished implicit crosscheck backup at 29-APR-11
  
  Starting implicit crosscheck copy at 29-APR-11
  using channel ORA_DISK_1
  Finished implicit crosscheck copy at 29-APR-11
  
  searching for all files in the recovery area
  cataloging files...
  cataloging done
  
  List of Cataloged Files
  =======================
  File Name: +dg_fra/DB10G/BACKUPSET/2011_04_29/ncsnn1_TAG20110429T190340_0.262.749761449
  File Name: +dg_fra/DB10G/BACKUPSET/2011_04_29/annnf0_TAG20110429T190442_0.264.749761485
  
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to +DG_ORCL/db10g/datafile/system.260.749756975
  restoring datafile 00002 to +DG_ORCL/db10g/datafile/undotbs1.261.749757085
  restoring datafile 00003 to +DG_ORCL/db10g/datafile/sysaux.262.749757095
  restoring datafile 00004 to +DG_ORCL/db10g/datafile/users.264.749757107
  channel ORA_DISK_1: reading from backup piece +DG_FRA/db10g/backupset/2011_04_29/nnndn1_tag20110429t190340_0.260.749761421
  channel ORA_DISK_1: restored backup piece 1
  piece handle=+DG_FRA/db10g/backupset/2011_04_29/nnndn1_tag20110429t190340_0.260.749761421 tag=TAG20110429T190340
  channel ORA_DISK_1: restore complete, elapsed time: 00:00:26
  Finished restore at 29-APR-11
  
  RMAN> recover database;
  
  Starting recover at 29-APR-11
  using channel ORA_DISK_1
  
  starting media recovery
  
  archive log thread 1 sequence 27 is already on disk as file +DG_FRA/db10g/onlinelog/group_3.259.749756971
  archive log thread 1 sequence 28 is already on disk as file +DG_FRA/db10g/onlinelog/group_1.257.749756963
  archive log filename=+DG_FRA/db10g/onlinelog/group_3.259.749756971 thread=1 sequence=27
  archive log filename=+DG_FRA/db10g/onlinelog/group_1.257.749756963 thread=1 sequence=28
  media recovery complete, elapsed time: 00:00:02
  Finished recover at 29-APR-11
  
  RMAN> alter database open resetlogs;
  
  database opened
  
  RMAN>

  See that I don't need level 0 backup to restore the level 1.
  
  Thank you
  Levi Pereira

  Levi,

  Please visit: http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup004.htm

  If no level 0 backup is available, then the behavior depends on the setting of compatibility mode. If compatibility is > = 10.0.0, copies all blocks changed since the file was created RMAN and stores the results as a level 1 backup. In other words, the CPN at the time the incremental backup is taken is the creation of SCN file. If compatibility<10.0.0, rman="" generates="" a="" level="" 0="" backup="" of="" the="" file="" contents="" at="" the="" time="" of="" the="" backup,="" to="" be="" consistent="" with="" the="" behavior="" in="" previous="">

  Same info is here:

  http://www.Pythian.com/news/287/level-1-incremental-backup-in-Oracle-10G/

  Concerning

  Grosbois

• How to create a database in the server-2 based on the game of RMAN backup in server-1

  Hi all

  I need help related to RMAN backup in the following scenario, my server-1 details are given below.

  * Operating system-Windows server 2012 R2 Standard Edition

  * Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  CORE 11.2.0.1.0 Production

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production,

  I have configured RMAN and level 0 and backup of level 1 with on the external HARD drive.

  all the RMAN backup is located in this drive external HARD only, same archivelog.

  My question is,

  How to create a database to Server-2 based on the RMAN backup I took in server-1.

  It's to help me create a server test and even if the server-1 crash, then I can create a database in the new server-2 with backup I took on the external HARD drive.

  Is it possible to achieve the same or not. Kindly suggest me or share a good Internet link or document and share your knowledge to achieve my need of stimulus.  This will really help me

  It does not matter whether you use ASM. The link above should guide you on how to change the file names of data before restoring if the location of the data file on server 2 will be different from server 1.

  Since you asked for 11g binding, it is here

  http://shivanandarao-Oracle.com/2012/04/28/duplicating-database-without-connecting-to-target-database-or-catalog-database-in-Oracle-11g/

  Kind regards

  Shivananda

• Restore the RMAN backup on another server

  Hello

  ENV: Oracle 10 g 2 64 bit, RHEL 5.8 64 bit on ASM, Database size = ~ 1.3 to

  Backup RMAN of PROD will FRA and then backed up to tape. I have limited access to the PROD because it is maintained by 3rd party.

  My client is planning to move this database on their own datacenter (from the 3rd party data center). For test purposes, I asked DBA of 3rd party to provide us with an export of drawings required data pump. Export takes about 8 hours, and the import takes the same time to the new location. To copy the files exported to new locations takes another few hours (over the network). The total size of the dump file is around 500 GB. Thus, a whole cycle of Export-Import-copy takes about ~ 20 + Hrs.

  I want to try another option to reduce the time required for the updating of the database of PROD and which is "use RMAN backup of PROD ' and restore it on the data center server. RMAN full backup takes ~ 4hrs PROD and the restoration should be at the same time (new server has better and faster HW, storage with a SSD). I found this thread very useful on the Oracle Forms on this topic:

  Restore backup RMAN on another server

  This thread contains very good example for a restoration of database on the file system.

  I have a bit of confusion because my database uses ASM. The default location of the backups in PROD is FRA (on ASM == > db_recovery_file_dest = + FRA ). If I understand correctly, the RMAN backup must be in the same place where he was on the PROD Server - i.e. the diskgroup FRA.

  If I get a copy of the part 3 RMAN backup, how would I copy on FRA?

  OR can / should I just change the init parameter "db_recovery_file_dest" on the new server to point to the file system directory where the backup (say "/ ora_backup") and RMAN will pick up and restore the database?

  Please advise!

  Best regards

  You can restore the backup files to any location, then you must configure the channel using the "CONFIGURE CHANNEL device type disk format 'new location ';

  This thread will help

  Restore from a different location from the original location of RMAN backup

• How to find the total size of the RMAN backup files?

  Hello

  env: Oracle 10 g 2, RHEL 64 bit

  My customer has a production database where rman backups are taken: level 0 backup every Sunday and level 1, Monday to Saturday.

  I have very limited access to this database of production because it is managed by a third party, and they don't give me my required info (don't know why). I don't have access to the rman repository. To connect to the database that I have to connect to a staging server, then connect to the database server. I have no access to Enterprise Manager. So in short, my access is limited. I want to collect information on the total size of the files of rman backup - both for level 1 to level 0 backups separately. I understand that this info can be retrieved from the rman repository. Is there a dictionary views/tables of data where I can get this info?

  Best regards

  Hello

  Have you tried to check forum this:https://forums.oracle.com/thread/1097939

  HTH

• RMAN backup is too slow

  Hello

  I have the oracle database (11 GR 1 material) 64 bit installed on 64-bit Windows 2003 R2 server. MY DB size is almost 152 GB and its operation in log mode archive. When I run the RMAN backup, its takes too long, it took 22 hours and still functioning, I'm not sure why it is that consumes a lot of time...

  I use RMAN script below...

  Run {}

  allocate channels ch1 disc type;

  backup FILESPERSET 32

  format tag 'F:\RMAN_BACKUP\%d_t%t_s%s_FULL' Full_DATABASE_07_july_13

  (database)

  COURSE CONTROLFILE, SPFILE;

  SQL 'alter system archive log current;

  backup FILESPERSET 200

  format 'F:\RMAN_BACKUP\ARC_%d_%s_%t '.

  (archivelog all);

  output channel ch1.

  }

  Kindly help me and what's wrong in this please tell me. Also tell me if any other necessary information...

  Thank you and best regards,

  John of Vikash

  It also depends on your storage system. What is your speed on the RMAN disk?

  If you have enough flow, then you must complete this debit allocate more channels.

  If your drive canprovide you 1 Gbit/s, then it will take 152 seconds to get the backup.

  What is your rate?

• RMAN backup and restore into Production KEEPS RAC and DATA

  Hi gurus of the Oracle
  
  We need the expert advice for tune and cross check the RMAN Script for Production environment below below
  
  Please suggest any corrections or comments on below mention scripts which will be executed on RAC and Production DATA GUARD environment
  
  LINUX RHEL 5.5 64-bit
  ORACLE GRID Infrastructure R2 Version 11.2.0.3.0 (we use ASM Cluster File system)
  ORACLE11g R2 Version 11.2.0.3.0
  
  We planned for basically rman backup drive using control file target instead of recovery catalog database
  
  We will have Data Guard Setup between 2 remote sites of database and two remote sites have running the local 2-node RAC database
  
  =========================RMAN_Full_Backup.sh=========================================================================
  #! / bin/bash
  . /Home/orarac/.bash_profile
  logloc = 'date' + rman_backup_lvl0_orcldb_ %m %y hour %M %S %d ".log
  # Start rman backup
  Target of $ORACLE_HOME/bin/rman = / log = / backup/RMAN_Log / $logloc < < EOF
  run
  {
  allocate channels ch1 type disk maxpiecesize = 1024 M;
  allocate channel ch2 type disk maxpiecesize = 1024M;
  database backup incremental level 0 FORMAT ' / backup/RMAN_Backup/rman_bkp_%U_%d_%T_DATAFILE_LVL0_%D_%M_%Y'
  include current controlfile
  tag 'datafile_full ';
  }
  
  run
  {
  allocate channels ch1 type disk maxpiecesize = 1024 M;
  allocate channel ch2 type disk maxpiecesize = 1024M;
  overlap archivelog all;
  SQL 'alter system archive log current';
  backup ARCHIVELOG all delete them all input FORMAT ' / backup/RMAN_Backup/rman_bkp_%U_%d_%T_ARCHIVELOG_%D_%M_%Y'
  tag 'archivelog_full ';
  }
  cross-checking of backup;
  delete noprompt obsolete;
  Save the list of database;
  EXIT;
  EXPRESSIONS OF FOLKLORE
  ==================================================================================================
  =========================================RMAN_Inc_Backup.sh ===========================================
  #! / bin/bash
  . /Home/orarac/.bash_profile
  logloc = 'date' + rman_backup_lvl1_orcldb_ %m %y hour %M %S %d ".log
  # Start rman backup
  # use only the following line if this script is run via the root CRON
  Target of $ORACLE_HOME/bin/rman = / log = / backup/RMAN_Log / $logloc < < EOF
  
  Run {}
  allocate channels ch1 type disk maxpiecesize = 1024 M;
  allocate channel ch2 type disk maxpiecesize = 1024M;
  database backup incremental level 1 FORMAT ' / backup/RMAN_Backup/rman_bkp_%U_%d_%T_DATAFILE_LVL1_%D_%M_%Y'
  include current controlfile
  tag 'datafile_Incr ';
  }
  Run {}
  allocate channels ch1 type disk maxpiecesize = 1024 M;
  allocate channel ch2 type disk maxpiecesize = 1024M;
  overlap archivelog all;
  SQL 'alter system archive log current';
  backup ARCHIVELOG all delete them all input FORMAT ' / backup/RMAN_Backup/rman_bkp_%U_%d_%T_ARCHIVELOG_%D_%M_%Y'
  tag 'archivelog_full ';
  }
  cross-checking of backup;
  delete noprompt obsolete;
  backup from the list;
  EXIT;
  EXPRESSIONS OF FOLKLORE
  -bash - $3.2
  ====================================================================================================
  ===================================RMAN_DB_Restore.sh====================================================
  -bash-3, $ 2 cat /home/orarac/RMAN_Scripts/RMAN_DB_Restore.sh
  #! / bin/bash
  . /Home/orarac/.bash_profile
  logloc = 'date' + rman_restore_orcldb_ %m %y hour %M %S %d ".log
  # use only the following line if this script is run via the root CRON
  Target of $ORACLE_HOME/bin/rman = / log = / backup/RMAN_Log / $logloc < < EOF
  Run {}
  BOOTABLE MEDIA FORCE;
  RESTORE THE DATABASE;
  RECOVER THE DATABASE;
  ALTER DATABASE OPEN;
  }
  EXIT;
  EXPRESSIONS OF FOLKLORE
  ====================================================================================================
  
  Concerning
  Hitgon

  Thank you mseberg

  This command is the full backup or a backup of level 0?

  full backup as compressed backupset
  data include current controlfile more archivelog deletion entry;

  We use command below for the full backup of database.
  database backup incremental level 0 FORMAT ' / backup/RMAN_Backup/rman_bkp_%U_%d_%T_DATAFILE_LVL0_%D_%M_%Y'
  include current controlfile
  tag 'datafile_full ';

  We use the command below to the increment backup
  database backup incremental level 1 FORMAT ' / backup/RMAN_Backup/rman_bkp_%U_%d_%T_DATAFILE_LVL1_%D_%M_%Y'
  include current controlfile
  tag 'datafile_Incr ';

  What is the different when we use
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;

  or

  full backup as backupset compressed database include controlfile current more archivelog delete all input;

  Concerning
  Hitgon

• Create the RMAN backup database

  I'm a junior DBA and want to help by experts.
  
  I have complete production, including the file autobackup controlfile RMAN backup. One of the requirements is to recreate a new database using these two files (the rman bkup and controfile autobackup).
  Our environment is Windows 2003 server 64-bit.
  I have already installed the database software.
  Please guide me with the rest of the steps.
  
  Thank you
  Rahul

  After services are created and then place the backups rman bkup and controlfile in fra location (check db_recovery_file_dest), follow these steps.

  Restore automatic backup controlfile;
  bootable media;
  restore the database;
  recover the database;
  ALTER database open resetlogs;

• Causing the system RMAN backups for not responding

  Need some help here. I inherited a system in which has about 65 GB memory, Linux 64 - bit - 16 processors. Whenever an RMAN backup is performed, else cannot do anything. The load average is about 10 (max). My theory is that it is the init.ora parameters, but not sure... Here's the deal:
  
  SGA_MAX_SIZE = 47GB
  SGA_TARGET = 0
  shared_pool_size = 5G
  JAVA_POOL_SIZE = 1 G
  LARGE_POOL_SIZE = 0
  db_cache_size = 38G
  
  I'll look into what I have to change. I just wanted to get other opinions since I inherited a wasp nest and need elements good enough before you can change all the settings. All documents, Metalink, etc that you can provide to support a change in these parameters would be great. Thank you.

  Hello

  You can check http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtunin.htm

  You can use the formula to set the size of the pool. If you do not install the largest basin of the rman uses memory of shared pool which can cause the problem of e/s/execution.

  LARGE_POOL_SIZE = number_of_allocated_channels * (16 MB + (4 * size_of_tape_buffer))

  Hope this will help you.

  Thank you
  Krishna

• My RMAN backup failed

  Yesterday my RMAN backup failed and wrote my diary RMAN
  
  Cat RMAN_REPORT_030411040001_RDFDB.log
  
  Recovery Manager: Release 10.2.0.4.0 - Production Sun 3 Apr 04:02:12 2011
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  connected to target database: RDFDB (DBID = 3113112584)
  connected to the recovery catalog database
  
  RMAN >
  from full resynchronization of the recovery catalog
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of command report to the 03/04/2011 04:02:21
  RMAN-03014: implicit recovery catalog Resync failed
  RMAN-03009: resync command failed full to the default channel to 03/04/2011 04:02:21
  ORA-01578: block ORACLE (corrupted file # 2, block # 19235) data
  ORA-01110: data file 2: ' / home/oracle10g/rmandb/dbf/data/rmandb_undotbs.dbf'
  
  
  My name is RDFDB and the error is RMANDB which is on another machine how can that I solve this problem?
  
  Another backup RMANDB is going well I am a bit confused as says it error ORA-01578: data corrupted ORACLE (file # 2, block # 19235) block
  ORA-01110: data file 2: ' / home/oracle10g/rmandb/dbf/data/rmandb_undotbs.dbf' and this means that there is nothing to do with RDFDB and in what RMANDB undotbs and ifthat is the case how come RMANDB happenend backup without any problem... well kindly help me to solve this problem.

  The block has already marked corrupt. As a result, RMAN ignores when you perform a backup of RMANDB.

  The simplest solution is to recreate the tablespace Undo in RMANDB. (Create a new Undo tablespace, alter system set undo_tablespace and then drop the old undo tablespace, preferably after a reboot).

  In this way, the RESYNCHRONIZATION for RDPDB command will access a new set of undo blocks.

  Hemant K Collette

• RMAN backup permission problem

  My RMAN backup is scheduled.
  
  Even backup script fails sometimes and sometimes executed successfully
  When fails, it gives the following error.
  
  Your "cron" job the xxxx
  / U07/RMAN/scripts/call_arch_bkup. SCP
  
  produces the following output:
  
  
  Recovery Manager: release 9.2.0.1.0 - 64 bit Production
  
  Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
  
  connected to target database: xxxx
  connected to the recovery catalog database
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04005: target database error:
  ORA-09925: cannot create the audit trail file
  SVR4 error: 13: permission denied
  Additional information: 9925
  
  
  If there is permission problem then there a few times, it runs successfully.

  It totally depends on your condition. Security can you move your old files to another location, course and then run your command?

• Import of schemas and tables of RMAN backup

  Hi all

  I have here are 3 requirements:

  (1) is it possible that I can import a single table using RMAN backup, because I have no more than one day of EXPDP dump file and the requirement is to store the data of three days.

  (2) is it possible that I can import a single SCHEMA using RMAN backup, because I have no more than one day of EXPDP dump file and the requirement is to store the data of three days.

  (3) can I import a package from the RMAN backup?

  I have incremental backup of level 1 and level 0.

  My database is 11.2.0.3

  Thank you and best regards,

  Mukesh

  Hi Mukesh,

  All of your needs can be met with output up to 11g using RMAN database, but beyond of 12 c, you can restore a single table RMAN backup (RMAN BACK TABLE new feature to the 12 c (Doc ID 1521524.1) Oracle database). For your condition impdp/expdp is the best Utilities option until oracle provided up to version 11 g.

  I hope this helps.

  Kind regards

• The user managed based backup Rman backup cold cold vs

  Hi all

  I just want to know the advantages and disadvantages for backup managed user cold and cold backup Rman.

  What is the best cold backup?

  Some some can help me?

  Thank you

  Cedric Joshi

  Hello

  Both are good only... If you took the clod backup (managed by the user), you can also do with RMAN catalog.

  I feel clod RMAN backup is good.

  Reason:

  ======

  ++ with RMAN you can avoid used used block, you can only backup used blocks

  ++ RMAN has its own compression algorithm

  ++ We also have the ability to assign multiple channels to parallelize the backup

• RMAN backup location must change and remove obsolete

  Dear Experts,

  I'm working on the following environment,

  Operating system: Windows server 2012 R2

  Oracle version: 11.2.0.1.0 release

  Type of RMAN backup: Cumulative (preferred by the direction and I can't change it in differential backup)

  My current situation,

  I set up RMAN and H: drive for purposes of backup and G: for Archivelog.

  Recently, my city was covered by the flood waters and the server works not for a week so that we delete obsolete level 0 does not work.

  Currently there is not enough space to run a level 1 and level 0, while I should change the backup location.

  My Question is,

  (1) I need to change this location of drive H: to G: drive backup backup correctly without error not enough space.

  (2) after having taken a level 1 and level 0, depending on my 1 redundancy, RMAN mechanism should delete obsolete backup disk without failure G: and H:.

  Kindly help me how to get to my need. This will help me, thanks in advance

  You can

  1. replace the DB_RECOVERY_FILE_DEST G:

  2 run backups

  3. wait for the DELETE OBSOLETE delete obsolete backups of H:

  and then

  4. change the DB_RECOVERY_FILE_DEST return h as it was more early

  In this way, you don't have to use the FORMAT or CHANNEL of CONFIGURE commands (I was referring to CONFIGURE CHANNEL, not ALLOCATE CHANNEL) to change the destination of the backup

  Hemant K Collette

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you