Causing the system RMAN backups for not responding

Similar Questions

• Back up and restore the question: system image backup does not show all by backup, but, but still it is there on this disc 'G '.

  Issue of OP - backup and restore

  Hello Forum,

  Recently by doing some interviews I found something strange, almost a week ago, I did a backup image of the system disk. Today, I was looking for the backup image, it seems there is no picture, as you can see on the screenshot attached No.1 he says there are no backups saved to this location, so I clicked on "select another backup...". "but nothing has been found as you can see on the screenshot No. 2, but it is still there on this disc 'G' as selected on the screen n ° 3.

  This image is useless? Shell I have delete and make a new one?

  Answers will be appreciated

  Thank you

  Motiman

  

  Hi Motiman,

  Thanks for posting your query on the Microsoft community.

  We understand the inconvenience caused and we will try our best to solve the problem.

  This problem may occur if the backup system image files is not created correctly or may be corrupted.

  I suggest you try again to create the system image backup and check if it helps.

  Refer to the following Microsoft Help article, which explains: how to create backup system Image in Windows 7.

  http://Windows.Microsoft.com/en-in/Windows/back-up-programs-system-settings-files#1TC=Windows-7

  For more information about the backup system image and recovery, see the link below:

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It can be useful, we meet with the status of your question. We will be happy to help you.

• Error during the full backup of the system Vista "Media is not UDF.

  Original title: error during the full backup of the system Vista "Media is not UDF" I tried CD - R and DVD + R

  I just finished day three re - build with all the latest updates and now I want an IMAGE backup to recover from.  When I run Backup asked that media... suggest a label for the DVD but I get the error 'Media is not UDF' end there...

  Also if I back up to another hard drive on my system can recover from this Image?

  Thank you!

  Ken D

  Hello

  backup on an external hard drive or DVD

  the 1st link below is how do the backup of the complete computer for the company, ultimate and vista business

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Considerations to keep the retention of RMAN backup for 1 year

  Dear all,

  We use 10 g 2 2-node CCR on Windows Server. We use Netbackup Symentec 7.5 for the backup of Oracle databases. We want to change the retention period of the RMAN backups for 1 year. Another change that the window recovery from RMAN backup at 365, what are the other considerations (any other configuration change, another point etc.), we should be aware of?

  Best regards

  Riaz

  Your controlfile would spend unusually large.  It can result in CF-queue waiting for when the generation of the archivelogs and performing backups.

  Hemant K Collette

• After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

  What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

  If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• 'The diagnostic policy Service is not responding' after updating iTunes

  I received error message 'The diagnostic policy Service is not responding' since my wife click and ran an update to iTunes. I tried to remove iTunes and restarting, the system restore and sfc/scannow. Any other suggestions?

  Hello

  I suggest that you follow the steps below and check if the problem persists.

  Step 1:

  a. Click Start, type "Services.msc" in the search box, and select 'Services '.
  b. search for 'Diagnostic policy Service' and right-click and select "Properties".
  c. now, restart the service as well as addiction services

  Step 2:

  Test the issue in a clean boot State, and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

• Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  250GB_DRIVE system name
  System manufacturer HP Pavilion 061
  EG705AA-ABA M7265C system model
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 4 GenuineIntel ~ 2800 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.17, 20/04/2006
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  250GB_DRIVE\HP_Administrator user name
  Time zone Pacific Daylight Time
  Total physical memory 072,00 MB 3
  1.55 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.83 GB
  Paging file C:\pagefile.sys

  Hello

  The ASR (automated system recovery) tool must have a disk for restoration purposes. The best option, if you really want to use ASR, is a floppy of USB external as suggested by chrisamiller.

  You can also follow this procedure to create the ASR files without the floppy drive and then copy them to another location to create a floppy disk or, if you're lucky, your PC can boot from a USB key (I never tried to start ASR on a key, do not know if it will work or not, but it might be worth it) :

  "You can"trick"the ASR in the race without a floppy drive." When it gets to the point where he writes on the diskette to cancel it. He writes two files, which are used for recovery, in the Windows\Repair directory. After completing your ASR copy these two files (files asr.sif and asrpnp.sif) to a network location and then make the diskette also. Make sure you update your disk whenever you make a new ASR or your backup will be watered.

  Or, you can use a USB floppy drive. It is sometimes the only option, especially if you need to install SCSI or SATA drivers during the recovery. »

  a: when you start the backup, it may be in Wizard mode. Follow the link to the Advanced Mode.
  b. Backup tab.
  c. click on the box next to the drive you want to back up so that it has a blue box.
  d. backup media or file name: Browse.
  e. Select a new file name on your CD.
  f. start the backup.

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• Failure of the Time machine backup could not save "My Passport"

  When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

  Failure of the Time machine backup could not save "My Passport"

  
  

  Does anyone has an idea to help me with this problem?

  
  

  (Sorry for my English but I speak French in Switzerland...)
  

  Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try.  http://pondini.org/TM/A4.html

• I am suddenly unable to rename folders. Insert the cursor, but it does not respond when I type characters, or even when I hit him back out. Know a simple fix?

  After cropping of a photo with Photoshop I discovered that I was unable to rename.  I soon found out that the same thing is true when I tried to rename main folders in My Documents.  I am able to insert the cursor, but it does not respond when I type characters, or even when I hit him back out.  Know a simple fix?

  Name change is a directory operation.  It would seem that you have read and write access to your directories, but you do not change access.  This highlights a problem with file permissions.  How is 'Simple' the fix depends on which version of Windows you have to a certain extent.

  Windows XP Pro (with "Simple file sharing" turned off) using the security"" tab. When you right-click on a file or a folder and select 'Properties', then click on the 'Security' tab to view and change the permissions.

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Windows XP Home Edition is a bit more complicated.  You can start safe mode and log in as administrator for the 'Security' tab as above, or you can open a command prompt window (start-> Run-> "cmd") and allows you to display the 'cacls' command or change the permissions of files and folders.  You should check that your username has permission to ull 'F' for your records.  Not pretty, but it works.

  CACLS: <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the power in the system tray icon does not show me the remaining battery time

  I bought a new battery for my inspiron 1420 and the power in the system tray icon does not show me the remaining battery time, it indicates the only remaining percentage. My battery earlier showed. Can someone tell me how to show the remaining time. Thank you

  I force install quickset once again, but I installed the support center and once my system has been restarted, he began to show me both but I'm not sure, this is because the installation of support center. Thanks anyway

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K