Compatibility of software designed for windows 95 with Windows 7
Dear team,
Plan course multimedia order to learn the flute (link: http://www.one-world-trading.com/bansuri_guru.shtml). According to the interaction that I had with the seller, this course and the software was designed for windows 95 and it may or may not work on windows 7, which is currently installed on my system. As this course is now out of new creation/editing/printing, I can't it anywhere except from the link above.
Please let me know what is the possibility of this software running on Windows 7 or higher version and if I can order this.
Your advice would be really helpful.
Kind regards
Elisha SP
E-mail address is removed from the privacy *.
E-mail address is removed from the privacy *.
India
It could work according to the architecture of Windows 7 installed. If you have Windows 7 64 bit installed, it may not work because the software could have 16-bit code not supported by 64 bit versions of Windows.
To determine if you have Windows 7 64-bit:
Click Start, right computer
Click on properties
Go to the section Type System
Tags: Windows
Similar Questions
-
Sa20-S103 can't install software designed for Windows XP
Because I installed a service pack II - I had a problem with the installation of some software on my SA20.
Even with software designed for Windows XP. We have several PC's desktop and my SA20 is a laptop. All PCs have the same XP version with the same updates.So in my widows case gives the following warning:
C:\WINDOWS\SYSTEM32\CONFIG. NT. This file system is not appropriate to run MS-DOS or Microsoft Windows applications. Select a button 'Close' to terminate the application activity.Microsoft told me: Sorry, it's a problem with Toshiba Windows XP under System. They explained that in this case service pack II can work not properly in contact with the XP system redesigned for Toshiba. Who can help me?
Rafal
Hello
Check this link http://support.microsoft.com/?kbid=324767 please. I hope that there is the solution for you.
-
All,
It was reported that when the upgrade of the Bluetooth with Enhanced Data rate software II for Windows 7 to version 6.4.0.1700 is originally a wipe on the OS main drive (usually C:\)
Version: 6.4.0.1700 Release date: 16/05/2011 Here are the units that uses this version of the driver.
Support models ThinkPad L420, L421 ThinkPad L520 ThinkPad T420, T420i, T420s, T420si ThinkPad T520, T520i Thinkpad W520 ThinkPad X1 ThinkPad X220, X220i, X220 Tablet, X220i Tablet ThinkPad Edge E220s ThinkPad Edge E420, E420s ThinkPad Edge E520
Has been raised to engineering and the team is currently working on this topic.
Please do not update the Bluetooth driver until further notice *.
We are in a process to pull the driver from the Support Site and ThinkVantage System Update
Main thread here
JMT
-
If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?
There are a number of variables here. First of all if you go to the 64 bit version of Windows 7, you will not be able to run 16-bit programs in normal mode. However, if you go to the professional version of Windows 7, you can install the free XP Mode and run 16-bit programs under that. XP mode runs as a task under Windows 7. It works fine as long as you can live with the limited graphics. I have 900 x 600 16-bit color at home.
If you go with the 32-bit version of Windows, you might be able to run your 16-bit program in compatibility mode. It depends of course is the compatibility with Windows 7. Some work and some aren't. The limitation with the 32-bit version is that it supports more than 4 GB of RAM.
Good luck.
-
Where can I download Apple Software Update for Windows 7?
Where can I download Apple Software Update for Windows 7? When update to iTunes, it appears "there is a problem with this Windows... "and I tried to fix Apple Software Update, but cannot find the .msi. file, I need to install it again.
See this tip for the user of one of our colleagues in the community:
See you soon,.
GB
-
Laptop computer (NEC) designed for windows XP problem.
My aunt give me a phone NEC which is purchased from the Japan. It is designed for windows XP, now the problem is that my laptop does not work so what I did, I installed the windows 7 starter edition, it installed successfully but I can't put any hardware such as printers, Cam, USB, mouse, high connection throughput or even my helmet. I don't know what's going on, or maybe my laptop is really designed for windows XP. I need help, what I really need to re install Windows XP? or there is a way to solve this problem. Thank you
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, LAN, Audio, USB, SATA, etc, and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsJ W Stuart: http://www.pagestart.com
-
Original title: download spp.dll
My SPP.dll file is 0 kb. When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.
How can I get another spp.dll file? I can download one from the internet. I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.Try to run the System File Checker:
-
How to run programs designed for Windows 3.1
How can I get vista to rum a program designed for windows 3.1
How can I get vista to rum a program designed for windows 3.1
I found 2 sources of information for your question:
1. it is a tutorial from eHow:
How to run Windows 3.1 on Vista
http://www.ehow.com/how_6915732_run-Windows-3_1-Vista.html2. it is a response dated October 6, 2010, this MS Answers forum.
http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/caa2cea4-9088-42f7-BDA4-1da12cc667ecI have no technical knowledge of the object. Simply provide references.
If you have any other questions, you will have to wait for the experts. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
I don't really have much to say... ive got 64 bit and ive tried almost everything I can. Some examples of what I can't install that are designed to work for it: itunes, logitech g19 keyboard drivers, Alex Feinmans iso recorder. also one of my cd drives doesn't let me do anything, like install stiff from a disc or copy a cd, if theres encryption at all. my other cd drive not... Skype does not, or ventrillo. Steam and all games run so far, and crysis works but its editing tools only and designed for 64-bit only. I don't like windows 7 and I do not think that its faster, but what's the point of speed if I can't run anything?
Drivers are specific, because 64-bit drivers are needed for 64-bit and X 86 (32-bit) systems drivers for this type of system. X 86 applications run well on 64-bit if it does not involve drivers and software. You seem rather unlucky or unhappy. What could have been encrypted by another user on another machine will most likely depending on what type of encryption, you talk about the problems.
Often the trick to get installed programs is to right click on the configuration file and select the "Run as Administrator" option. Another often overlooked trick is to disable temporarily the scanner in time real and other similar programs during installation.
32-bit and 64-bit Windows: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspxHow to troubleshoot a program that does not run as expected once it is installed on Windows Vista
http://support.Microsoft.com/kb/931362/en-usMake older programs in this version of Windows
http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspxWindows Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/details.aspxWindows 7 Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxWindows 7 Upgrade Advisor
http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=enVirtual PC 2007
http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en&TMWindows Virtual PC
Download Windows XP Mode
http://www.Microsoft.com/Windows/Virtual-PC/Download.aspxWindows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."
-
Hello, I bought a MS Keyboard with Finger Print Reader (product ID: 75913-545-1980296-00611) recently of a *. May Hae product on a shelf for some time. I have Windows 7 on my PC and the instalation software says it's incompatible. Have you folks instalation software compatible for your product? E-mail address is removed from the privacy * I am a technician certified a +. If you could direct me to the right site with the appropriate software, or email it to me, I would appreciate it. Thanks for any help you can give. Sincerely, Frank Nunally
Hello, I bought a MS Keyboard with Finger Print Reader (product ID: 75913-545-1980296-00611) recently of a *. May Hae product on a shelf for some time. I have Windows 7 on my PC and the instalation software says it's incompatible. Have you folks instalation software compatible for your product? E-mail address is removed from the privacy * I am a technician certified a +. If you could direct me to the right site with the appropriate software, or email it to me, I would appreciate it. Thanks for any help you can give. Sincerely, Frank Nunally
This is a forum for peer-to-peer and this product is not compatible with Windows 7 - so - don't. Microsoft is not what you need. Should have read the list of compatibility (operating systems) probably printed on the box.
But be sure to check here:
http://www.Microsoft.com/hardware/en-us/support -
OKI C9300-PRINTER-COLOR - NEED SOFTWARE + DRIVERS FOR WINDOWS 7 + 8
I have the opportunity to buy a very good second hand (model year - 2002) OKI C9300 printer. It comes with its original software. However, it is not compatible with windows 7 (on my laptop) or windows 8 on my PC. I tried to download the updated software, but my computer skills are limited and have been unsuccessful in getting to save and install so that the printer can be upward and running. I called the OKI people in SA but at the point where they settled the problem/s, I'll be bankrupt. Can you help me please? the version of the software that came with the machine is V 1.0
MODEL:
printing size OKI C9300N - MULTI COLOR PRINTER (up to A3).
YEAR MODEL: 2002
PRODUCT KEY: Not sure if she has one that I can not find such a description in the original box, manual or machine.
WHAT I THINK I need TO GET running MACHINE (ready to print) IS THE FOLLOWING:- Update of software.
- Product key if required.
- The correct drivers.
New cartridges have been replaced and therefore has the image drum.
The printer switched on displays the following message in the display window: SERVICE CALL 020: ERROR parts ONLY what exactly that and or?Help, please!
Concerning
BenHi Benjamin,
Method 1:
I suggest you try the steps from the following link:Why can I not print?
http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print
Method 2: I suggest you try to install the drivers in compatibility mode for Windows vista from the following link:
http://www.Oki.co.UK/support/printer/printer-drivers/results.aspx?ProdID=TCM:122 - 3583 & search = 2
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
Note: Alternatively, you can try to install the drivers for Windows vista on Windows 8 compatibility.Post us the results once you try the steps above.
-
Full software functionality for Windows 7 missing functions HP2610
MFP HP2610, Windows 7
Installed last full feature printer software from HP website.
Problems:
1. I wanted to send a fax from the computer but couldn't find controls cover page to put a message on the cover page.
2. There is no Preview Fax button.
3 quality fax options are low, medium and high, but not the quality picture, even if assistance says there should be a Photo quality option.
4. how to import addresses? Aid is said to use the address book in Internet Explorer, but IE is not an address book.
It tells me that the Windows 7 driver for this printer is very disabled compared to XP driver that has these features. HP Director software which is running XP is also unavailable, is there a download for HP Director?
Hello
Some of the features HP full feature has changed:
Regarding your 1st question, the page function Fax coverage provided is no longer, since version 7 of the HP Solution Center software.
Overview of Fax option is no longer available for newer models with the center of Solutio HP as well.
So, by testing the newer models, the highest quality of Fax listed as high.
As for question 4, the address book relies on Windows Contact:
- Click the Start button
- Type of Contacts in the search bar, you will find the Contacts application
- Follow these steps to import contacts:
http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts
HP Director is not compatible with Windows7, the HP Solution Center is the only version available for your printer for Windows 7.
Kind regards
Shlomi
-
Download Simple col 2012 software HP for Windows 8
Model number: HP Pavilion DV6t-A1U55AV #AVA
OS: Windows 8 Pro
I need the software HP Simple pass 2012 for windows 8 to use my finger with her print scanner.
Try using http://support.authentec.com/Downloads/windows/hpsimplepass.aspx
-
When drivers and software will be available for the all-in-one printer HP Deskjet F375 for Windows 10?
Current software and drivers for F375 on HP downloads (updated August 28, 2014) are for Windows 8 will not install on Windows 10. HP Solution Center will not work.
This printer is listed as compatible Windows 10. What happens when you try to install io? Have you tried to use the Printer Wizard?
-
Issue download and install the software driver for Windows 7.
I use the HP Compaq dc7800 Small Form Factor and p/n AQ532US #ABA and Windows 7 Home Premium x 86 SP1, where can I find and download and install the driver software? I did check on hp.com but this isn't list full driver for Windows 7 Home Premium SP1 of x 86 software.
any ideas?
I appreciate it
If you go on HP.com, driver and software downloads, the site is able to scan your computer and display all drivers available for your machine. What drivers are you looking for?
Maybe you are looking for
-
iMac used to work... macbook pro for personal use. This weekend I noticed the list of bookmarks on macbook has been reduced to almost nothing and was not what was there anything I used normally. Report to work this morning and the same list of bookma
-
So today, I decided to upgrade my firmware to the latest 9.3.2 via iTunes 9.2. Everything was fine. Both PC and iTunes recognized my phone and the upgrade process was fine, until suddenly I'm met by a mistake to say that the update failed, which was
-
Chicony camera does not work.
Original title: Camera Chicony I have the version 1.1.0.216 Chicony Webcam file that does not work... What do I do?I tried to find a download for it & can not find... Please help!
-
Error of the bad image when opening certain programs such as iTunes and Avast
I have a computer that is running Windows XP and I recently had this problem occurs: when I try to open certain programs I installed (itunes, Avast, etc.) and a message appears saying 'bad image' followed by the name of the program. He also says to c
-
I'll put up ASA5540 for remote access VPN in my LAN. The tunnel between customers and ASA is successfully established and the client is assigned an ip address. The problem is that I can't access any resource in my local network despite the privilege