Compatibility problem - Windows 7 with WS7 and HP Connection Manager 3

Similar Questions

• compatibility problem windows 7 64 bit and highway europe 2007

  This has been raised before but I can not get this program to run.  I've used it on my desktop with xp and it works well.

  I have two identical laptops & this program installs but then nothing more than 1st page. In the compatibility section it says "incompatible application detected."

  The other message when it runs the solution etc is "your registry settings for this application were not copied correctly run Setup again for this application from the location where you originally installed it.

  I have uninstalled & reinstalled on two laptops

  I did a selective startup, two items are grayed out. Load system services ad use original boot can not remember loads 3 letters

  all to nothing does not

  http://support.Microsoft.com/kb/2643882

  All - see this link for a fix for the 2007 App highway crash on the start screen.
  I confirm that this works on Windows 7 SP1 x 64.
  Diagnosis to sort...
  Step 4 step 5 shown here...
  http://kbAlertz.com/314590/error-registry-information-copied-correctly-during-installation.aspx
  .. then applied the fix for link at the top of this post.

• compatibility problem windows 7 64 bit and avast antivirus

  When installing the avast pro antivirus, when the computer restarts a blue screen appears and I have to uninstall the avast to have access to my computer again... and this happens also with avg

  When installing the avast pro antivirus, when the computer restarts a blue screen appears and I have to uninstall the avast to have access to my computer again... and this happens also with avg

  Since it is the responsibility of Avast or AVG to be compatible with Windows, you need to consult the FAQs Avast or send a note to the Avast helpdesk.

• I have windows xp with SP3 and I need RDP 6.1.7600 with NLA. I had installed KB969084, but is not

  I have windows xp with SP3 and I need RDP 6.1.7600 with NLA. I had installed KB969084, but this isn't updated the RDP version. Can anyone suggest?

  Hi Prashant,

  Create a system restore point before you follow the steps mentioned below. You can check the link for the steps to create a system restore point: Windows XP system restore is easy to use: http://www.microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx

  1. Uninstall SP3 on your computer. Link to see: how to remove Windows XP Service Pack 3 from your computer:http://support.microsoft.com/kb/950249

  2. then install desktop connection remote (Terminal Services Client 6.1) for Windows XP from the link below:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=6e1ec93d-bdbd-4983-92f7-479e088570ad

  3. Once installation is complete, you can check the results.

  Reinstall service pack 3 on your computer from the link below:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can someone tell me if I should delete the following startup programs for Windows 7: customer ComcastAntispy and FlexNet connect?

  Can someone tell me if I should delete the following startup programs for Windows 7: customer ComcastAntispy and FlexNet connect?  I have read several articles and most of them say that I should remove.

  Original title: startup programs in Windows 7

  They are third-party programs and only you can know if you need and uninstall, if so

• Compatibility of Windows 8 with Age of Mythology and Titans

  Bought a new laptop with Windows 8 preload.  The only thing I use the laptop for is to play Age of Mythology and it does not work.  Looked like all the forums for corrections and Windows 8 seems to be preloaded with DirectX11 and all the correct s/w but still the "Initialization failed" error at startup.

  Is there a version of patch to fix this?  Otherwise anyone who upgrades to the new sys Op MS will have this prob.

  Hey Loren,

  Microsoft Age Of Mythology: Titans is not compatible with windows 8. Then I suggest to install the game in compatibility mode and check if it helps. Here is the link that tells you about the incompatibility of the game with Windows 8.

  Windows Compatibility Center

  Follow the steps to install the game in Compatibility Mode:

  a. right click on setting up the file, then select Properties and then tap or click on the compatibility tab.

  b. check the box run this program in compatibility modof e.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  See the article for more information.

  Make the programs more compatible with this version of Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Activation of Windows 7 with bootcamp and virtualbox problem

  How to correctly activate my Windows 7 Professional works on two different configurations. With Bootcamp and Virtual Box? This used to work great until an update does not allow me more. I have it setup where I can boot into parrel with my mac or by itself with bootcamp.

  Any ideas? Thank you

  You must have separate licenses for two instances of Windows 7 Professional. Both facilities are considered to be different computers. The VM (VirtualBox) and BootCamp are regarded as separate computers.

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• IE is slow, hangs in Google, will run Firefox under Windows 7 with speed and security?

  I'm not very tech savy English so good please. I have a desktop Dell Studio with Intel 2 Quad Processer. I have used IE for 15 years and more. Started using Google Chrome for speed and better security about 6 months without any problem. Shortly after the beginning of the year Chrome started crashing every day and from 1/14 he broke the 10-12 times a day. I don't like losing stuff and having to stop, re - load, raise or re-store that Chrome was more than that was working properly.

  Will Firefox work in my system operating system. I loan on your security, password protection and other things that are touted on your website on Firefox, but I'm mostly concerned about accidents and what are the causes. Is the problem in my own system and not questions of brower?

  I just want to surf, read, watch you tube, facebook with friends and family. I am 65 years old and retired, and I'm really disguested with all the problems I encounter.

  I think Firefox is a good product, but I need answers to the questions I asked.

  We hope to hear from someone very soon on the issues that I raised. If I download Firefox, should I uninstall IE. I already have an installed Chrome =.

  Thank you
  Jim Yeary
  jyeary3 @ spring TX

  I do not know what is causing your Chrome or IE falls down, but you can give a Firefox. I'll give you a few different things you need to do before installing Firefox to make sure that your computer works well if.

  Install all Windows updates. Check several times until there is no more.

  Update your graphics Driver. Update your graphics drivers to use hardware acceleration and WebGL

  Scan of malware: troubleshoot Firefox problems caused by malicious software

  Once you have done this, install Firefox! How to download and install Firefox on Windows

• Problem Windows install with Java

  A few days ago the Java (TM) automatic update for Windows Vista has started and I accepted and allowed him to install. I allowed the installer through my firewall, I use COMODO Firewall and the installer came to fine and started to install. Well well, not too long after it starts, maybe... 15 seconds, the installation ends and comes with a Java error, but also a Setup error indicating that there is something wrong with my Windows Installer. I have no idea how to solve this problem, nothing helps, I don't know what version I have, and I see is Windows Installer 4.5 and many other things that do not seem to resemble each other, they will work. Please help, I can't some uninstalled programs or installed because of this. Thank you.

  Hello

  Try this

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  and if any;

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  --------------------------------------------------------------------

  Do with these two

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close IE

  Then use Revo to uninstall Java, so you can reinstall - free Version
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Reset.

  Now go back to Java and reinstall
  http://www.Java.com/en/

  ----------------------------------------------------------

  If so - get something contradictory and reset IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Update of Java (besure to go back and disable SSV2 Addon)
  http://www.Java.com/en/

  What antivirus/antispyware/security products do you use? That were ALREADY on your computer
  as remnants can cause strange problems.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• PROBLEMS OF VISTA WITH WORD AND EXCEL

  I'm having problems with microsoft word and excel.  I get the following error message:
  

  "Host process for windows services stopped working and was closed.  Wiindows will notify you if a solution is available. »

  Of course, I never heard with a Windows solution.

  •   

  Hello SAFEERN,

  It may not be a problem with Word or Excel.

  Read the article here mentions several problems that can cause the error "host process for windows services stopped working and was closed".

  Please answer back with an update so that we can know if one of the resolutions helped to solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry smartphones "BOLD" problem Calendar Sync with PocketMac and Desktop Manager 4.6

  # The RIM case: 5499753

  I have 4 email addresses attached to my BB "BOLD".
  When I go into Options / Advanced / Default Services / calendar, I have 4 entries (all e-mail addresses).

  If I go to calendar, Options, there are all of an additional entry in "Default device" 4 as well as e-mail addresses.

  Regarding the calendar by address entries, it is divided as follows:

  Email 1) 1
  E-mail 2) 0
  Email 3) 50
  Default device) 38
  Email 5) 0

  When I try to synchronize, the desktop software sees only the #3 email that is my rogers.blackberry.net with 50 entries and sync in Outlook, resulting in a loss of events in my Outlook on my desktop. All events are still in bold.

  I can not also move all the elements of the default device and assign it to the category E-mail no. 3, which reduced from 38 to 37 and from 50 to 51.
  Once you have received an entry on the device, you cannot change the e-mail addresses associated with the event.

  Removing the servicebooks (CICAL all) the default device entry has the combined entries.

  Once the service books are sent to the device, it then splits them again.

  This seems to be a problem with the Blackberry "BOLD" operating system, or a problem of service book (since when CICAL service books are deleted, calendar entries all combine for peripheral list by default.)

  This also happens on WinXP with 4.6 DM, is not platform specific.

  OS: 4.6.0.125 & 4.6.0.134 tempted.  Both have the same result.

  Just got off the phone with RIM support.

  Here is the procedure:

  All backup data

  Do a thorough cleaning (Options, Security Options, General settings)

  Content compression set to disabled

  Save the settings

  Return to the General settings, Blackberry press button and wipe Handheld.

  Load DM and go to the backup/restore, advanced.

  Load your backup file.

  Restore only the peripheral calendar (drag the calendar on the right)

  You should be able to see in the calendar options, device default calendar with all the entries.

  Synchronize in Outlook.

  At this point, you should have all your entries in Outlook.

  Hard Reset (press left ALT + SHIFT RIGHT + DELETE and hold the button until it restarts the device)

  Go to the website of your provider BIS and remove all the entries that you want as the default calendar.

  Set the date and time on the device.

  Turn on the wireless Radio

  Return Service directories from the BIS website.

  Go to Options, advanced, default Services.

  Set default CICAL (this should be the one you really want to like the calendar by default and the only one on the device).

  Set the default CMIME if necessary.

  Add the e-mail addresses that you deleted on the BIS website.

  Return service directories.

  You should have all your e-mail addresses and no. peripheral in your calendar, by default.

  All entries in the calendar should be associated with the address you chose as the default value.

  Resync using DM.

  Note - PocketMac 4.1.25 is not supported with the "BOLD".

  This creates blockages and major sync issues.

  I have run this procedure from a computer running Windows XP with Office 2003.

• HP Jet 11-D007NA: How do I copy and paste in Windows 10 with left and right keys

  Hi Everyone,                                                                                                                27/08/15

  I know the c control and control functions v for copy and paste with Excel and Word. How do cut you, copy, and move entire folders when you are working in Windows 10? 2 tapping fingers at the same time used to work in point 8.1 of Windows but does not work in Windows 10. I want to move my documents together and download files from my drive c on a memory stick that I have only 32 GB SSD in my book and it is fill up very quickly. I don't want to lose days copy individual files and sticking them in the memory stick. That would be a common mistake. I don't understand why HP had to remove the left and right buttons and make life very difficult for its customers. They probably saved a couple of hundred by getting rid of the buttons in their calculation of costs, but made it impossible for customers to use the laptop in a productive way.

  Vijpat10

  Have you tried pressing the right and left of the touchpad corners? Most of the models without physical buttons have this function.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• Passport problems of blackBerry with date and time on the passport of Blackberry

  Hello!
  I have problems with my passport for Blackberry.
  For the couple in a day time, it changes itself. So my hub doesn't work, I get no new messages, I can't send messages! The last time I did correct settings did not help. If everything is correct or hub or messages do not work. I tried to make different adjustments, tried to restart the hub, tried to restart the phone. but it does not work. I really need your help because I can't use my phone and nobody can connect with me.
  I didn't drop the phone. I know that these problems are related to the date and time because since the first problem with hub and messages has occurred, I saw that the date and time were bad, changed to correct and everything went well. I don't understand why he doesn't now. Can you tell me what to do?
  OS 10.3.2.2836
  1 January, I received this phone and it worked allright until some of the OS updates, can't tell which exactly because I have auto update.

  For those who have the same problem: I deleted the contact of my mother on the phone. I deleted the messages displayed as January 27, then I added my mother to local contacts and new messages started coming

• Problem of UK with ASP and Access database date format

  I have an Asp form that updates of the records in a database Access. It comes
  the date of the registration of database format is dd/mm/yyyy (UK), when
  the folder is displayed in the form, it is mm/dd/yyyy (US) who, after I
  update the record in the database, the date has changed to the new format.
  
  I tried everything I can to change the format
  vain... someone at - it any ideas how I can fix this?
  
  
  Thank you
  Steve
  
  

  Stevo.s wrote:
  > Hi
  >
  > I tried to change the format on the date field on the server behaviors
  > panelto DDMMYYYY. Also have tried to define the field of form DDMMYY format. I have
  > also tried to use a function that I got from a somehwere to post on the net or not
  > avail. < %="" fonction="" ddmmyyyy(vardate)=""> < br=""> > DDMMYYYY = Day (DateValue (varDate)) & "/" & Month (DateValue (varDate)) < br=""> > & "/" & Year (DateValue (varDate)) < br=""> > end function < br=""> > < br=""> > I believe that it is a problem with Dreamweaver and access but < br=""> > can't seem to grasp her work around! Problem being that I teach myself through < br=""> > books and internet articles and can take weeks at a time without being able to < br=""> > watch question... whenever I come back to it, it's like start all over < br="" >="" >="" nouveau !="" j’espérais="" que="" quelque="" part="" de="" sortir="" là,="" il="" y="" a="" une="" solution="" simple="" le=""> < br=""> > may deliver a datePicker with the built-in functionality to address the < br=""> > question... I am wanting to understand how to deal with the issue rather than simply < br=""> > change my date field of database to fudge the issue that I'm in England and when I < br=""> > eventually start using the application, I wish there is some < br=""> > coherence with the dates of arrival and that users are familiar with the format. < br=""> > < br=""> > any help gratefully received!

  Its not Dreamweaver, or access, its your settings regional servers, his game to the United States < br=""> format, not in the United Kingdom.

  On your page at the top of the page using:

  < %="" session.lcid="2057" %="">

  This will force the page using UK format dates. Use it on any
  page to format the page correctly.

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html