compatibility problem windows 7 64 bit and highway europe 2007

Similar Questions

• compatibility problem windows 7 64 bit and avast antivirus

  When installing the avast pro antivirus, when the computer restarts a blue screen appears and I have to uninstall the avast to have access to my computer again... and this happens also with avg

  When installing the avast pro antivirus, when the computer restarts a blue screen appears and I have to uninstall the avast to have access to my computer again... and this happens also with avg

  Since it is the responsibility of Avast or AVG to be compatible with Windows, you need to consult the FAQs Avast or send a note to the Avast helpdesk.

• Compatibility problem - Windows 7 with WS7 and HP Connection Manager 3

  Hi all

  I hope someone can help me. I have the following configuration:

  Laptop HP 8530w

  HP un2400 builtin Broadband Modem UMTS

  Windows 7 Professional x 64

  VMWare Workstation 7

  My problem is that the HP Connection Manager 3 for the HP un2400 doesn't work anymore after installing VMWare Workstation 7. I'm unable to connect to a UMTS network because the connection manager think, for vmnet1 and vmnet8 virtual network cards are online an internet connected.

  I tried to disable the virtual networks through the VMWare Network Editor. I can't disable the adapter, but when I apply the settings, the GUI is suspended.

  I need to uninstall the HP connection manager. After that, I am able to disable the cards.

  But ultimately I need for my work, the vmnet1 + 8 adapters on the host and Manager of HP connections.

  Does anyone have similar problems?

  Thanks for your help

  Kind regards

  Chris

  Well,.

  I did some more tests. I changed the startup type of the service USB arbitration for the delayed start.

  It works for me. Active delayed start the connection manager load the firmware of WWAN cards before USB arbitration service is embarrassing. The only condition is that the connection manager must be loaded at windows startup.

  Kind regards

  Sander

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I'm on windows 7 64 bit, and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and disappears later

  I'm on windows 7 64 bit and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and then disappears. I did some research and found that the default theme is the cause. I installed a different theme and the problem goes away and that's why I don't know the root cause. Anyone with ideas on how to solve this problem? I like the default theme!

  Try to uncheck the box next to 'use acceleration hardware when available' in the Options. Worked for me!

• Windows 7 (64-bit) and 5.2 of NI-Visa

  Hello

  I use Windows 7 64-bit and has just installed TS/LV2012 and NI-Visa 5.2

  Then I started MAX and that you want to add a new instrument of TCPIP, but it says: "NI-VISA is not installed on this system or NI-VISA does not support the creation of new resources on this type of system.

  So I wonder: neither Visa 5.2 is not compatible with Windows 7 64 bit? Because on the site, it is only "WIndows Vista" in the product description.

  Thx for the help

  Additional information: TS/LV is installed on a WIndow7 that runs in a VirtualBox Image. This can be also a problem?

  His works now.

  After I've run all Windows updates in the VirtualBox the VISA was also Max.

• Running Windows 7 64 bit and trying to install a software - error 80073712

  Running Windows 7 64 bit and trying to install C++ 2005 redistribution (x 64).  It is required by another application.

  Produces the following error:
  Product: Microsoft Visual C++ 2005 Redistributable (x 64) - Error 1935.An error is generated during the installation of assembly ' Microsoft.VC80.ATL, type = "win32", version = "8.0.50727.762", processorArchitecture, publicKeyToken = "1fc8b3b9a1e18e3b" is "amd64" '. "
  See Help and Support for more information. HRESULT: 0 X 80073712. assembly interface: returned IAssemblyCacheItem, function: commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} (NULL)

  80073712 is that the message above suggests by http://support.microsoft.com/?kbid=947821 that "the component store is in an inconsistent state."  And if I look at the CBS.log newspaper as suggested, I see many messages that
  "2010-01-03 06:28:38, CBS News could not get the CSI store. [HRESULT = 0 X 80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
  2010-01-03 06:28:38, error CBS was unable to initialize the store with the boot drive settings: directory and windows: [HRESULT = 0 x 80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
  2010-01-03 06:28:38, d:\w7rtm\base\wcp\componentstore\storelayout.cpp(6636) 00000087@2010/1/3:13:28:38.200 (F) CSI of the error: error STATUS_SXS_COMPONENT_STORE_CORRUPT from the ComponentStore::CRawStoreLayout:OpenCanonicalDataKey expression function: (null)
  [gle = 0 x 80004005] »

  At this point, most of the patches for this is made related to Vista and I tried to use or adapt without success.  Suggestions?

  Windows Update is not your problem, even if you've upgraded to Win7 64-bit. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads

  Good luck!

• I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

  I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

  I did several tests, including
  ping google.com
  to test if it is online and this proves that when its premises in sound mode now online
  I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
  my antivirus is AVG
  AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
  can anyone help
  ?
  original title: network adapter shows onffline but it is online

  Hello

  You can try to uninstall and reinstall the network adapter.

  To do this follow these steps:

  1. click on Start, in the Start Search bar type device manager and press enter.

  2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

  3 restart the computer once the uninstall is complete.

  4. after the computer restarts, it will automatically detect and install the drivers.

  5. check if the problem is resolved.

• Install Windows 7 64 bit and Vista 32 bit on the same drive

  I have Vista 32 bit installed on my laptop. Media recovery is on a recovery partition, I have no recovery DVD such as $85 for something that should be included with my expensive laptop anyway, it is a bit much

  I have a drive to upgrade Windows 7 from my laptop manufacturer that allows me to each upgrade or to start from scratch.

  I want to install Windows 7 64 bit on a separate partition for the installation of my 32-bit Vista, but when I boot on the DVD there is no option to select the 32 or 64 bit, it only allows me to install the 32-bit version. I have partitions installed correctly then they arnt the problem. If I try to boot from the recovery partition to install Vista 64 bit on a separate partition, to upgreade can leave, he simply don't say so, it doesn't allow the recovery or replacement of my existing Vista installation. Also, often when I boot to recovery mode, by organizing 0 start up, he simply waits some time and the Vista of boots in any case.

  How should I do to dual boot Windows 7 64 bit and Vista 32-bit, as all possible ways I have tried do not work, and I can't afford to buy the madmen of... Toshiba recovery media ?

  The 'disc Windows 7 from the manufacturer of your laptop upgrade' can be used to improve the qualification system of operating from 32-bit of Windows Vista that was originally installed on the laptop.  It cannot be used for any other configuration or purpose. Carey Frisch

  Actually, this isn't just a "upgrade drive" it's a full disc of Windows 7, I know that I can install full Windows 7 32 bit in a separate partition for Vista.

  The problem is solved in any case, I managed to hide my Vista (C) install with Acronis and boot to the WIndows 7 DVD. It then allowed me to install Windows 7 64 bit on the other Partition, because he did not think that 32-bit Windows Vista has been installed on the HARD drive. I managed to deceive it by showing the menu options of 32 bits or 64 bits in this way... I assumed it was a protection system put in place by Microsoft to stop upgrade problems if soemone tried upgrade Vista 32, Windows 7 64

  Now under Vista 32 and Widnws 7 64 on the same computer.

• My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and my computer Gateway Laptop windows vista 32 bit operating system

  My canon EOS 20 d is not detected by my computer lenovo, OS Windows 7, 64-bit and Gateway laptop with Windows Vista 32 bit operating system.  This means plug-and-play is not available or does not so I have to use for my compact flash card reader to transfer pictures.  I've already updated the firmware by downloading the upgrade of the Canon website.  I tried to turned touble this problem following what is suggested in the Canon Website, and still the problem is not corrected.  Thank you.

  Hello

  Follow the steps mentioned below and check if the problem persists.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can also try to connect the camera to a different port and check if it helps.

  Method 3:  You can also try changing the normal mode to print/ptp in camera mode where you can print directly from camera by connecting printer directly using the usb cable.
   
  Hope this information helps.

• Windows Media Center has stopped to display images. I am running windows 7 64 bit and the photo folders are visible but empty.

  I am running windows 7 64 bit and just recently I cannot see my photos in media center. Show folders that contain pictures, but they are empty. Also, I went to the folders in my computer and tried to open some of my pictures with media center, and they will not open. This is something new because I've always been able to see my photos in Media center. Everything in Media center works great.  Help

  Hello

  1 have you ever done any recent hardware or change the software on the computer before this problem?

  2. the functions of Windows Media Center are intact?

   

  Method 1:

  First upward, to try and perform a System Restore to a State previous when the Windows Media Center worked very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

  Method 2:

  Turn off the feature and reactivate it:

  a. click Start, type appwiz.cpl and press ENTER.

  b. in the programs and features window, click enable or disable the functionality of Windows in the left navigation pane.

  c. find the Windows Media Center and uncheck the option.

  d. restart the computer.

  e. navigate back to the same location and activate the option back.

  Method 3:

  Refer to this link to learn more about,

  See the photos and videos in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

  To troubleshoot issues with images and videos in Media Center show,

  Working with pictures in Windows Media Center: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

  Method 4:

  Reregister the following files.

  a. close Windows Media Center.

  b. click the Start menu, type cmd.

  c. right-click on the cmd option in the start menu and select run as administrator.

  d. type in the commands one by one by and press ENTER after each one.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  e. restart the computer.

  f. restart Windows Media Player and see if the problem persists.

  I hope this helps!

• Program compatibility with Windows 7 64 bit p2p Application ares

  HYA... Ive just installed Windows 7 64 bit and have installed ares p2p. !  (2.2)... Im having a problem of incompatibility. Can someone help me please.

  Hello

  1. what exactly happens when you try to start the program Ares?

  2. you receive an error message?

  According to Ares Ares 3.1 site is compatible to work with Windows 7. I suggest that you download Ares 3.1 from the link provided below and check if the problem persists.

  http://aresgalaxy.sourceforge.NET/

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  On Fri, September 14, 2012 03:06:02 + 0000, MerrellWilson wrote:

  It's 74GB and I used 73 GB

  Two points:

  1. If you want to delete some installed programs, do not make
  deletion of the folder they are in. That doesn't remove them only partially and
  can cause problems. Remove programs by in control
  Configuration/program Panel and features.

  2. a drive of 74 GB is a tiny disk these days. There are a number of
  things you can do to save space, but they are all basically
  temporary and you will soon find yourself in the same situation.
  The only real solution is to buy and install a larger capacity drive.
  Fortunately, they are very cheap these days; You can buy a 500GB
  drive for about US $65.

  Ken Blake, Microsoft MVP

• I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the

  I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.

  Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you

• Windows Vista 64-bit and button Support - Qosmio G30?

  Windows Vista 64-bit and Support Button?

  Hello buddy

  What do you expect now after writing this fabulous issue?
  Don't you think that someone will take you seriously?

  Just a tip: If you want to ask something to let people know what model of laptop you have exactly. All laptops are not supported for 64 bit Vista operating system.