Compatibility with the CWDM module

Similar Questions

• Satellite A-C55-1JL - compatibility with the ram module

  I want to upgrade the RAM in my Toshiba C55-A-1JL. Standard module is Hynix PC3L bitensión 4 GB. But on the slot, I saw the text "1.5V. I bought the 4 GB of Kingston module with identical parameters as Hynix module, only the voltage is different. Kingston module is only 1.5V voltage.

  My question is: what voltage supports the mainboard that laptop? Can I use this add-on from Kingston with original Hynix ram module?

  Standard module's voltage Hynix PC3L

  This means that the module supports 1.35v or 1.5V

  Can I use this add-on from Kingston with original Hynix ram module?

  In the worst case if you use the not entirely compatible RAM module, the laptop does not start up... try it

• Software that has a compatibility with the windows operating system 8, applies to windows 8.1system automatically?

  I just want to know when you buy a software that has a compatibility with the operating system windows 8, applies to windows 8.1system automatically?

  Former title: compatibility

  Yes, he does.  Windows 8.1 is compatible with Windows 8.0.  In fact, it can run almost all programs built for 7, Vista and XP as well.

• My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

  My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?

  I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.

  I disabled the Nvidia because it seems to me that Photoshop is not supported.

  Hey Mohit and other colleagues!

  See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

  I hope that helps for a while this problem.

  Best regards.

• Dreamweaver MX 2004 compatibility with the latest versions?

  Dreamweaver MX 2004 compatibility with the latest versions?

  I have templates in an old Dreamweaver MX 2004 and want to update my software. Will I need to go step-by-step to a version a few years back and then run?  Or can I go completely aware?

  I also can't my old dreamweaver register more and they have NO support for it.  Clues?  It is legitimate one I have the registration number and all the same, but he won't take it for some reason any.

  Thank you for any support you can give.

  droopydrawers wrote:

  ... I also can't my old dreamweaver register more and they have NO support for it.  Clues?  It is legitimate one I have the registration number and all the same, but he won't take it for some reason any.

  MX is the latest version of DW which was created by Macromedia, before the Adobe acquisition. I do not think that it was never actually supported by Adobe, but definitely not now (I think that DWCS6 is the oldest version still supported). The activation of this program servers have long been extinguished, it goes without saying that the registration would be also missing.

  You might be able to use the trick here to activate if you encounter problems with this: error: cannot activate | Product Macromedia

• Inspiron 7348 2-in-1 compatibility with the 16 GB modules

  Does anyone have information updated on the compatibility between the 16 GB (as the indispensable CT204864BF160B) simple modules and the laptop 7348 2-in-1? Mine has a 5th gen CPU i7-5500U and is already updated to the latest version of the BIOS A08 published yesterday.

  

  Being a 5th generation Broadwell Intel Core 2 CPU, I think. It is compatible. Its price fell a few days ago at the level of US $ 100, which makes a nice and relatively cheap upgrade.

• Muse reactive compatibility with the BC e-commerce module.

  I'm trying to integrate an e-commerce of BC with a model created in Muse site, and it seems to completely disappear when reduce you it beyond the first point break.

  I've been searching in the code that is generated by both of them, and cannot understand what would be originally does not work.

  The same master page is applied to the other pages of the site, and they work fine... it is only when I insert tags BC that it seems to break.

  French Wire Earrings

  I wonder also if it is possible to do this job, can I then do the BC model individual expenses for the small portions of the layout were break points too?

  In an ideal world, they would have their own set of breakpoints that work within the page layout and master page.

  In an ideal world, Muse would download these directly and be aware of these incompatibilities little code, but I understand that it may take time to implement, and the Muse team had a lot on their plate.

  If anyone passes on this problem, here is the solution:

  While you can generate your models for the e-commerce BC module in Muse, you cannot use the stylesheets generated by Muse. You must copy and paste all of the relevant classes and ID in a custom, on the lookout for duplicates and their resolution style sheet by renaming, or simply get rid of them.

  You can erase parts of style sheets and they would work, but every time you re-released by Muse, you would also be re - generate these conflicts...

  In this case, my problem had to do with the Id of 'muse_css_mq '. This is used by the sensitive code to identify the css specific to that breakpoint.

  When you load all the style sheets that require different models nested to display a page of e-commerce site, you end up loading additional "muse_css_mq" ID, and giving the code incorrect values, causing the next stopping point to not display, where my white screen on everything, but the default breakpoint.

• Using instrumented hammer model PCB 086D 50 with the NI9234 module and chassis OR cDAQ 9188

  Hi all

  I need to try to shock with a PCB 086D 50 instrumented hammer hammer. I use the chassis OR cDAQ-9188 with the NI9205 and NI9234 modules. The hammer is connected to the NI9234 and accelerometers are connected to NI9205.

  When I test the modules in SignalExpress I get very good results for the dog, but the accelerometers are ok. Also, if I am controlled the hammer OR Max where I have the option to activate the IEPE the result is ok. In SignalExpress, I couldn't find the option to activate IEPE.

  I have no experience using software, but I started to learn. Does that mean that I need to program the system for my setup in LabVIEW? Also, the installer of the equipment makes sense, the modules that I plugged on the cDAQ can be used simultaneously? Should I have the additional device in order to use the hammer with cDAQ 9188?

  Thank you very much

  Emina

  You can enable IEPE in SignalExpress. Here is a configuration for a single power hammer and three accelerometers a 9234-related.

  

  You don't mention the model for accelerometers. They are also the IEPE sensors? If so, have what conditioning of signals you added before the 9205?

  The Assistant Sound and Vibration (built on SignalExpress) contains an example of Impact Test. The Sound and Vibration Toolkit comes with a sample project for the impact test. With free evaluation period, go ahead and look at how one of these examples is implementing the configuration and the triggered acquisition.

• NOR-DAQmx compatibility with the system in real time

  I try to use a time system 11 with LabVIEW Real-time. When I try to connect with the driver OR DAQmx, an error saying that the version of the NOR-DAQmx drivers are bundles with the one on the real time. I tried to use different versions of the NOR-DAQmx drivers that are available in the table of compatibility, but not those who worked. I have an old computer working with the same real-time system that uses LabVIEW 9 and has the driver NOR-DAQmx 9.3.5 f0 driver installed on it but I can't find the drivers on the web. What should I do?

  I am using LabVIEW 2015 in my current computer.

  Thanks in advance.

  Looks like you can just have a lag in the versions of software installed on your host computer and the target.  In order to deploy the code from your host to your target, the two must have corresponding to libraries of functions.  See this link for instructions on updated versions of the software on your target match those installed on your host computer, the wizard of the LabVIEW RT software.  If you have already done this, and it did not help, please provide a screenshot or error code of the message that is to appear.

• Windows 7 compatibility with the old game

  I used the resolution of compatibility issues in Control Panel to install my old pc game (cake mania 2) it installs and the game plays fine until I have shut down the game and try to reopen it. The convenience store said detected incompatible application.

  the programmer of the game say they're working on an upgrade to it. but do not know when it will be available.

  What don't get me, is why he runs very well the first time. I can even uninstall. reinstall it with the convenience store and my saved game is still there, and the game works perfectly until I got close.

  I am confused? Any ideas?

  empony

  Hi empony,

  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Download and install the Windows Cleanup utility to uninstall the game completely from the computer, and then start with a new facility.

  http://support.Microsoft.com/kb/290301

  Once done with the uninstallation, you can install the game in Compatibility Mode and check if it works very well.

  Access the link below to install the game in Compatibility Mode.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  Also, make sure that you temporarily disable any Antivirus software on the computer.

  Make sure that you enable the security software after the attempt.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft technical support can't help you with the faulty Modules Installer.

  I have pleasures with support by e-mail dated December 18 and the subject of some updates that caused the Windows Modules Installer to stop working.  Here are the steps that have been taken so far:

  1. reboot the failet installation service.

  2 direct download of Trustinstaller.exe and Trustinstaller.reg.

  3. transfer of support tech System Info of MSINFO32.

  4 Indentifcation updates specific causing the crash of the installer of Modules and make a direct download of them.

  5 reset Internet Explorer options and disabling third-party browser extensions.

  6 direct download of the tool.

  7 supply tech with screenshots of SFC.exe and CheckSUR.log.

  8 run the SFC/scannow command to request of the tech.  Error message received after scan 25% over that he can't finish.

  9. made by tech to perform an in Place Upgrade of my installation disks.  Update could not happen due to Windows PowerShell.

  10. made by tech to remove Windows PowerShell via "Turn Windows features on or off."  Error message that PowerShell cannot be disabled.

  11. realized by tech to modify the registry to disable the PowerShell.  In Place Upgrade always reports installed PowerShell and would not continue.

  12. looked for Windows PowerShell among the "installed updates".  There is no update labeled "Windows PowerShell" listed.

  So that is where I am now.  Windows Update did not work except for the occasional definition for Microsoft Security Essentials update since mid-December.  No security updates or patches cannot install properly by the installer of Modules of Windows crash.  I can't repair my installation of Windows because I can't uninstall Windows PowerShell.  If someone is able to help, please keep in mind that I read all the posts about how to uninstall Windows PowerShell through the registry and installed updates; None of them have worked for me; so please don't cut and paste these instructions again.

  Thanks to anyone who can help me.

  System information: Windows Vista 64-bit, SP2 top Home.

  And you were right: a trial version of Norton is installed.  I'm going to grap the Norton removal tool now.

  You should have uninstalled Norton free trialware, and then run the removal tool, BEFORE the installation of updates...

  Friday, January 21, 2011 18:59 [UTC], Robear Dyer wrote:

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application...

  That being said, you have to get SP1 is installed, and then a few prerequisite updates (e.g., KB955430;) KB947821) before Windows Update will offer SP2. See...

  Windows Vista service packs are not available for installation via Windows Update
  [was: Windows Vista Service Pack 1 (maybe not) available for installation from Windows Update and is not offered by automatic updates]
  http://support.Microsoft.com/kb/948343

• Is it possible to associate a Web application with the ecommerce module to allow members to set their own prices?

  I was wondering is it possible to take a Web application and use it to power the eCommerce module so that a member of a protected area can set their own prices?

  Ex: If a Member wishes to sell an article, they download the image, set their prices and click on submit and the element fills a list of feeds.

  Hello

  No, you can not do.

  You can have with a payment gateway seamless only web apps that can be presented and edited by members where they can set a price and sell these items to app web via a custom payment form, but this does NOT pass through the electronic commerce so no payment paypal for example, shopping cart etc well you can simulate your own it.

• Problems with the Dreamweaver modules being installed in Adobe CC 2014 - OSX 10.9.5?

  I tried to install two Add-ons (photo gallery for DW and Adv CSS Menu Light) for Dreamweaver CC 2014, but I get an error notification, stating that they are incompatible with the installed Adobe applications.  Two of these state modules they are compatible with Adobe CC 2014, which is what is installed.  I am connected with an administrator account.  File synchronization is activated.  I have Adobe CC Desktop App 1.9.1.474 which seems to be the latest version.  It is on an iMac 27 "mid-2011 running OSX 10.9.5.  All the updates of the system have been applied.  I tried uninstalling and reinstalling several times with the same result, add-ons on seven different computers of the same generation/image.  It is in a class.  Any recommendations on other things to try?  Any help is very appreciated!

  It turns out that we had a bad deployed package.  After pressing a packet update Dreamweaver CC 20141 (via Casper), us were able to get these add-ons installed.

• InCopy compatibility with the WorldTool for CS6 plugin

  We are a very small company publishes brochures in English and Arabic. For better workflow based on dropbox, we believe using InCopy for editing while our Art Director uses CS6 with the plugin "World Tool" (no, not the ME edition). So: (1) is the Incopy software available compatible with CS6? (2) is there a problem of compatibility using InCopy when the world tool is used to build the indd documents? Thanks for the tips! DietMare

  Download the demo and give it a try. You'll have a month.

• Adobe viewer compatibility with the Mobile Android... someone who knows?

  We created a digital magazine using Adobe DPS and deployed online here: http://www.thinkingtackle.korda.co.uk/landing.html (click on SEE under TTD3) to launch the online instead of the versions of the App version

  It should redirect to the mag live in Adobe Content Viewer...

  Works fine on Mac, PC, iOS... BUT no joy on the plethora of mobile we tried on...  Samsung Galaxy S3 and various other...

  Eager to understand the limitations or extent of the compatibility of the content Reader Adobe with Andriod mobile/tablet

  Can someone advise?

  Best

  Nick@code

  We supported with the new viewer native Android Smartphones since it was released in February. Go to http://appbuilder.digitalpbulishing.acrobat.com/ to build the new viewer instead of the legacy version that does not support phones.

  Neil