Satellite A-C55-1JL - compatibility with the ram module

Similar Questions

• Compatibility with the CWDM module

  Hello

  We have an old device 6513 with WS - X 6502-10GE and 10GBase-ER one module (not sure, but it seems that this module is WS-G6483).  10GBase-ER module is connected to CWDM-MUX-8 has. This device will be migrated to WS-6513-E with a WS - X 6704-10GE and XENPAK-10 GB - ER +. The problem is that I can't find any instruction (on the Cisco web site) it is possible to use XENPAK - 10 GB - ER + with CWDM Technology. I know as XENPAK-10 GB - ER + is module official replacement for WS-G6483, so it looks good, but someone can advice you to use XENPAK-10 GB - ER + with CWDM is possible?

  Any response is appreciated.

  Kind regards

  Zdenek

  Zdenek,

  The CWDM / DWDM transceivers are designed with optical components with a narrower range of frequency of use than a standard transceiver (like an emergency room).  If you were using a wideband WDM Multiplexer (2 channels, one at 1310nm and the other to 1550 m, ER transceiver could be used (although the link would be limited by the length of optical link supported by the transceiver 1310nm).)

  If your Cisco line cards support optical transceiver modules DWDM 10 Gbps, the range of products Enhanced Cisco Wavelength Division Multiplexing (specifically the EWDM-MUX8 = Multiplexer) may be the solution for you.  At that time, Cisco has no 10 Gbit/s CWDM optical transceivers.

  I hope this helps!

• Satellite A100-289 - does not accept the second module RAM

  Hello
  Sorry for my bad English

  I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

  [PC-information]
  Modellname Satellite A100
  TEILENUMMER PSAA9E-11H047GR
  Serial number 96304832Q
  BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

  Hello

  > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
  This means that you install RAM modules while the laptop is running?
  I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

  Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
  I have good experiences with the Kingston modules.

• Satellite Pro A200 - cannot start with new RAM

  I have two of these laptops, both purchased at the same time.
  I upgraded to 320 GB hard drive and tried to move the RAM to 4 GB as the spec States can be made.

  I used the recommended type of RAM, but the computer does not start with two RAM modules inserted. If I remove one of them, the laptop boots! I thought that I update the BIOS but found the only version available on the download web site is the same as I.

  Does anyone have an idea what could be wrong?

  What RAM you bought? I think that the modules are not compatible or your chipset does not support the 4 GB.
  Check it with CPU - Z!

  You could test the RAM with Memtest86 ([www.memtest86.com]).

  I doubt that a BIOS update will solve the problem. A more recent BIOS does not change the decision-making ability and/or supported RAM.

• Software that has a compatibility with the windows operating system 8, applies to windows 8.1system automatically?

  I just want to know when you buy a software that has a compatibility with the operating system windows 8, applies to windows 8.1system automatically?

  Former title: compatibility

  Yes, he does.  Windows 8.1 is compatible with Windows 8.0.  In fact, it can run almost all programs built for 7, Vista and XP as well.

• My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

  My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?

  I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.

  I disabled the Nvidia because it seems to me that Photoshop is not supported.

  Hey Mohit and other colleagues!

  See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

  I hope that helps for a while this problem.

  Best regards.

• Dreamweaver MX 2004 compatibility with the latest versions?

  Dreamweaver MX 2004 compatibility with the latest versions?

  I have templates in an old Dreamweaver MX 2004 and want to update my software. Will I need to go step-by-step to a version a few years back and then run?  Or can I go completely aware?

  I also can't my old dreamweaver register more and they have NO support for it.  Clues?  It is legitimate one I have the registration number and all the same, but he won't take it for some reason any.

  Thank you for any support you can give.

  droopydrawers wrote:

  ... I also can't my old dreamweaver register more and they have NO support for it.  Clues?  It is legitimate one I have the registration number and all the same, but he won't take it for some reason any.

  MX is the latest version of DW which was created by Macromedia, before the Adobe acquisition. I do not think that it was never actually supported by Adobe, but definitely not now (I think that DWCS6 is the oldest version still supported). The activation of this program servers have long been extinguished, it goes without saying that the registration would be also missing.

  You might be able to use the trick here to activate if you encounter problems with this: error: cannot activate | Product Macromedia

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Satellite A-C55-1N1 - upgrade of the network cards

  I have a Toshiba Satellite C55-A-1N1 running Windows 8.1 and want to update the NETWORK Ethernet card both cards Wi - Fi, with the upgrade of the most important Ethernet card.

  Current card Ethernet installed (by Device Manager) is Qualcomm Atheros AR8172/8176/8178 PCE - E Controller Fast Ethernet (NDIS 6 h 30). I would like to move to GigaBit Ethernet.

  I don't want to disassemble the laptop to determine the size of the current map before obtaining beforehand a replacement (to avoid repeated disassembly). Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if indeed this is possible?

  Map current WiFi installed (by Device Manager) is Qualcomm's Atheros AR956x wireless network adapter. I would like to be able to also connect at 5 GHz...

  As with the Ethernet card, I would get a compatible card before dismantling and would ask the same questions. I also understand that I would need 2 or 3 internal antennas to reach faster speeds of the WiFi. Can someone advise please on existing maps, maps of appropriate replacement and on the issue of the antennas.

  Thanks in advance for any help and advice.

  Due to specific design material update on laptops is very limited and supported. Support is upgrade RAM or HARD disk. It's nothing more than that.
  You can find a list of compatible RAM memory modules to upgrade. HDD or SSD upgrade is not problematic and, on most portable models, it can be done by the owner of the laptop.

  All the other hardware upgrades are not supported. I do not understand that you want to use the material with the best specification but that should help you with this?
  > Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if this is indeed possible?
  These info, you can get the laptop to the manufacturer or an authorized only, partner, but they will tell you the same thing I have already written.

  My advice to you: do not disassemble the laptop on your own. In a first time the valid warranty and secondly, you can damage something.

  At the end one, may be stupid, the question: what is the problem actually? Is your machine so slow or what? I mean in particular the LAN connection. It must be OK.

• Satellite x 200-21 x with the 8600gt sli - performance in Vista & Games

  Hello

  I'm new here.

  So, I installed all the drivers brand new on my Vista Ultimate, but I noticed a few problems.

  1. where can I find or install turbo 1 GB memory... I noticed that in the screen parameters are the values not displayed as they should be written on information cards and Toshiba;
  2. in the exercise and more games I notice slow, bad performance with SLI mode market, with MSI updates of Microsoft especially for sli and nvidia, as well as 2 times 8600 GT with SLI where is performance?

  I had downloaded all the drivers at Toshiba support page... and here are my results: in the image:
  Link: [http://www.moj-album.com/slika/289812/Rarvg0J6H37YPODv.jpg/#]

  I would be very happy to tell me how can I improve my performance so that the games in Sli mode will go to 1024 x 768 with medium/high details in games like (Call of Duty 4, NFS Prostreet)?

  TX;

  Can someone with a Satellite X 200 and SLI in Geforce 8600gt tell me how to improve performance on my laptop and if its normally with the sli mode, with only 256 MB ram, graphic card 1024Mo all together and dedicated 767 MB, as seen on the link to my graphic card screen;

  Because I think that the graphic representation must be better... and now I don't know what to do?

  On my Satellite X 200 - 21 X I run Vista ultimate, all the latest drivers from toshiba are supported, and I can't play games on the resolution of 1024 x 768 with medium details;
  In COD4 is my default definition 800 x 600 all the way...

  So what I expect help and answers.

• Satellite A660 - 1 HL-problems with the graphics card

  Hello!

  This is my first thread so I apologize if I am doing something wrong and for my bad English. :)

  Just bought a Toshiba Satellite A660 - 1 hl with two adapters, integrated and a GeForce GT 330 M. The integrated works well, but when I go to the dedicated I encounter problems. The non-adjustable resolution in optimal mode and windows in the operating system (windows 7) delays when moving. I can't get info on the map in all kinds of temperature programs or dxdiag and such others.

  I tried to install the drivers from nvidia, Toshiba and windows update with no improvement. I can't run Windows expreince index because I get an error message or of any average games do I encounter error messages there as well. I begin to doubt that the drivers installed even.

  I hope you guys can help out me :)

  It comes to getting the error messages:

  http://ImageShack.us/photo/my-images...krmklippe.jpg/

  http://ImageShack.us/photo/my-images...krmklipp2.jpg/

  http://ImageShack.us/photo/my-images...krmklipp3.jpg/

  http://ImageShack.us/photo/my-images/9/skrmklipp4.jpg/

  You should test the RAM (memory) for problems using the Test of memory of Microsoft or the www.memtest.org (bootable CD).

  To confirm that this is a hardware problem, you must save your documents and run recovery.

  If the problem still occur on a new image, then the laptop should go to an ASP (Toshiba Service Center) for repairs (possibly a motherboard replacement).

• Satellite 1700-200: how to upgrade the RAM

  I have an old laptop that Toshiba Satellite 1700-200, with the warranty has expired. Now, I need increase ram (only the wealthy 64 MB, not enough to properly run an installation of Windows XP or a Linux distribution real), and I don't know how to do this. I searched in google several times but I can't find a tutorial for this version. Anyone know how I can do?

  Thanks much ;)

  Hello

  I m not 100% sure, but I think the locations of memory could be placed either at the bottom of the device or hidden under the keyboard!

• Satellite Pro P - can I put the RAM?

  Hello.

  I have model No. PSE45E, I know it is an old laptop, but can someone tell me if I can upgrade the RAM? There 1 or 2 slots available for this or do you need to buy a RAM?

  I hope someone can clarify this point...

  Thank you

  Hello

  I tried a bit with Google and the model No. PSE45E is unclear to me.
  As Akuma said what is the exact model number and Satellite Pro P you have exactly?

  Normally, most laptops are equipped with 2 RAM slots. In addition, I can recommend consulted the user manual. You will find some instructions for upgrading RAM.

  Good bye

• Satellite 1000-Z2: want to upgrade the RAM

  I have the above model, but I can't find any information on this subject on the Toshiba site. I want to upgrade the RAM, but the documentation with the machine that was purchased from PC World in 2001 does not contain details of the speed or the type of RAM to use.

  Can anyone help please?

  Hi George,.

  I think the Satellite 1000 came with two memory slots and was initially equipped with 256 MB of RAM. It is expandable to 512 MB total RAM.

  the following link contains the details of reference numbers and RAM options: -.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5392&ft=m&St=3

  Kind regards

• Satellite P100-160, not compatible with the latest games graphics card

  My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...

  Recently, another solution I've heard of is an external graphics such as the Asus XG station...
  http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
  either this...
  http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/

  However these devices large need an express card slot, which I'm not sure that this laptop has even?

  If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?

  Thank you

  Richard

  Hello

  The Intel graphics card is simply not powerful enough to handle the latest PC games.
  You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?

  The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
  You cannot add also all other ports for laptop. It is not possible :(