Compensate by using HttpDateParser

Similar Questions

• How to convert the string in milliseconds

  Hello

  Please suggest how I can convert a string (October 9, 1989) in milliseconds...

  If it has a certain format, you can use HttpDateParser, otherwise create a calendar object, set the relevant values and get the time to it.

• Convert long DDMMYY

  Hello

  I am getting server date string in todays date DDMMYY format e.g. is 180811. I want to convert long. I used HttpDateParser, but it does support this format. How can we achieve this?

  Thank you

  @simon_hain: thank you. Now it works very well...

  String PROMOTIONDate = "20";
  Nouvelle_date = Nouvelle_date + date.substring (4, 6) + "-" + date.substring (2, 4) + "-" + date.substring (0, 2);

  but I'm not loving the manual scan.

• analysis of date to another language

  Hello!

  I use HttpDateParser.parse (string).

  When the string is in Portuguese language (for example: "Qua, 6 February 2012...") the result is '0 '.

  What should I do to parse the date on the Portuguese language?

  Best regards

  Thks Peter for your help.

  The situation is that I'm parsing of an XML on the Web. So there is nothing I can change from the source system.

  So I adapted my code to replace the strings of Portuguese to English and then it analyzes it wth HttpDateParser.

  That solved my problem.

• If the default value of the field Date

  I have a DateFiled I need to initialize nuer a date I get a string

  String defaultResponse = "09092009";

  long date = Long.parseLong (defaultResponse);

  inputField = new DateField ("", date, new SimpleDateFormat ("DDMMYYYY"), DateField.DATE | ") DrawStyle.HCENTER);

  but I get '01011970', not the value, I'm putting in... can someone tell me what I'm doing wrong...?

  Kaddy

  You have found '09092009' convert to long, so it does not work as expected. The date is represented as a nuymber of milliseconds since 01/01/1970.

  First proposal, to set the date at this point, you should take System.currentTimeMills)

  To create a Date object, use Date dt = Date (System.currentTimeMills ()) new

  You can also create a calendar from the Date object object, and then manipulate the various components of the date (day, weel, year, etc.).

  Or, you can get a date in a format more known (as on 2009-09-09 12:00) and analyze it using HTTPDateParser.

  Please see the API documentation for details.

• When I save my RAW image edited to JPEG of the size of the file is very small? approximately 3 MB per image. How can I increase it?

  I record in JPEG, large file size, but the file saves about 3 MB? Then, when my clients want to put my images on a canvas, etc. image false. But when I use to shoot just JPEG saving used to increase the size of the file and the photos were very good to put on a canvas, etc.

  Please help and thanks in advance.

  Mark

  I'm not a user of the Canon system, so I'm not familiar with their cameras. But I googled your resolution and found a link.

  http://www.learn.USA.Canon.com/resources/articles/2011/eos_qt_small_raw_images_article.htm lp

  Apparently, you pull something Canon mRAW calls, which is a 10.5MP raw file designed for 4 K devices. In other words, you set your camera to produce small size raw files, less than half of a JPEG full size. Then you use Camera Raw to artificially enlarge these files in order to compensate by using a workflow setting widens. I hope that I don't need to explain the futility in this!

  You need to go back to your camera settings, consult the manual and find out how to produce full raw files standard size. This way you do not throw in detail and then the creation of extensions pixelated.

  In short, your camera settings are wrong to produce raw files full size. You are then enlarge the images of 2.4 times and that is why they have air c * p.

  You must change the setting of the camera RAW, and therefore you should not expand in Camera Raw.

• HttpDateParser using the device of time zone

  When the device Simulator is set to Timezome Casablanca GMT, HttpDateParser analyse this ' 2009-07 - 21 T 16:30:30 - 07 "as 21 July 2009 16:30. Which is right. To this I can add the offset of the Atlantic time zone & get the exact time of NY.

  However, when I change the time zone in Brasilia (-3) it shows as on July 21, 2009 13:30.

  This mess up to my calculation for New York time. Is there a way to prevent the HttpDateParser do not use device time zone?

  I figured out a work-around for that... Thank you.

• How to delete a picture library "referenced" without deleting the original photos in the application which is used to compensate for my projects?

  I made the mistake of setting up Apple Photos on my Mac Pro using the library option "referenced" (which is where my computer file are not copied in the Photos). However, throughout the year, I started to do the 'projects' in pictures by which I copied some files of original photos in the Photos app. My library is now made up of a mixture of many referenced files and some originals copied into the app.

  Now I did some heavy reorganization and clean up the photos in my computer folder, but obviously none of these changes can be found in the photos referenced in the Photo app.

  My goal now is to started using iCloud Photos but I want to do with a clean slate (i.e. without using one of the current referenced library that I have pictures).

  I have two questions:

  (1) is there a way to Photos to delete ONLY the pictures that are files referenced and not the originals that are copied into the app?

  (2) if the above is not possible, then what happens to my projects if I simply delete all the photos I have in the app? I'll always be able to see the photos of the calendar, that I did for example?

  I'm afraid that if I delete my entire library I will not be able to access my projects more in the future. Does anyone have any suggestions on how I can manage this?

  Thank you very much.

  A

  You can consolidate all of the photos that are referenced. If you have used photos referenced in the projects (calendars, books), select the photo in your photo library and use the command "file > consolidate."  This will copy the original referenced in your photo library.

  

  To find all the files referenced requiring consolidation of create a smart album:

  File > new Smart Album

  Set the constraint for the album 'Photo is referenced.

  Now you have all the photo referenced in an album. You can select the photos in this album and either use ' file > consolidate "to copy in the library or press the ⌘⌫ key combination to delete the picture from the library.

  Before you consolidate or remove a photo referenced, using ' file > reveal in Finder ' to view the original file.  This way you can remove the copy on your disk after you have removed the photo from your photo library.  If the referenced file is left behind, pictures will not remove.

  If you want to use your photo library with iCloud photo library, it is essential to consolidate the pictures referenced, because referenced photos cannot download on iCloud photo library.

• Use a headphone with iPad 2

  I would like to comment on what headphones to use with my ipad2. Do I need a particular size? And it better with the help of the plug or go with bluetooth?

  Personally, as a musician and a person who appreciates a quality sound, I will return with a headset or headphones that plug in an iPhone or an iPad.

  The sound quality is more real, more accurate.

  Most average price speakers Bluetooth headset/headphones and wireless lose quality in the bass and treble of the higher regions.

  Only the more expensive ($250.00 and upward) Bluetooth headphones/headset wireless and more expensive Bluetooth speaker systems will be the technology that compensates for the loss of bass/treble on a Bluetooth signal.

  Lower prices Bluetooth speakers, headphones / earbuds simply don't have all this bulit technology in them so that they can sell at much lower prices.

  If the budget is concerned, wired headset comes in many points of setting prices, but even some headphones/wired earphone at a lower cost price will be superior in sound quality at cheaper, wireless Bluetooth offers currently on the market.

  My vote is for headphones/wired headset.

  Good luck!

• A toolbar to work is now not checked in Firefox and I can't use it. Can you help me please?

  I used Nectar as my homepage and a toolbar added for many years. I always that it is simple and easy to use (a big plus for aging technophone!) and it is especially useful for letting me know what stores I could shop with through Nectar to increase my Nectar points. Points were also earned to complete the 'research', another useful feature.

  In the past months, I have struggled with this up to the point where I contacted the persistent Nectar. They have kindly added 'free' points to my account to compensate for the fact that I had been unable to use the toolbar or to the shop via the Nectar. They suggested uninstalling and reinstalling the improved version of their toolbar. I tried to do several times, but have failed to be able to access online stores through Nectar and also to add to my total points using the Nectar search tool.

  After trying again, in vain, to reload the toolbar, I now have to find a message from Firefox saying "Nectar Toolbar could not be verified for use in Firefox. Proceed with caution.

  Can you please check this product so that I can continue its use? I don't know how else more to come this problem and would like to make things as simple as they were until this issue has been raised.

  I hope someone can help - but please keep in mind of my state of technophobia and explain things in a way very simple for me (IE without using jargon 'computer' and technical writing!).

  Thank you and hoping that you can help.

  Firefox 40 verification is only a warning message, the new 'signature' feature add-on will keep an extension to work in Firefox 40.

  If this Nectar toolbar simply stop working in Firefox 40, I can only imagine that this is due to a deprecated API that uses the extension or another issued compatibility. Add-on developers who are registered with the official website of modules was warned about this, API removed from Firefox 9 to 12 months to give developers time to fix their add-on before Mozilla removed the corresponding code for this API.

  Bottom line is the Nectar needs to fix their extension to get it working again, AND they need to submit it to Mozilla Add - ons for the signature.

  In 41 Firefox Add - ons that are not "signed" will be disabled, but the user can substitute for it. In Firefox 42 that replace the missing aura of the Beta and Release versions - signature is required for Firefox 42 and subsequently.

• Displays swap when using double view Satellite P100

  I have a Satellite P100 - 434 (PSPADE). I am using the laptop as main display and an LCD as a secondary monitor. I found that no matter how to configure it, using either the Vista view properties or via the Nvidea Control Panel, I get a problem where the monitors periodically switch.

  I'm not bothered what device is the main, but the system to compensate for his mind would be really useful.

  This seems to happen when I type, making me wonder if there is press key I am inadvertently trigger that causes to happen. Ideas anyone?

  Hello

  You should do the following:

  -update your bios to the latest available version
  -update your display drivers and all the other remaining drivers in your system to the latest version available
  -Maybe if the driver update Don t really help out you, recover your machine with the recovery media and check if the error reappears.

  IF all these steps didn t worked for you, then come back and we'll discuss it further. :)

  Welcome them

• Possible to use the main clock FPGA as a basic Source of time for the NI 9234?

  Hello

  I am running a NI 9234, and NI 9222 module on a cRIO-9114 chassis with a real-time 9022 controller, data acquisition on the 8 channels on the full sample rate, using the FPGA.

  My problem is the synchronization of the data, where the NI9234 is usually a late acquisition, compared to the NI9222. I tried manually delay the NI9222 to take the first samples, but so far without success.

  To solve this problem and also to ensure a rate of data more comparable on both cards, I was wondering is it possible to create a Source of time Base master for the NI9234 WITH THE FPGA (opposite to import from another NI9234 or similar module)? The NI9222 I already provide with sampling of the impulses from the FPGA (as expected with this module).

  Another issue would be the characteristics of the exact chronology of the two modules, including in terms of synchronization between the beginning of the acquisition and the first samples of data. I couldn't find any information about it...

  Thank you in advance,

  O Hoppe

  Hello!

  I've never heard of a possibility to use a time base FPGA with a module of Delta-Sigma.

  But I think that the question should be what has not worked to delay the signal and how you did it. Have you read this article?

  How can I compensate for delays of different group with the C Series Modules in LabVIEW FPGA?
  http://digital.NI.com/public.nsf/allkb/74EB238E1BCADD528625735300681A7D

  Can you give a more detailed description of your trial to delay acquisitions? Can you provide a code example?

  Best regards

  Christoph

• Using transformations of curve with several parameters

  I would like to use the ChnLinScale function as a curvetransformation in DIAdem report.

  I created the sub in my file of the user controls:

  Void ScaleAndOffset (dCustScale, dCustOffset)

  Call ChnCopy (CurveTransfInX, CurveTransfOutX)
  Call ChnLinScale (CurveTransfInY, CurveTransfOuty, dCustScale, dCustOffset)
  End Sub

  With this feature, I expect to use the Transformation of the curve "ScaleAndOffset (3,5)" to multiply and compensate for my signal. However when I use I get the following error:

  "Cannot use parentheses when calling a Sub".

  For a single parameter, I can use this construction:

  Void ScaleAndOffset (dCustScale)
  Call ChnCopy (CurveTransfInX, CurveTransfOutX)
  Call ChnLinScale (CurveTransfInY, CurveTransfOuty, dCustScale, 0)
  End Sub

  without problem.

  Is it normal?

  Tone

  Hi tone,

  No, this is not a limitation of the curve of the Transformations, but is rather a matter of syntax VBScript.  Whenever you call a VBScript Sub procedure or function that has more than 1 parameter, you MUST use the prefix 'call '.  For a Sub or Function with 1 single parameter or no parameter, you can omit the 'call '.  I tested with the allocation of processing of the following curve:

  "Call the CurveSmooth (100, 1)."

  .. who calls 2 user setting below control curve of Transformation:

  Void CurveSmooth (SmoothPts, SmoothSym)
  SmoothType = "symmetric"
  IF SmoothSym <> "" SmoothSym AND <> 0 THEN SmoothType = "maxNumber»»"
  Call ChnCopy (CurveTransfInX, CurveTransfOutX) ' copy the input into the output channel channel
  Call ChnSmooth (CurveTransfInY, CurveTransfOuty, SmoothPts, SmoothType) ' smooth the input channel and save the result as output channel
  End Sub

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Select and use the advanced Script data

  Hello

  I developed a script that determines the data but to automate the process more far, I need help with a strategy to select the starting point for packaging data.  I mean, is that I have a piece of raw data that say has 2 events, EV1 and EV2.

  Sometimes, when the data are acquired EV1 is performed first EV2 is performed, sometimes that ev2 is performed first and then EV1 is made, after the acquisition also sometimes only EV1 and EV2.

  I developed a script that processes my data but I have to compensate for a physical value in my script manual then the 'FIND()' function begins to look in the right place.

  I want to do is to have my script request to the user where the script should be considered a starting point for the script or if the part of the script is executed at all.

  Here's how I'm compensating the FIND()

  CtrlTimeVals (i) = Find ("Ch (L2)" > = R1 ', CtrlTimeVals(i-1) + 3537 ")

  RespTimeVals (i) = Find ("Ch (L4)" > = R2 ", RespTimeVals (i - 1) + 35400")

  I use DIAdem 2011

  
  

• Using signal (+/-10 000 g) accelerometer

  Hi all

  I use an accelerometer for measurements of vibrations.

  The accelerometer is connected to an external excitation device to provide the excitement of the accelerometer (coupler-Kistler). The coupler is then connected with the NI SMU-6361 module which is connected to the NI PXI3-1073 chassis. Based on the gain of 1 and the excitement of voltage of +/-10V, the accelerometer can provide + / 10 000 g. I use assistant DAQ for now to see the signal and then moved to DAQmx. I chose the option of tension instead of tension with excitement and I put the settings +/-10V for max and min values of signal, CSR for Terminal configuration. I also used the option of scaling of the table for the g-10 000 to-10 V and 10 000 g for 10 V. The accelerometer does not seem to work properly as long as the signal does not change. Is it possible for the advice me what goes wrong with the configuration of acceleration it please?

  Thank you.

  How to set up the chain of coupler/measure:

  Your sensor has a sensitivty (let's say it's a constant for a given frequency range) S_ug [mV/g] and you add the coupler with a gain of G_c [V/V = 1]. so you get S_total [mV/g] = S_ug * G_c

  The acquisition of your data can read + 5V-(lire les spécifications en détail, généralement qu'ils peuvent lire jusqu'à 5.5V) and the maximum expected acceleration is?

  You can always overtemperature or increase the G_c to measure your signals in an optimum range.

  You read a voltage u (t) and g (t) = u (t) / S_total.    You can do this conversion in your program, or tell MAX / DAQmx for that already in the driver.

  You should read the manual of the hitch on the way to configure the gain or sensitivity.

  If you measure the pulses, lockout for above 10 kHz signals... you can always use the sensor (up to maybe 40-60 kHz), but some more signal processing is involved in this case and make an FFT on the signal. (or a higher uncertaincy)

  If you have the functions of transfer of the probe and the coupler, you can convert your signal in frequency domain, compensate for the functions of transfer and convert bach in time domain, to get a better estinate of your acceleration.