Compile and link time?

Similar Questions

• Compilation of FDI: mismatched CPU target between the compiler and the linker

  Hello

  When I compile my project, it gives an error of link:

  G:\bbndk\host_10_0_9_534\win32\x86\usr\bin\ntoarm-ld: src\main.o: relocation in generic ELF (EM: 3)
  src\main.o: could not read symbols: file in wrong format

  Looking at orders of compilation that I see the files objects created with - V4.6.3, gcc_ntox86_cpp and the linker, try using - V4.6.3, gcc_ntoarmv7le_cpp

  If I click with the right button on the project and select Properties, is specifies the target as the ARM v7 and options to the compiler/assembler/linker including - V4.6.3, gcc_ntoarmv7le_cpp, that is correct.  But if I right click on the 'src' dir and select properties is said - V4.6.3, gcc_ntox86_cpp, which gives the conflict.  Where he does this from?

  I tried "Restore default" and change options around, but it didn't fix the problem.   Is this a bug?   How can I fix the "-V4.6.3, gcc_ntox86_cpp" question?   Is there something that I don't see?  Do I have to manually edit the .project files to fix the problem?

  The version of the IDE is

  Version: 10.1.0
  Build id: v201302012246

  Thank you!

  Solved my problem.   Is go to the cpp files individual and selected "resource Configurations"-> reset by default.   Not sure why she chose x 86 front and the change of target does not spread.

• How to compile and run a Pro * C under Unix program?

  Hello gurus,
  
  I'm new to the Pro * C. I just wrote a sample Pro * C program 'first.pc' to read some information in tables and print it on the screen.
  I do not know how to compile and run to see the release of my first program.
  
  After searching a lot, I tried following...

  -- Step 1 compile the program into .c program
   
  $->ls -lrt first.pc
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  $->proc first.pc
   
  Pro*C/C++: Release 8.1.7.0.0 - Production on Sat Oct 31 05:43:35 2009
   
  (c) Copyright 2000 Oracle Corporation.  All rights reserved.
   
  System default option values taken from: /oracle/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
   
  $->
   
  -- Step 2 Generate the .o file
   
  $->cc -I${ORACLE_HOME}/precomp/public -c first.c
  first.c: In function 'main':
  first.c:154: warning: return type of 'main' is not 'int'
   
  $->
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
  -rw-r--r--    1 sqloper4 staff          3709 Oct 31 05:45 first.o
   
  $->
   
  -- Step 3 After that link the .o to libraries and produce the exe
   
  $->cc -o exe_name -L $ORACLE_HOME/lib -lclntsh
  ld: 0711-317 ERROR: Undefined symbol: .main
  ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
  collect2: ld returned 8 exit status
   
  $->
   
  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  -rw-r--r--    1 sqloper4 staff             0 Oct 31 05:43 first.lis
  -rw-r--r--    1 sqloper4 staff          6648 Oct 31 05:43 first.c
  -rw-r--r--    1 sqloper4 staff          3709 Oct 31 05:45 first.o
  $->

  I also tried steps below after some time thanks to the new program

  $->ls -lrt first*
  -rwxrwxrwx    1 sqloper4 staff          1069 Oct 31 03:39 first.pc
  $->
  $->proc first.pc
  
  Pro*C/C++: Release 8.1.7.0.0 - Production on Tue Nov 3 05:42:14 2009
  
  (c) Copyright 2000 Oracle Corporation.  All rights reserved.
  
  System default option values taken from: /oracle/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
  
  $->cc first.c
  first.c:142:19: error: sqlca.h: A file or directory in the path name does not exist.
  first.c: In function 'main':
  first.c:170: error: 'sqlca' undeclared (first use in this function)
  first.c:170: error: (Each undeclared identifier is reported only once
  first.c:170: error: for each function it appears in.)
  first.c:154: warning: return type of 'main' is not 'int'
  first.c: In function 'sqlerror':
  first.c:260: error: 'sqlca' undeclared (first use in this function)
  $->

  Can someone help me on above errors?
  
  After all, above yet I don't know how to proceed and "run" the program.
  Could you please help me with the steps 'Compile and run' a Pro * C program?
  
  Oracle DB Version: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
  OS: Unix
  
  
  Thanks in advance!
  
  Published by: Learning.Oracle on November 3, 2009 17:13

  Hello

  -lsql10

  Which specifies the library to version 10, but it seems that you have your first assignment 8.1.7.

  You will need to look in your lib directory and see what we call the file in 8.1.7 - it's been too long and I don't remember the exact name.

  Kind regards

  Mark

• pictures page Firefox does not only show the text and links

  New office (not this one) with windows 8.1 Pro, 29 of Firefox, Norton Internet security. When I go to a lot of these images of pages of Firefox are not displayed, only the text and links. This is true for the addons page of 'get '. I can search for Add-ons, but when I try to install one, the installation fails. Will there be a security setting in windows or NIS blocking facilities as well as images of Firefox? Installing Firefox went well without error. Other sites do not have this problem.

  Another user has reported that this was due to a problem of time system. In particular, the date and time is correct, but day was set a day earlier. You can see that?

  Cannot open the view youtube. The plug-in module did open in simplified display only some images. Why?

• I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here.

  I have a server to SP1 Windows 2008R2 with .NET Framework 3.5. I try to update Framework 4.0 and every time I restart the server after installation. 4.0 isn't on 3.5 just here. Why it does this and how do I upgrade to 4.0 to run programs that require the 4.0?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• I tried to add/remove stuff installed on the computer, and every time I try a "memory" box keeps popping up.

  Original title: Out of Memory Box

  I tried to add/remove stuff installed on the computer, and every time I try a "memory" box keeps popping up. What is the cause of this and how do I manage it?

  Hello S.M.R.TJakeman,

  In addition to the response of ramata, the link provided assistance by looking at how many programs you have running.  This could help solve, but if not please let us know what are the specifications of your computer.  Specifically the memory!

  Also, please let us know what anti-virus software you use and when you ran last analysis complete.  Did you run any malware/spyware removal software?

  "System Properties"

  Click on 'start '.

  Right click on "computer".

  Click 'properties '.

  Click on "Général" (XP).

  View the information on your screen. You are now redirected to the specifications of the complete system of your computer.  You can see the processor speed, processor type, system type, the amount of RAM installed and more. When you are finished, click the 'X' box to close the System Properties window.

  Microsoft Answers: The malware removal

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

  Please let us know status.

• My search engine and links are overrided by other search engines and links are redirected to unknown sites.

  Lately I have search in Google my search redirect to Ask.com or Websearch and is not found in the Web site or pick up whenever I ask. Also when using links rather than the link to come they are again redirect to "oops the link is broken or unknown sites. I have two computers and it is only happening on one of them. This happens in Internet Explorer and Mozilla Firefox, so there must be something in windows, I guess.

  Help! Furthermore, research, sites and links are safe places. I practiced before several times. It has all of a sudden start happening. One of the sites that I can not enter is my wordpress dashboard. I get on my account but when I click on my dashboard it say Oops this link was broken. It works perfectly fine on other computers. How can I fix?

  Lately I have search in Google my search redirect to Ask.com or Websearch and is not found in the Web site or pick up whenever I ask. Also when using links rather than the link to come they are again redirect to "oops the link is broken or unknown sites. I have two computers and it is only happening on one of them. This happens in Internet Explorer and Mozilla Firefox, so there must be something in windows, I guess.

  Help! Furthermore, research, sites and links are safe places. I practiced before several times. It has all of a sudden start happening. One of the sites that I can not enter is my wordpress dashboard. I get on my account but when I click on my dashboard it say Oops this link was broken. It works perfectly fine on other computers. How can I fix?

  Hey Isabellasing

  be redirected is often a malware problem

  to make sure that your computer is free from malware scanner

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• Update error... I tried to update for the month and each time it fails

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  This link leads to a response from Bobby Mi, moderator.
  Date: July 6, 2010
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Bobby Mi response will lead to this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/2258121

  Hope this can help solve your problem.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

  I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

  Lumetri Panel/workspace in PrPro is designed as a quick Fixer & able to mainly simple elements you may need to. And it has some limitations so built-in types experienced low editor/colorist can't screw up at all times of their videos. If this tool has everything you need, so it is very convenient. You do not need to learn a lot of ranking 'thought process', just look at your scopes & your program monitor.

  If, however, you'll need to tell secondaries 'Key' on some shades at certain levels of brightness/saturation to change just THE color, hue, brightness, saturation data, or a number of other things more important to the image, then SpeedGrade would be necessary. For me, I use the Lumetri Panel on the simple things, but... as Jim pointed out, if I want to hit secondary or make major changes, I'm more the Sg. Because after I learned that the app rather... unique... minimalist... UI, I'm actually able to move quicker on things over there than in the Lumetri Panel.

  SpeedGrade is not the same as applications other colorist/ranking, didn't say the vast-toolset of determination... but link Direct saves a TON to prepare sequences & projects on XML/EDL out and return & tel. If you go to work with her, I suggest strongly to e-book by Alexis Van Hurkman "Adobe SpeedGrade."... Getting started» It is still CS6... BUT... It covers quickly and directly how SpeedGrade works and how to do things you want to do, better than anything else I've seen. The big change is in the CC versions using the Direct link that you don't have any EDL input/output, and as all the scenario changes you make through PrPro, both the chronology controllling/replacement parts of Sg is grayed out in a project of direct link (directly using a project file PrPro). The interface... different color... is almost identical to the versions CS6.

  In addition, there are some good programs on service tutorial lynda-dot-com, and some that are quite useful on SpeedGrade in AdobeTV that will give you the look more recent Sg and Di-link process. Maybe you spend a few hours in watching & playing around, but once you get this thing is pretty easy to use.

  I do not recommend having a ramp... a block of neutral gray tones will generally from left to right black (0) to white (100) that you can put on a timeline, see to the Sg, and then look at what is happening where when you change what... so that you get a feel for say overall "initial" three color wheels/luma sliders , which left elevator control, controls gain way Gamma and right hand do... and you need to see that the elevator is * not * the shadows... and then, when you change moves on the shadows, mediums and highlights and always looking three combos of luma/color controls, now what region they change? What control on how these controls affect the image data pivot controls provide?

  It sounds more complicated than it needs to use, really... you just can't guess what they are doing and being puzzled at the first/frustrated when things do not respond as you expect. A few graphics and several simple explanations & examples... and you'll be off and running.

  Neil

• Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens

  Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens

  Hi Glenn,.

  Please try the steps mentioned in the link below and see if you are able to serialize your software.

  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC
  • Try Solution 2: clean the connection of the cached user information.

  Please share the results after you perform the steps.

  Thank you

  Atul Saini

• Why Acrobat does change the parameters in the bookmarks and links on its own?

  Hello everyone ,

  In the last weeks I met a problem that seems to be a bug.

  I used the functions of many times before without encountering this problem.

  The problem is: Acrobat seems to change my settings of bookmarks and links on its own.

  
  

  
  

  That's what I do:
  

  A Word document is converted to pdf using Acrobat / save as pdf.

  Then I open the document in Adobe Acrobat format and make some additional adjustments on how are treated bookmarks, and how pages are displayed.

  For this, I use the menu: file / properties... where I in initial view choose to display bookmarks menu and an entire page.

  Links: for each link, I have activelly chose page to link to and I have this than a whole page to be shown.
  

  But something strange seems to happen to my favorite (and links). Even if I manually change each single bookmark properties (by right-clicking on the bookmark and then change properties), the Acrobat seems to change my settings in "Execute JavaScript", after which pages in my document do not appear as whole pages; Instead, the view is expanded. Often Adobe (and the reader, I tested both) show the zoomed pages so that they fit the frame of the window open.

  What is the problem here? What I am doing wrong?

  This would be a strange bug? Or is there a setting that I happened to change without knowing?

  I have a similar problem with links. Even though I actively chose a particular magnification of the linked page, the program changes the settings on its own. Rather than show a whole page, Acrobat (and subsequently Reader) are suitable for the page on the frame.

  What is the problem here? What can I do to ensure that my personal settings are retained?

  Sorry for my English. I use the Swedish version of the program, so I am only guessing what are the different options are called in English.

  
  

  Greetings from Scandinavia,

  LM

  
  

  I can change the properties of the bookmark without any problem:

  

  

  

  

• "Place and link" and buttons?

  Hello

  In my effort to simplify my DPS workflow, Ive worked with much linked content and Ive noticed something curious.

  I create an indd file with content that has buttons in it. I connect then to ensure that the content of a folio specifically in a setting indd file floating. My reason for being, when the inevitable changes in the content here, I have no unpacking the frame floating, but rather can make the changes to the linked file and update the content linked in the folio file.

  All content is displayed correctly, but the buttons do not work. I could understand it if they were targeting a State of the object, but they are not connected to a MSO, they just navto: / / to other articles (that is, navto://Contents.)

  IM I doing something wrong or is it just how it is. No work around?

  Thank you

  DW

  I can get the "Place and link" workflow * at work, including the navto: / / buttons, but I really don't like this method. I'd rather select and cut the content frame, pasting it into the editing table, editing and then cut and paste in the container, which stores its settings. You'll want to check your button actions to ensure that they are kept.

  Another approach - which is especially useful for shares of MSO buttons that are lost when pasted - is to add the frame content in a group with two dummy buttons. When you want to change the frame of content, use the layers panel to frame dragging content out of the group, make your changes, then drag it into the group. (You need two dummy in the group pictures because a group needs at least two objects to remain a group).

  

  It is a good topic for a blog post. I'll write and post a link when I get the chance.

  * I have increased the size of the vertical timeline, the content time given in the editing table, set it to auto size, chose to change > Place Link, glued, cut and pasted and then as part of the container. When I change the source image in the editing table, update the target framework works, but I must reject one or two substitute messages. Maybe someone else has found a better method.