"Place and link" and buttons?

Similar Questions

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.

• How to check the links and buttons of enamel are traceable? If I send the email through Eloqua?

  I sent you an email through Eloqua. I don't know how to check the links and buttons are traceable?

  Hi Lucie,.

  There are 3 ways to check your links and buttons are traceable or not:

  1. When you mouse pass the link or button it will not display the actual URL. It will show you a few encrypted URL which will redirect you to the actual URL.

  2. connect to the eloqua account and search your email. When your email open ups click setting ICON and then click on manage links. All the links and URL of the button should be checked.

  3. If you want to check at the level of the code make sure after all the links and buttons URL "elqtrack = true" must be written.

  Hope this will help...

  Thank you

• Help with a script to remove the link "Place and link" content

  Hello

  I need a script that will separate the content that has been placed in an indesign document by using the feature "place and link.

  I know I can manually go to the link Panel, select the linked content here and click 'remove link' in the Panel menu. However, I have about 200 indesign documents that are all full of content that has been 'placed and connected '. One I get a script to unlink content, I can add it to a batch routine to make the record of 200.

  Can anyone help please.

  See you soon

  Like this?

  app.activeDocument.links.everyItem () .unlink ();

• What is the difference between 'place' and 'add files to download' in Muse CC?

  Hey guys... What is the difference between 'place' and 'add files to download' in Muse CC?

  Thanx

  You place the images to display on your site.

  You add files to download and make them available for download by visitors to your site.

  For example, you can add a PDF document, a Word document or whatever you want. These files are not displayable on your site, but you can link with the Hyperlink command to a button to make them available for download by visitors to your site.

• Computer hangs after having gained access to workstation, network from the beginning places and at other times.

  Hi, I use Windows XP Professional SP/3 on a 32-bit computer. We have three computers on a home network wireless, everything works well for several years. Now several weird things happened more or less at the same time. I can't identify anything what I did precisely that lead to these problems that are:

  a. when I try to open 'My computer', ' Start ' or after opening 'Explorer', all I see is a small icon yellow flashlight, but not records.

  b. when I go 'Start' to 'My Documents' or 'My images', 'My Network Places' and the respective window opens but then crashes if I try to select an option in the left column.

  c. when I open a Word, PowerPoint or other document and try to "save under", a small window pops up that says "initialization root to display folders» Finally after about 2 minutes, show records roots but once again the process crashes as I try to use it.

  d. my computer recognize my HP ScanJet 5590 or my Canon digital camera when I attach one of them through a USB port, but the scanner Wizard and camera does not open to receive the downloaded or scanned images... nothing happens.

  e. when I open a file in "My pictures", I get a picture icon, not the image and then have to go to 'open with' to see the photo in the image viewer. If I try the film option, I see "generating Preview ' but nothing happens.

  f. and finally, when I get to the "my network places" and then click on "computers from the network view", the window hangs. Other computers on the network will appear in "My Network Places" but now only show as an icon is empty, is not an active link.

  So, maybe all these oddities relate? I have reloaded the scanner software, checked the camera drivers and a scanner, all OK. I don't know where to go from here after reading several threads of discussion about some of these issues. Can someone help me? Thank you very much.

  John

  To answer #1, that looks like a setting in the "boot.ini".  The following articles answer this:

  "How to edit the Boot.ini file in Windows XP"
    <>http://support.Microsoft.com/kb/289022 >
  "Switches to boot mode safe mode to the Windows Boot.ini file"
    <>http://support.Microsoft.com/kb/Q239780/ >

  This could have also been established by setting a check mark in the tab "Boot.ini" in msconfig.  Try to clear all the check marks in this tab.

  Good job tracing it down to WIA.  He would explain or influence the camera, scanner and long delays to explore.  Check out some of the following items:

  "Long delay before appear it files in my computer in Windows XP"
    <>http://support.Microsoft.com/kb/819017 >
  "Windows XP does not recognize a Canon PowerShot S100 Digital camera"
    <>http://support.Microsoft.com/kb/810609 >
  "Windows XP takes a long time to start"
    <>http://support.Microsoft.com/kb/823612 >

  I believe that the general consensus is to remove all the seller WIA drivers, reboot, then reinstall them using the manufacturer.  It could be that you ended up with an incompatible mix of drivers, perhaps due to an update.

  HTH,
  JW

• What do you do when windows and buttons is gray out?

  Hi, my name is Rhionna and I have a problem on my Windows XP Service pack 3. Well, last night, I scanned my PC for registry errors there were some and I fixed them, but now I can not apply visual styles. Windows and buttons in properties is grey outside, it wasn't before but today I went to a link to a website to try to repair the files in my theme after that, it was gray would be out so what do I do? :(

  Registry cleaners are dangerous programs.  I do not recommend their use for these sorts of reasons.  Your best bet at the moment is to restore your registry to a time before you had this problem using "System Restore".  One of these two methods, you should get going again.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  If you cannot start the program of the above procedure, or if it fails to restore, then try this:
  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  HTH,
  JW

• Vertical horizontal ratio has been changed accidentally. Now a vertical oblong (eg. a playing card) looks like the place and all the letters and pictures seem to be shortened.

  I suspect that I accidentally pressed a button or two on my Toshiba Satellite M55 and now all the images and the text have changed their vertical horizontal ratio. As a result, a vertical oblong (like a playing card), now looks like the place and all the letters and the images seems to be shortened or at least more wide than they should be. Is it possible to restore the original report? I tried access to control panel, hot key lists etc but can't find anything that actually return my screen to a normal appearance. Can anyone help please?

  Check Toshibha manul to press the function key to undo the changes.

  Good luck!!

• I have the windows easy tranfer put in place and it's not easy is not tranfering what is the phone number for pension

  I have the windows easy tranfer put in place and it's not easy is not tranfering what is the phone number for support
  I have the windows easy tranfer put in place and it's not easy is not tranfering what is the phone number for support

  Hi debcorr,

  Do you have a code error message when you try to use Windows Easy Transfer?

  You can follow these links that should help.

  Upgrade Windows XP to Windows 7

  Description of Windows Easy Transfer for Windows Vista

  You can follow this link to contact Microsoft Customer Service.

  How and when to contact Microsoft and support Customer Service

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to configure the computer to place and receive phone calls?

  I get a modem to the PC and would like to know about Computer Configuration to place and receive phone calls.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Hello

  You can make and receive calls using Windows 7, since it is compatible with the hardware and software used by most Internet calls services calling.

  You can use Skype or any other third-party application to make and receive calls on the network. You can also consult the help link and check if it helps.

  Make a phone call over the Internet (VoIP)

  http://Windows.Microsoft.com/en-CA/Windows-Vista/make-a-phone-call-over-the-Internet-VoIP

  (This article also applies to Windows 7)

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Basic tutorial shows a logo in the image of the lighthouse can be easily, folder + place. I don't have 'Place' in my drop-down list. I have 'Embeded Place' and 'bound place '. What I am doing wrong?

  Basic tutorial shows a logo in the image of the lighthouse can be easily, folder + place. I don't have 'Place' in my drop-down list. I have 'Embeded Place' and 'bound place '. What I am doing wrong?

  You do not have something wrong. January 2014 Photoshop CC update has added the ability to incorporate link GOLD Smart Objects. Before this update Photoshop CC, smart objects are always embedded in the Photoshop document. Although he made the biggest file size, it was as a backup plan because all placed files have been included in the document. Now you have the ability to embed or link the smart object. Link refers to the file instead of actually copying in your current file. Regarding your little tutorial, choose Embed.

• Menus and buttons to recall?

  I know that in the past, the menus and buttons were material extra that only can be found on a separate disc, where do download us such things now? It is the part of the creative cloud, right?

  Hi "malacca73".

  You can download the content by clicking on this link:

  http://helpx.Adobe.com/x-productkb/multi/library-functional-content-missing.html

• I can't seem to locate the text and buttons on a flash model, I bought

  Hello world

  I worked with this flash model I bought online and can't seem to be able to change the text that appears on the buttons it is except the first. There are four buttons on the side, but I can change only contained the first button as I see them in the "library". I'm new to Flash and learning. Please guide me as to where I can find the other components.

  I can only see and change "WorldWide" and "Call anytime ready" button.

  Source Flash file posted here:

  https://docs.Google.com/leaf?ID=0B8tFparkP0rKMzliNTcxZDktYmQ3My00ZjJiLWFhMDQtNTEzNWExMWZlN Dgx & hl = en & authkey = CKrQwcwF

  I also want to add a link to each button and I can't seem to find the link URL button. I use Adobe Flash CS5.

  Very much appreciated.

  DoubleClick just the movie in the library to open it for editing

• In the forum Coursera pages there are different icons and buttons, but I see that only holders of palce, small squares with letters in there. Any help?

  In the pages of the coursera.org forum, there are different icons and buttons. They do not display correctly. I can see only tiny forms square with characters in them. Hovering on them can display information in some cases, but it is not very convenient. Although they recommend Firefox, I use Chrome instead. Chrome has no questions here so far. Is it possible to view these icons correctly?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a