How to operate the computer faster

Similar Questions

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  I want to know how to restore the computer to its factory settings, when I bought from a private party and have an administrators access code

  Hello

  What is the brand and model of the computer?

  The best method is to contact the computer manufacturer for help on how to set the computer to its factory settings.

  Hope this information helps.

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• How to operate the F1 on the keyboard wireless 1027

  How to operate the F1 on the keyboard wireless 1027

  If key Fn is disabled in the BIOS, then you need to press Fn + F1 key, use the special function and just press the F1 key to use F1 and vice versa.

• How to reset the computer to start the boot minimum troubleshooting.

  I posted this screenshot because I have no idea what can be the maximum size of a question and I thought I have copy paste this but I to Sir's life saw the question so I did this. Additional information that could help. This is my task manager open resource monitor and windows firewall not wanting to tk starts. And I have windows updates where I chose to update (I try to deny each update.) And so far I've checked that I have 482,5 MB of updates of windows that say I should put to date. (apperently 130 important and 10 optional) in addition apperently my computer don't think that I am administrator I do not understand when I'm the only profile on the computer.

  Hello

  In response to the information provided by you, please try to follow the methods and check them off below if this can help,

  Step 1: Scan of Sfc.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Follow the steps below to perform a scan of the SFC.

  1. press the Windows key + X key.

  2. Select prompt (admin).

  3 type the following command:

  Sfc/scannow

  Step 2: Clean boot.

  Make your systemclean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  https://support.Microsoft.com/en-us/KB/929135

   

  WARNING: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Please let us know if the problem is resolved or you need additional assistance.

  Thank you.

• BSOD and how to refresh the computer

  I have a gateway to window computer 8 I've had for a year now and never restarts time I try to put on my computer it won't let me because it goes to the home page and comes up with a message with different types of BSOD errors and then force, then whenever the computer load it keeps then me on reviews and it never let's me back to my original account and I need a way of doing things to normal or if someone can tell me how to reset the computer that would also be very useful.

  Original title: my computer problems

  Hey Nasir,

  I understand that your computer gives error BSOD and your user account is signing you as a guest user and you also want to know about reset.

  Sorry to hear about the embarrassment caused and thank you for the detailed description.

  To help you better please answer the following questions:

  1. What is the brand of computer?
  2. You have a third-party security program installed on the computer?
  3. You recently made any changes to the computer?

  This issue could be due to the following issues:

  • Drivers are corrupt.
  • Damaged user account.
  • Problems of virus and malware.

  Learn more about BSOD please refer to the article:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

  Follow the suggestions below and check if this can help:

  Method 1: Safe Mode

  Follow the bottom of the article which will help you to start the computer in safe mode and check if it works fine in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Search your computer in safe mode, all the third-party program installed on the computer are disabled in this mode.

  Method 2: steps can be followed to BSOD

  This article will help you solve the BSOD errors on the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  How to reset the computer

  Please follow the article below and this will give you the procedure step by step to start the reset of the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Refer to: refresh your PC without affecting your files.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to get the computer to boot from a USB?

  I use offline windows Defender. Start the computer to the USB you need. How can I get the computer set up to do this?

  my computer is a HP Pavilion e9100z.

  Thanks for any help

  Hello

  We will determine if your PC can not even boot from USB devices.  Plug the USB and turn on your PC.  When you get to the HP splash screen, then start typing the escape key to bring up a boot selection menu. If you do not see the USB device then your PC can't boot from a USB device.

  If your PC does support booting from a USB device and then read this MS post article.

  You always have the option to start Windows Defender from a CD or a DVD.

• How to make the computer to recognize that there are 2 monitors?

  I have a new hp pavilion hpe h8-1124 with AMD Radeon HD 6570 GPU.  It does not have a VGA port, so I used the adapter supplied in the box HP (DVI / VGA).  To get to two monitors, I used a VGA 2 VGA splitter 'Y '.  Both monitors turn on and show the desktop, but when I use the Windows screen resolution (7 professionals), to stretch my office, the choice of two screens are not present.  Using the button detection detects only a single monitor which is names @.  Using 'Identify' places '1' in each monitor.  When that I start with a single monitor, "detect" correctly identifies appointed monitors.

  How can I get the computer to recognize the fact that there are two different monitors?  If I can't do this, I can't do the rest of what I need to stretch the desktop on two monitors.

  Hello

  Get rid of the VGA splitter.  You have noticed it doesn't work for the Office of 'cloning', but do not stretch across two monitors.

  What are the other ports on the video card?  without doubt, DVI, HDMI, and VGA if this is correct, then one of then one of the monitors must use DVI - D or HDMI if you want to continue to use the VGA for the other monitor.

• How to analysis the computer to my HP 8500 A909g to my MacBook Pro

  I have a MacBook Pro running 10.8.4. I can't have the scanning to the function of the computer to work. I downloaded the latest drivers from Apple for Mountain Lion. I uninstalled and reinstalled the printers so that rerun the configuration utilities. How to solve this problem?

  Hello

  Don't forget to scan by using one of the methods below, scan from the front panel is not supported on Mountain Lion:

  http://support.HP.com/us-en/document/c03550518

  Please let me know if this work, otherwise don't forget to run the software update from the Apple menu and try to scan the image.

  If there is a mistake, don't forget to specify the exact error or behavior message, as well as the type of connection continued.

  Shlomi

• How to return the computer to factory conditions

  I'm really having a very hard time with this.  I tried to restore my computer to factory to get rid of windows 8 etc.  I've erased everything, or so I thought.  Windows 8 is still on it.  I have discs I need etc to back to factory.  But I can't figure out how to get the discs to run.  I went to my control panel for the recovery and said everything I looked for me to choose methods of recovery in advance.  Although in my control panel that the option is not there.  So I'm still stuck on what to do.  I want to go back to the factory and start but nothing I try does not work.  I worked on it for 2 weeks and I am ready to throw this whole computer.

  Hello

  This should help you.

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  See you soon.

• How to restart the computer in safe mode?

  Is there a way to restart the computer in safe mode UN-staged network, or at least to list computer startup options including safe mode, without having to wait for the computer to stop, then press on and hold F8 during initial computer boot?

  In particular, there is a command that I can enter from the cmd prompt?

  If it's important, I have a Dell Latitude D610 with MS WinXP Pro 2002 SP3.

  But I really want a method that works on any MS WinXP.

  You can configure your system to boot in any mode desired by using the msconfig utility.

  Click Start, run and enter in the box:

  Msconfig

  Click OK to launch the utility.

  On the BOOT. INI tab you can add/remove options to the boot.ini file so next time XP starts, it will start in the selected mode.  XP looks at the boot.ini file to decide how it is supposed to start.  You can use the built in Help and/or a few searches on Google to learn more about msconfig.  You will need to adjust things again if you want to start in a different mode, but there would be no F8 key.

  A word of warning.  Some malicious software now recognizes when you added the/SafeBoot option in the boot.ini file on your system.  The malware knows some of the things you could do to try to find and delete this... and he won't be deleted.  He wants you to think that you need to reinstall your XP instead.

  If your system has this condition and you add the option/SafeBoot, your system unbootable ever again successfully XP from hard disk in a different mode until you remove the option/SafeBoot your boot.ini file by starting on something else (like a CD) to manually remove the switch/SafeBoot.

  The switch / SafeBoot used to be pretty, a good idea, but it isn't a good idea these days.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How to access the computer management?

  Original title: computer management concole restricted by policy
   

  How to enable access to the concole menagement computer which is limited by the policy snap-in?

  Hi Nikola Dragutinovic,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you do not want to activate the computer management console, which is limited by the policy snap-in. I'll be happy to help you with this problem.

  The setting of group policy to restrict users to the explicitly permitted snap-ins list lets you selectively enable or disable the Microsoft Management Console (MMC) snap-in. However, before enabling this setting, you must activate the settings in the folder "restricted/permitted snap-ins" software snap-ins MMC that you want to use.

  I suggest you to follow the steps from the link and check if it helps.

  You must enable explicitly pluggable MMC that you want to use before you enable the group policy setting "Restrict users to the list of snap-ins explicitly allowed" in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/931865

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• How to finish my defrag and how to lock the computer

  I have a windows xp with vista netbook.  How to make chkdsk /f to run.  How to defragment to finish.  What are the mpf files.  It says I have fragemendted

  How safe boot that.  Also, I don't have my net number of the computer.  How to download c ++ for free when I could do it before.  Also, what is

  a good setting for security.  Harry

  Unfortunately, both a chkdsk (check disk) and Defrag are high level utility that correct problems with the file system.

  most importantly, windows you cannot defragment if 1) there is no free space on the disk and 2) if the file system is dirty.

  so if you're stuck with an incomplete defragmentation, it's a serious problem.

  If, however, you have not been able to run a defragmentation because you run a check disk (chkdsk), then you're ok for now.

  to run a disk check, open windows Explorer / my computer.

  then right-click on the drive letter, select Properties, then go to the Tools tab and then to initialize the control disc function.

  by the way, don't know why you want to c ++.   Remember that you have a netbook with limited resources and not a full blown computer.  I would Setup not all that kind of public services on the small machine of high-level programming.

  Finally, you can get information on your netbook by looking at the sticker or label on it or by running a utility that gives you information on your machine.

  It is important for you to know the number of brand and model of your machine because there is a lot of information, how to, faq, patches and updates to their homesite.