Compile command line in RH6 errors

Similar Questions

• Microsoft visual C++ 2005 SP1 Redistributable Package (x 86) Command line option syntax error.

  Original title:

  Microsoft visual C++ 2005 SP1 Redistributable Package (x 86)

  When installing AutoCAD 2012 to my freshly installed Windows 7, I get the error:

  Microsoft visual C++ 2005 SP1 Redistributable Package (x 86)

  Command line option syntax error.

  I'm working on Lenovo laptop, with x 32-System.

  Please, try to solve this problem with me.

  Hello

  Sorry for the delay in response.

  If you are still having this problem then you can take a look at the following link and check if that helps.

  https://support.Microsoft.com/kb/952211?WA=wsignin1.0

  If you need help you can also post your question here:

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home

  Thank you.

• Unable to ping a website in command line with an error message: 'ping is not recognized as an internal or external command.'

  Original title: ping does not work

  In the cmd box when I try to ping from a site, I get a message saying 'ping is not recognized as an internal or external command.'

  I entered the command as follows: Office > ping www.yahoo.com

  Dan Calic, salvation

   

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to ping a website in command line with an error message: 'ping is not recognized as an internal or external command.' Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 are you facing problems when accessing Internet?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the steps and check the question below:

  a. click Start, and then type the three letters cmd in the search box and then right-click on command prompt and click run as administrator.

  b. type these commands and press enter after each:

  dir %SystemRoot%\System32\ping.exe

  path %path%;%SystemRoot%\System32

  Ping www.yahoo.com

  c. a report.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I get an error message saying: "command line option syntax error. Type the command /? assistance. "

  I'm running Windows 8 preloaded on Sony Vaio and when I try to install the latest update for Atheros Bluetooth Driver Quelcomm, I get an error message saying: "command line option syntax error. Type the command /? assistance. "

  Help, please!

  I followed your instructions, I did not read the comments below first, I change the TEMP and TMP to C:\Temp, it's ok to forget it or do I needed to switch back? But I forgot to copy the original. If I need to change it back, can give me the original code to stick it on the TEMP and TMP, I use Sony Vaio sve14128cb WIN 8.1. Thank you for helping me.

  Dear all,

  I got other way to solve this problem, and it was mentioned by Mr. Vijin.

  If I'm not mistaken, the error message will be show after you go to update your driver Qualcomm Atheros Bluetooth Vaio update version.

  My way is very simple and maybe you can give it a try. Just go to the Google Web site and key in the version that you want to update. Please select the site Web is Sony's main page.

  Or you can visit the official site of Sony for your country, go to 'Support' and key in the version on the area of research and research.

  You can try link below also but I bother it's a newer version for your computer.

  http://www.Sony.com.SG/support/download/554324

• command-line option syntax error type command /? help

  Whenever I have try and download updates, the following message is displayed with a ' syntax error type command-line option command /? help "but when I type the?" / key nothing happens?

  I had the same problem, even in the guidelines recommended by microsoft, faild, but I solved it

  go to google and put

  Download (pilot saw issue and the version of the driver) and download it manually on sony.com and install good luck

• The developer command-line tool Setup error

  Hello

  I had a hard time trying to install the tool developer for the AEMM, since that it was released yesterday.

  Here is what I get after the execution of the installation in root mode command line:

  Anyone who managed to install the tool?

  NGP ERR! Darwin 15.3.0

  NGP ERR! argv ' / usr/local/bin/node "" / usr/local/bin/NGP "'install'"-g"'aemm.

  NGP ERR! node v5.8.0

  NGP ERR! NGP v3.8.3

  NGP ERR! path /usr/local/lib/node_modules/aemm/bin/aemm.js

  NGP ERR! code ENOENT

  NGP ERR! errno - 2

  NGP ERR! syscall chmod

  NGP ERR! ENOENT ENOENT: no file or directory, chmod ' / usr/local/lib/node_modules/aemm/bin/aemm.js'

  NGP ERR! ENOENT ENOENT: no file or directory, chmod ' / usr/local/lib/node_modules/aemm/bin/aemm.js'

  NGP ERR! ENOENT This probably isn't a problem with the NPM itself

  NGP ERR! ENOENT and is linked to the NPM is not able to find a file.

  The command line tool is still under review and will be available soon. We'll let you know when it is available.

• Element of command line compile error

  I have a folder 'CTL' in there I have a file called "Email.as" and looks like:
  
  the CTL package
  {
  Import mx.controls.TextInput;
  import flash.events.Event;
  Import mx.validators.EmailValidator;
  
  Email/public class extends {TextInput
  public void Email() {}
  ....
  ....
  
  When I try to make it a component with the compc compiler command line
  I get the following error:
  
  C:\_tmp_\test_swc\ctls\Email.as: Error: a file in a source path must have
  the same package structure ", as the definition,"CTL"package
  
  The comand line I run is:
  CompC-source-path += CTL-debug = false - Email o = bin/mylib.swc
  
  How can I solve this?
  
  Thanks in advance
  
  
  

  So here's my setup:

  Home directory = c:\flex\bugs\foobar
  Here, I have a directory called 'CTL' which contains a simple class
  called Emails.as (c:\flex\bugs\foobar\ctls\Email.as), which is located in the CTL
  package.

  $ cd c:/flex/bugs/foobar
  $ c:/flex/143452/gmc/bin/compc-source-path +=. -debug = false - o = foo.swc
  CTL. E-mail
  C:\flex\143452\gmc\frameworks\flex-config.xml loading configuration file
  C:\flex\bugs\foobar\foo.swc (1023 bytes)

  "ddanone" wrote in message
  News:e9j64b$T57$1@forums. Macromedia.com...
  > If I use C:\_tmp_\test_swc\compc.exe-source-path +=.-debug = false
  > - o = bin/mylib.swc
  > CTL. E-mail
  > then I get the same error: error: source not found for the class
  > CTL. Messaging.
  >
  > I don't get crazy! On textbooks, it's easy, but Adobe does not source
  > samples to test the compc compiler.
  >

• BB10 signature command line question says:

  command line says:

  Error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again.

  Manifesto says:

  Archive-manifest-Version: 1.5

  Archive-created-by: BlackBerry Elf Packager 1.7 BAR

  Package-Type: application

  The author of the package: the blue Gystrophacy

  Package-author-Id: testVGhlIEJsdWUgR3lzdHJvcGg

  Package name: ras

  Package-Id: testRel_ras___1b824___

  Package version: 1.0.2.1

  Package-Version-Id: testMS4wLjIuMSAgICAgICAgICA

  Package-Architecture: armle-v7

  Application name: SiteManager

  ID of the application: testRel_ras___1b824___

  Application Description: Toolbox for manufacturers

  Application version: 1.0.2.1

  Application ID-Version: testMS4wLjIuMSAgICAgICAgICA

  Request-requires-system: Tablet OS/10.0.4.0

  Mode-application development: false

  Name of the entry Point: SiteManager

  Entry-Point-key: e1

  Entry point: WEBKIT_NUMBER_OF_BACKINGSTORE_TILES = 12 app/native/wwe

  Entry-Point-Type: Qnx/Elf

  Entry-Point-Icon: {86x86}native/resources/icon-86.png:{150x150}native/resources/icon-150.png

  Entry-Point-Splash-Screen: {1280x768}native/resources/splash-1280x768.png:{768x1280}native/resources/splash-768x1280.png

  Entry-Point-focus: auto

  Entry-Point-user-Actions: access_internet

  Entry-Point-System-stocks: run_native

  I changed the number of version two times now and always doing this to me. any ideas?

  User error:

  in ripple settings name of archive I've capitalized the s in sitemanager

• PL/SQL in Sql Developer 4 script, works not sqlplus command line.

  Hello guys, Xev here.

  I hope I meet new people there into that in this space. I hope this is the appropriate space to ask this, I see that others have asked about sqlplus and they where permitted to post...

  I have a pl/sql script that runs in sql developer 4, but the exact same script will not run in the sqlplus command line?

  When I run the script, it gives me this, but as you can see with this script that works fine with sql developer, he is not running sqlplus command line.

  ERROR at line 3:

  ORA-06550: line 3, column 28:

  PLS-00201: identifier 'DYNAMIC_COUNTS' must be declared.

  ORA-06550: line 3, column 4:

  PL/SQL: Ignored Element

  ORA-06550: line 39, column 17:

  PLS-00487: Invalid reference to variable 'DYNAMIC_COUNTS % ROWTYPE.

  ORA-06550: line 39, column 1:

  PL/SQL: Statement ignored

  ORA-06550: line 41, column 17:

  PLS-00487: Invalid reference to variable 'DYNAMIC_COUNTS % ROWTYPE.

  ORA-06550: line 41, column 1:

  PL/SQL: Statement ignored

  ORA-06550: line 43, column 17:

  PLS-00487: Invalid reference to variable 'DYNAMIC_COUNTS % ROWTYPE.

  ORA-06550: line 43, column 1:

  PL/SQL: Statement ignored

  ORA-06550: line 45, column 17:

  PLS-00487: Invalid reference to variable 'DYNAMIC_COUNTS % ROWTYPE.

  ORA-06550: line 45, column 1:

  PL/SQL: Statement ignored

  ORA-06550: line 82, column 15:

  PL/SQL: ORA-00942: table or view does not exist

  ORA-06550: line 82, column 3:

  PL/SQL: SQL statement ignored

  Here is the script I use... You define a type of thing in the sqlplus command line?

  Set serveroutput size unlimited

  run the DBMS_OUTPUT. ACTIVATE (buffer_size = > NULL);

  DECLARE

  TYPE nt_tab IS TABLE OF dynamic_counts % ROWTYPE;

  v_nttab nt_tab: = nt_tab();

  FND_LOOK INTEGER.

  v_incr NUMBER: = 0;

  ------------------------------------------------------------------------------------------------------------------------

  BEGIN

  FOR t IN (SELECT master, table_name, column_name

  From all_tab_columns

  Owner WHERE = UPPER ('& SCHEMA_NAME'))

  ------------------------------------------------------------------------------------------------------------------------

  LOOP

  BEGIN

  EXECUTE IMMEDIATE ' with an ACE (select case when REGEXP_LIKE (' | t.column_name |))

  -This search 1 letter and 12 figures-

  ', "^ ([[: alpha:]] |) [[: alpha:]] ({3}) [0-9] {12} $")

  then "match"

  another "no matches found" end up as output of ' | t.Owner | '.' || t.table_name | ')

  Select count (*) in a where a.output = "Match Found" clause '

  IN FND_LOOK;

  ------------------------------------------------------------------------------------------------------------------------

  IF FND_LOOK > 0 THEN

  v_incr: = v_incr + 1;

  v_nttab. EXTEND;

  v_nttab (v_incr) .t_owner: = t.owner;

  v_nttab (v_incr) .t_table_name: = t.table_name;

  v_nttab (v_incr) .t_column_name: = t.column_name;

  v_nttab (v_incr) .fnd_govids: = FND_LOOK;

  END IF;

  ------------------------------------------------------------------------------------------------------------------------

  / * This is for DBMS output, thus we have 2 different ways, one can see the results in the table dynamic_counts

  and in the dbms_output

  */

  IF FND_LOOK > 0 THEN

  Dbms_output.put_line (t.owner |) '.' || t.table_name | ' ' || t.column_name | ' ' || FND_LOOK);

  END IF;

  ------------------------------------------------------------------------------------------------------------------------

  / * Exception Handeling * /.

  EXCEPTION

  WHILE OTHERS

  THEN

  Dbms_output.put_line)

  "Generic error".

  || t.column_name

  || "from".

  || t.Owner

  || '.'

  || t.table_name);

  END;

  END LOOP;

  ------------------------------------------------------------------------------------------------------------------------

  FORALL i IN 1.v_nttab. COUNTY

  INSERT INTO dynamic_counts (t_owner,

  t_table_name,

  t_column_name,

  fnd_govids)

  VALUES (v_nttab (i) .t_owner,

  v_nttab (i) .t_table_name,

  v_nttab (i) .t_column_name,

  v_nttab (i) .fnd_govids);

  COMMIT;

  END;

  /

  Are you sure that you are connected to the database to the same user with both clients?

• Command line and Resource Manager

  When you use the command line to compile a Robohelp project, is it possible to update the resources shared within the project before generation?

  For example, you have Project1 and uses snippet1 in this project. However, snippet1 has been changed in the Resource Manager (just say, for the sake of argument, that snippet1 is also used in Project2, and you changed the extract it and it synchronized to the Resource Manager). When you do a regular command line compilation, the extract is not updated.

  Is it possible to synchronize the excerpts and images from the resource manager in the project before proceeding with compiling from command line (other than opening the project and sync manually)? After all, if I have to open the project, there is no reason for the compilation command line since I was already there and can just compile the project.

  Thank you!

  I found a way around this!

  RoboHelp does not care if the files are updated through the application or through Windows Explorer (such as copying the latest file in the project folder).

  I created a simple batch file copies and replace any file that is older than the file that is located in the resource manager. This allows RoboHelp pull into the updated files in a command-line compilation. There is always a way!

  However, I found something problematic with the command line compilation. I started a new thread to ask about it.

  http://forums.Adobe.com/thread/1011261

• Strange error with RHCL RH10 and RH11 command-line compilation

  Hello once again, RoboHelp gurus!

  I feel a strange error using the compilation process command-line rchl in RoboHelp 10 and 11 of RoboHelp.

  Here is the command I use:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl "C:\folder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\log\folder\logfile.txt".

  When I generate the log of the cmd file, I see an error "LILo: BIBCientInit could not initialize" twice in the window of cmd prompt while compiling is the treatment.  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl "C:\projectfolder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\logfolder\logfile.txt" [press ENTER]
  

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML >

  
  

  The created FichierJournal.txt has no mention of ""LILo: BIBCientInit could not initialize "it contains."  Compiling builds without problem, as far as I can tell.

  
  

  The same thing happens when I do not create the log during the cmd file and it errors record right "compensation output folder.  But, it seems to me that the output folder does not actually get disabled.

  
  

  This allows the viewing of the compilation process line by line in the cmd prompt window.  When the compiler indicates "output Compensation folder...". ', the ' LILo: BIBCientInit failed to initialize "error message appears twice, and then the process continues.

  Here's the command:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl 'C:\folder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder '.

  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl 'C:\projectfolder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder"[press ENTER]

  Adobe (R) RoboHelp version 10.0.0.287 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: C:\folder\project.xpj

  Page layout: SSL_Name.

  Output: c:\outputfolder.

  Scanning for the compilation project...

  Review completed.

  ATTENTION: No luggage description of the file.

  From compilation...

  HTMLHELP 10.0.0.287 preprocessor

  Compilation C:\folder\! chm_tmp_folder_0\project.xpj ...

  Preparation create HTMLHELP...

  Compensation output folder...

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  Preparation of the HTML Help files...

  Copying files...

  ...

  It's okay if it's a HTMLHelp or WebHelp output.  Any thoughts on what is this error and what is the cause?

  I've been away from RoboHelp for about 9 months, but I'll be back on the same projects and the same version of RoboHelp 10 and the same compilation process.  The difference is that I have a new laptop.

  Thank you very much in advance for your time!

  EA

  Adobe was able to recreate this issue on their end, and a bug was created for her.

• Visual c# command line compiler

  Greetings,

  About 14 days ago I received an error message at startup 'command line compiler Visual c# has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "I click on 'Close' and after a few more screens (same message), the laptop is now running.

  I studied this during two weeks at three sites including two Microsoft sites. No one has an answer. However, when I searched Microsoft technical support I have referred me to the Sony because of the OEM license. So, I find myself in this forum.

  I found according to my research it is a file associated with this - csc.exe. I don't know if it is the cause or not. From research it is a component in C++ and associated with .NET. When I stop I get another error "the application could not initialize properly (0xc0000142). Click OK to close the application. »

  I have tried to use sfc but only get to 96% and received the message "Windows Resource Protection found violations of integrity." BTW, I'm under sfc since a high cmd prompt. I also ran check and looked at the newspapers. Because the paper is too large, but neither the newspaper for analysis or check all the items close to what I feel, I am enclosing details of the sfc.

  I have Norton 360 with virus update subscriptions and also ran CCleaner and SpyBot (I do it each month).

  I don't know what to do. I'm not a programmer and most of the Visual c# sites are for programmers, and told me that if my post is specific, in writing, or debug code, I need to ask for help from someone else.

  I also did the clean boot, add services, and startups. I can't find the program or the offending service. I am at a loss. I need help. Any ideas or suggestions are appreciated.

  Thank you

  Hello Legman,
  Thank you for your message
  It is quite possible that you may encounter a hardware problem if you have a C drive recovery and that you always encounter the error.
  Try to run the hidden partition hardware diagnostic software.

  to access the partition hidden startup cold.
  Spam [F10] several times from the VAIO logo
  Press ENTER to "Edit boot options".
  Once the recovery tools launch hardware diagnostics select.

  If the hard drive test fails to contact alternative service.
  www.sonyrepairservices.com

• Command line compilation / build and signature

  I'm having a problem minor building my application in the command line.

  Lets take this Simple application:

  import net.rim.blackberry.api.browser.*;
  import net.rim.device.api.ui.UiApplication;
  
  final class AppLaunch extends UiApplication
  {
      public static void main(String[] args)
      {
          // Create a new instance of the application.
          AppLaunch theApp = new AppLaunch();
  
          // To make the application enter the event thread and start processing messages,
          // we invoke the enterEventDispatcher() method.
          theApp.enterEventDispatcher();
      } 
  
      private AppLaunch()
      {
          // do stuff
          System.exit(0);
      }
  }
  

  I use the following to compile the command line application.

  rapc import=net_rim_api.jar codename=D:\AppLaunch\AppLaunch\AppLaunch -midlet D:\AppLaunch\AppLaunch\AppLaunch.jad D:\AppLaunch\AppLaunch\src\AppLaunch.java
  

  a COD, Jar and the rest of the files that all seem to be "compiled" but I get the following compiler error - and the software will not work on Blackberry - although the files are generated and they seem installs successfully on the BB, there is no 'Icon' that is created, and I suppose it has something to do with the compiler could not find the main method :

  ...
  
  Resolving
  Optimizing
  D:\AppLaunch\AppLaunch\src\AppLaunch.java:9: Warning!: method 'AppLaunch.main(St
  ring[])' not invoked.
  Populating
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._description
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appNames
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appArgs
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appFlags
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appPosition
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appIcons
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appNameResourceBundles
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._appNameResourceIds
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._languageResources
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._securityVendorIds
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._securityDescriptions
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._securityKeys
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources..UNDF
  Warning!: No definition found for exported string: com.rim.resources.AppLaunchRI
  MResources._additionalOptions
  No errors.
  

  When I have this build inside the Eclipse, everything works fine and the app works well on the Blackberry.

  Did I miss something specific in the command line for compiling?

  And to save everybody a headache reading this, this is the command to sign the application from the command line (which seems to work):

   java -jar "SignatureTool.jar" -a -c -p  D:\AppLaunch\AppLaunch\AppLaunch.cod
  

  I'm sure I thought about her.

  I had to change - midlet to-CLDC

  rapc import=net_rim_api.jar codename=D:\AppLaunch\AppLaunch\AppLaunch -CLDC D:\AppLaunch\AppLaunch\AppLaunch.jad D:\AppLaunch\AppLaunch\src\AppLaunch.java
  

• "Error: unknown protocol: c ' on the install command line + launch, after 'Throw error' on FB4 install + launch

  Just try to get AIRHelloWorld.as installed and launched on the Simulator, and I encountered some problems.

  With the help of FB4 (v4.0.1), I get the following by following the instructions at http://docs.blackberry.com/en/developers/deliverables/21877/Testing_your_application_from_FB4_134713...

  for the configs of type "Run", he pretended to install and launch, but does nothing. ".

  for the launches of type "Debug", after he sat down to "Waiting for Adobe Flash Player to connect to the debugger" for awhile:

  "The launch has failed."

  "Failed to connect; session has expired.

  Ensure that:

  1. you have compiled your Flash application with debugging on

  2. you run the debug version of Flash Player. »

  The advice of the thread here - http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Launch-Failed-Launching-Error/m-p... - I went to try from the command line with the following command:

  > blackberry-airpackager-bin-debug package AIRHelloWorld.bar - installApp - launchApp - C AIRHelloWorld - app.xml AIRHelloWorld.swf - device 192.168.152.128

  That I get:

  "Error: unknown protocol: c.

  Any help is appreciated.

  Alrighty, for those who wish to learn from my mistake, do not use the default path to your workspace in Windows XP. Place your project files in a path that has no spaces in it. Otherwise the code that reads XML application descriptor will throw and give you this completely useful message on the "unknown protocol".

  For more information...

  According to SUN ( http://bugs.sun.com/view_bug.do?bug_id=6506304 ), it's a regression of jdk1.5, so it can be bound to the version of Java that was used to create the blackberry airpackager. My recommendation to any dev BBPB watch this forum is to use another (earlier? Since jdk6 won't necessarily be released because of the Oracle) jdk for the set of tools... you know, if you want to support default Windows XP installed and you have the time. The solution is pretty easy once you know.

  Alrighty, now off to see if things work!

• Build errors from command line in the newspaper. How can I fix it?

  Version: RH 9 (latest version)

  OS: Windows 7, 64-bit

  Output: CHM

  I have a batch file that uses features of generation of HR command line to generate our CHMS regularly.

  The command line works for my other projects. But I have a project that has three different CHMS issued, and each chm of the project always fails.

  Each three generated log file contains information to that effect.

  Adobe (R) RoboHelp version 9.0.0.228 project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: d:\hg\pcdmisqa\pcdlrn\help\toolkitmodules\PC-DMIS Toolkit Modules.xpj

  Presentation: Toolbox Modules - various.

  Output: D:\DocProjects\Outputs\common_chm\toolkitmodules.chm.

  Scanning for the compilation project...

  Error: Impossible to analyze all project files. Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHTML.

  Any ideas? Moreover, these AIDS compile fine with HR itself.

  Okay, deleting the CPD and reimport the file HHP to recreate the XPJ and all other project files fixed this problem for me. They seem to be build by using the command line now.

  But he created a LOT of work: build all the page layouts should be recreated and all conditional compilation tags had to be regenerated.

  If you go this route, be sure to make a backup of your project first you may have to refer to him to get things back the way they were after the import process.