Compiler in Eclipse error

Similar Questions

• Media Encoder: Error compiling Movie - unknown error

  As the title, I have problems with Adobe Premiere Pro CC 2014 Adobe Media Encoder CC 2014 and - "Adobe Media Encoder: error compiling Movie - unknown error" appears each time I try to export my video. Both are trial versions, but my Adobe Media Encoder CC 2014 had ended and my Adobe Premiere Pro CC 2014 have left about 1 week of trial. Please help as soon as possible because I have to do a large project for my school, so cannot function without these great apps. Thank you.

  Hi Charles,

  Have you tried to export with Premiere Pro?

  Go to the file Menu in Premiere Pro > project settings > general and change 'Mercury playback engine' (if it allows) to 'Only software Mode' and then try to export from Premiere Pro.

  Mention also, what operating system are you using, hard RAM (Exxternal or internal), or several installed graphics cards and formats of files used in the project.

  Have you tried to make the scenario first before export?

  If possible send a screenshot of the full timeline.

  Vinay

• Cannot restore: error compiling Movie: unknown error

  Hey there,

  Need help,

  I'm working on a short sequence (15 seconds).

  It has a few stacked video channels and I have applied overlays and fixed most of the color channels.

  The film is XMF files from a C300. Sequence of parameters defined in accordance with the proposed recommendation (IE when I dropped the clips).

  I get the "error compiling Movie: unknown error" message whenever I try to make or export.» I went through a lot of steps suggested by a blog post, I found here - I went through the sequence, removed the clip, has tried to return, then removed the effects.

  When I deleted the effects and buried the clips off side by side he made out for me.  That's great, but I have to be able to export the effects all in and empty them in layers. What can I do? Starting to pull my hair!

  Details...

  CS6. O

  MacBook, 4 GB Ram,

  Graphics card: NVIDIA GeForce GT 330 M 256 MB

  Thank you,

  Simon

  Hey,.

  Thanks for the tip - tried all of those, unfortunately with no joy.

  I have not deleted my cache - also no joy.

  BUT I installed a (now 6.0.5) update and it does.

  Thanks for the help,

  Simon

• packaging Eclipse error

  Start to use eclipse instead of JDE.

  I have an app that seems to do very well. but when I try to create the package, I got the following error:

  java.lang.NoClassDefFoundError: net/rim/tools/compile/compiler
  Caused by: java.lang.ClassNotFoundException: net.rim.tools.compiler.Compiler
  java.net.URLClassLoader to $1.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass (unknown Source)
  at java.lang.ClassLoader.loadClass (unknown Source)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)
  at java.lang.ClassLoader.loadClass (unknown Source)
  at java.lang.ClassLoader.loadClassInternal (unknown Source)
  The main class is not found: net.rim.tools.compiler.Compiler.  Program ends.
  Exception in thread "main".
  Packaging failed (taken 0,142 seconds)

  I searched the forum and did not find anything. Any thoughts on what could be the problem?  Thank you

  It turns out that for some reason, Miss me a rapc.jar file in the plug. Copied my old JDE dir and it works now

• FPGA timing when compiling PID loop error

  Hello.

  I'm using Labview 2011 card FPGA PCI-7833R.

  My problem is that whenever I try to integrate FPGA designed screws in my code, I get an error of timing.  See the photos displayed below.

  In this case, I have an express VI PID which I use in a used while loop (not even timed!) in my FPGA code, but when compiling, I get an error saying that the possible maximum clock frequency is the 43 MHz.

  I have a lot of loops, a few running at 80 MHz.  Is there a way to slow down a specific while loop, so that it runs at 40 MHz and not 80 MHz, as others?  The compiler does not seem to meet the simple addition of a timer loop...

  Thank you

  Orel.

  PS the same thing happens when I try to add a lowpass filter VI of the FPGA code.

  Is it possible that you set the level above 80 Mhz clock?  This is what it looks like to me.  In Explorer, right click on the FPGA target, select Properties, then go to the category "first level clock.

• FPGA compilation I get error & quot; ERROR: ConstraintSystem:58 & quot;

  I use the Xilinx LogiCore IP generator for generating DSP IP for my FPGA.

  The problem is that the names of the generated components are for a long time.

  On the Web site or http://digital.ni.com/public.nsf/allkb/F810E4289A420FE68625796600764C66

  He described a problem very similar to what I have ID issue 309260 "compilation error (ERROR: ConstraintSystem:58) when compiling a LabVIEW FPGA VI which contains a generated from a DSP graph VI.»

  I followed the suggestions and changed my IP to names such as 'A' and 'B '. As a first step, that it did not work, only to spend the entire project to another shorter path of directory did this job.

  Now, when I regenerate the IP address of 'Tools' > 'FPGA Modules' > "Regenerate the node IP" this will rename my IP with an additional random name at the end. So, if I look in my case not only that I have "A.vhd" but now, I'm also having 'A_F27AB4F7464E508DCCB219B2C4271B18.vhd '.

  It's very repetitive, and you should be able to replicate that.

  It's havoc with our software and with our software process control tool. Our database of software can accommodate only names of files of a certain length, and this violates. Also, I now have files with the exact same content but with different names.

  Do you have a fix for this problem as stated on your website?

  Kind regards

  I ended up using LogiCore externally. If you do a search in your LabVIEW FPGA tools folder, you should find "\Xilinx12_4\ISE\bin\nt\coregen.exe" (in the case of the specific version of Xilinx tools you have), it's the Xilinx Logicore exe without the National Instruments candy wrapper.

  I created all of my external LogicCore to LabVIEW (it actually makes life easer, the LogicCore tool has a better Manager to track all your IP LogicCore in any case) and then used the IP LabVIEW nodes to access the intellectual property.

  This has prevented the long names, and now I can better handle the INVESTIGATION period because I can put the code in a folder I want without breaking of LabVIEW.

  -good luck

• Setup Blackberry plugin on Eclipse error.

  I installed eclipse with the following details of the version on Windows XP:

  Version: Helios Release

  Build id: 20100617-1415

  When I try to install the blackberry plugin, it fails with the following error message:

  Can not complete the installation because one or more required elements could not be found.
  Software: BlackBerry Java plug-in 1.1.2.201004161203 - 16 (net.rim.EclipseJDE.feature.group 1.1.2.201004161203 - 16)
  Lack of requirement: BlackBerry Java plug-in 1.1.2.201004161203 - 16 (net.rim.EclipseJDE.feature.group 1.1.2.201004161203 - 16) requires ' org.eclipse.jdt.debug [3.5.0,3.6.0)', but it is not found]

  Has anyone else encountered this problem? Any ideas on how to solve this problem?

  Thanks in advance.

  Welcome to the forums.

  This thread may help you.

  http://goo.GL/tCIB

• Compilation of the error using payment service.

  I took this documentation, but they do not compile in the PRC.  Someone else you have cascading payment service?

  Hello

  #include will fix this error.

• Impossible to compile a (preverify error) LocalizationDemo

  Packaging project LocalizationDemo
  E:\Work\BlackBerry\eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin\rapc.exe -convertpng -quiet codename=deliverables\Standard\5.0.0\localizationdemo deliverables\Standard\5.0.0\localizationdemo.rapc -sourceroot=E:\Work\BlackBerry\Examples\LocalizationDemo\src;E:\Work\BlackBerry\Examples\LocalizationDemo\.locale_interfaces;E:\Work\BlackBerry\Examples\LocalizationDemo\res -import=E:\Work\BlackBerry\eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\lib\net_rim_api.jar E:\Work\BlackBerry\Examples\LocalizationDemo\bin
  Can't open dir E:\Work\BlackBerry\Examples\LocalizationDemo\bin/com.rim.samples.device.localizationdemo.LocalizationDemo?.crb/
  Error!: Error: preverifier failed: E:\Work\BlackBerry\eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin\preverify. ...
  Packaging project LocalizationDemo failed (took 0.39 seconds)
  

  All other samples of works, but LocalizationDemo will give preverify error.

  What Miss me?

  HS! He is a 1 year bug known... Not yet fixed...

  Found the solution.

  You must modify the system locale by default for non-Unicode to English applications. (Regional settings via the control panel)

• Plugin from Blackberry to launch eclipse error

  I get this error after installation of the plugin for eclipse blackberry. (worm is 1.1 - whats ever posted on the site at present)

  Eclipse verision: 3.5.1

  Java version: 6 update 22 (build 1.6.0_22 - b04)

  JRE: 1.6/1.7

  Windows XP SP 3

  Any help on getting this resolved error would be much appreicated.

  Thank you

  Pat

  

  I guess I should have mentioned that eclipse started without problem before the blackberrry plugin has been installed.

  Google and found a recommendation to drop the eclipse.ini and restart eclipse.  Eclipse started without problem.

  Thanks for your help.

• Error compiling movie, unknown error, 2015.4 CC body

  So yesterday Windows installed the following updates:-update for Windows 10 Version 1607 for x 64 systems (KB3176936) - a security update for Adobe Flash Player for Windows 10 Version 1607 for x 64 systems (KB3188128) - function Windows 10 update, version 1607.

  Since this update, first Pro CC 2015.4 fails to preview rendering anything on the timeline, which gives the error "error in compilation of film. Unknown error. ».  No matter if it has video or just the bars and tone on a new timeline, same results of error.  I tried to change the codec of preview rendering, clear the database cache, restart and return under a completely new project, without success.  I don't see Adobe updates for the body from lately, so I'm stuck with this. Oddly enough, I am able to export any type of file without problem as usual.  My other versions installed in the body are also strangely affected by the same error message.  Any suggestions?  Help is very much appreciated!

  Many people, for any of you to also have this obscure problem, I think (I hope), I found a solution.  As already said, the problem seems to affect ALL versions of the body, I installed, as well as nine project files or former organization I created or modified.  That last part, however, does not seem to be the case with the project files that are opened and saved on a Mac.  When the opening of some body of old last project files saved on an iMac, my PC may suddenly noticed that again.  Better yet, by opening the project evil files I created on the PC more on a Mac computer, save the file via Mac and then reopen on the PC again also seems to solve the problem.  So far this simple and overwhelming opening on Mac seems to change something, back to normal as my body of 10 Windows cannot. I hope this helps!

• Compilation of procedure error

  I'm trying to compile a procedure which is supposed to fill the tables with data, but I get errors ignored multiple statements. I'm running out of ideas what could be wrong, because the syntax seems very well. I downloaded the full code here: http://pastebin.com/gTnpj0Jm . Could someone please take a look?

  0566fdce-4035-4cdd-b2da-37d1e2b97e42 wrote:

  I'm sorry, but I searched in my code for a good 10 minutes and I can't find any case to appoint a pl/sql variable same as column name.

  You are right. Question is different.

  DECLARE
  DATE OF BORN_DATE_VALUE;
  BEGIN
  BORN_DATE_VALUE: = Trunc)
  TO_DATE ('2000 ', 'yyyy')
  +
  DBMS_RANDOM. VALUE)
  0,
  TO_DATE ('2015 ","yyyy")
  -
  TO_DATE ('2000 ', 'yyyy')
  ));
  END;

  INSERT INTO STUDENT (ID_STUDENT, F_NAME, L_NAME, BORN_DATE)
  VALUES (S_STUD. NEXTVAL, F_NAME_VALUE, L_NAME_VALUE, BORN_DATE_VALUE);

  BORN_DATE_VALUE range block, in which it is declared. If being outside the block INSERT statement in that born_date_value is declared, INSERT does not know what BORN_DATE_VALUE and assume it is the column name.

  SY.

• 'Error compilation film unknown error' made or export in first or Media Encoder or

  Hi all

  I'll have made troubled and the export of which certainly is a sequence quite complex 2.5 hours of first CC 2015 and Media Encoder. I'll describe the problem, then provide my card, then describe my attempts so far solutions:

  1. The problem: try to make my outside sequence gives the error "error compiling Movie. Unkown Error"at irregular intervals, sometimes after 10 seconds and sometimes after 10 minutes of rendering. It occurs also when rendering of three subsequences that he content and when expporting media first or Media Encoder.
  2. My specs:
     

     Material - I am on Windows 10 x 64-bit on a desktop computer custom built with MSI AM3 + configuration motherboard with an AMD FX6350 3.9 GHz processor, 16 GB of RAM and a 2 GB AMD Radeon R9 380 graphics card, all current drivers.

     Software - creation and Media Encoder are defined to use the reading Mercury (GPU acceleration) engine and the composite linear color, and are both set to update to version updated for release 2015 CC.
     Sequence - I'm editing in square pixels of 1080 p AVCHD, 29.97 frames/second, 48000 Hz sampling frequency, using the only i-Frame MPEG video previews. My sequence has three subsequences, all of them contain a multicam pulling three video sources synchronized sequence (it is a composite event that was recorded live). I export in H.264 MP4 @ 10-12 Mbps with 'Match sequence settings' for the framerate, bitrate and size of the image.

  3. My attempted Solutions: , I started with the basics... Clear your cache of media, delete make files and files video preview, flatten your blocking sequences, export each subsequence individually, create a new project and import the old sequences, all this, trying to render and export between each of these steps. Frankly, I'm bad-shot in the gut. I desperately need to export this sequence successfully and there deliver my video to an audience online and from there, also create versions for DVD and Blu - Ray.

  I'm just wishing so bad for an error code, a clip defective to be identified somewhere, an Executive responsible for headaches, something. Something besides, 'film compilation error. Unknown error. »

  Grateful for any help offered by the community of users of wonderful to Adobe Premiere Pro.

  Hi Nathan,

  Sorry for your troubles. Looks like you have a sequence that should be able to be exported, but can't. To add to your frustration, the warning dialog box has no clue as to what is the error. With what is happening at random intervals, it is really difficult to solve.

  For the latter, the next release of Premiere Pro's warnings more explicit. This update is coming soon. In the meantime, let's work on the export of this sequence.

  Firstly, log a case with support. Here are the details on how to contact them.

  The first thing to look at is your system, I would say. It looks up to the requirements of the standard, however, it is quite a long sequence. If you have lots of GPU based effects and/or Lumetri effects, your VRAM might be out of memory, cancelling export and crashing with error compilation Movie.

  If it was me, my prime suspect. How do you work around that? Avoiding the GPU? In fact, Yes. It will take time for export, most certainly. This could take days. Not much you can do, unfortunately, unless you muscle your hardware. Currently, my guess is that your GPU is probably not powerful enough for what you want to do. In the project settings > general switch to software only.

  Can you avoid this in the future? Yes, with a different workflow what smart favours rendered instead of make or export at the same time with GPU based effects.

  This means that you'd have to transcode the AVCHD video to a codec chip to make and restore the effects along the way in this same codec. At the time wherever you export, you are not typing the GPU because you use files preview instead.

  Info: FAQ: how to speed up making, export or encoding?

  Thank you
  Kevin

• 11.1.1.7 to 12.1.3 Migration - Compilation project ADF error

  Hello

  I have a BPM Application that has been developed in 11.1.1.7 and tested.

  It has a BPM project and a project of the ADF with TaskForms created from human tasks.

  I downloaded JDeveloper BPM 12.1.3 and open the same application.

  The Migration of 11.1.1.7 to 12.1.3 succeeds according to JDeveloper.

  The BPM project gets compiled successfully.

  But the ADF project with task form gives the following compile error. Tried to build after having cleaned the request also.

  I have not found any information on the details of error also. (even after the verbose activation in JDeveloper)

  So I tried to open some other BPM applications working in 11.1.1.7 and migrated to 12.1.3.

  Each of them gave the same error.

  Some of my BPM applications have ADF projects that do not contain the TaskForms created from human tasks and they get compiled successfully.

  I tried to create a new Application of BPM with a TaskForm new since a human task, and it gets compiled successfully.

  Error

  ----

  Error: < J2EE > < BEA-160187 > < weblogic.appc failed compile the application. Recompile with the option - verbose for more details on this issue. >

  It seems that this problem was confronted over early also in earlier versions, but couldn't see it answered in the following positions

  Re: BEA-160187 error try to migrate 11.1.1.4 app to 12 c

  https://community.Oracle.com/thread/2593716

  I was wondering if anyone found a solution for this.

  Appreciate any help.

  Thank you

  Sameer

  I have this same problem.

  I had the same error after importing my 11g 12 c Jdev asks...

  Error:

  I turned verbose on my ADF and BPM projects.

  My BPM project built without any problem.

  My ADF project was the problem... after he complained of the namespace in my weblogic.xml.

  On the weblogic.xml, I've changed that...

  http://www.BEA.com/ns/WebLogic/WebLogic-Web-app">

  for this...

  http://xmlns.Oracle.com/WebLogic/WebLogic-Web-app">

• Compilation of trigger error

  Hello

  I'm new with Oracle technology and I do not understand this error:

  Compilation failure, line 0 (18:19:09) line numbers associated with compilation errors are relative to the first BEGIN statement. This affects only the compilation of database triggers.

  PLS-00801: internal error [ph2csql_strdef_to_diana:bind] Compilation failed, line 12 (18:19:09) line numbers associated with compilation errors are relative to the first BEGIN statement. This affects only the compilation of database triggers.

  PL/SQL: ORA-06544: PL/SQL: internal error, arguments: [ph2csql_strdef_to_diana:bind] [] [] [], [], [], [], [] Compilation failed, line 10 (18:19:09) line numbers associated with compilation errors are relative to the first BEGIN statement. This affects only the compilation of database triggers.

  PL/SQL: SQL statement ignored

  
  

  This is the code:

  create or replace TRIGGER "BI_TBL_GAC_DEMANDES_AMEL"

  front Insert on 'TBL_GAC_DEMANDES_AMEL'

    for each row

  DECLARE

  v_users users% rowtype

  BEGIN

    if : NEW . "PK_ID_GAC_DEMANDE_AMEL" is null then

  -New PK

  Select 'TBL_GAC_DEMANDES_AMEL_SEQ'.nextval

        into : NEW . "PK_ID_GAC_DEMANDE_AMEL"

        from SYS . DUAL;

  -Find the recipient

      Select *

        into v_users

        from users

          where user_name = : v ('APP_USER') ;

  -Send msg responsible plan of action

  Insert into TBL_MESSAGES ( )

           DAT_MESSAGE ,

           TXT_TITRE ,

  FK_ID_EXPEDITEUR

  FK_ID_DESTINATAIRE

  FK_TXT_PROCEDURE

  FK_TXT_STATUT_MSG

           TXT_MESSAGE )

      values (

           SYSDATE ,

  ' New request improvement of,

          v_users . FK_ID_EMPLOYE,

          -- v_users . FK_ID_EMPLOYE,

  111,

          'GAC' ,

          'NEW' ,

  ' A new improvement request has been created and your intervention is requested '()

    end if ;

  END ;

  Thanks for help.
  

  > where user_name =: v ('APP_USER');

  incorrect syntax above

  What are you trying to do here?

  How can I ask a question in the forums?

  https://forums.Oracle.com/forums/thread.jspa?threadID=2174552#9360002