Complete system folder

Similar Questions

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• How can I move files to the system folder?

  Hi all

  I was wondering how to move files to the system folder. With the update to El Capitan and the former program is no longer works and the developer suggests moving some files on the system folder that should fix it, but even if an administrator account I don't have write access to the system-> library folder where they need to go. Any help would be appreciated.

  Thank you!

  Steve

  In short: you do not have. The folder/System is only for Apple.  The new protections in El Capitan make it impossible for you to place the files.

  This is what the folder/library for: install additional components to the system, but keeping them separated from the basic installation.

  What software are you trying to run? What files we told you to move? I'm curious to know what type of developer will tell you to put the files in / System.

• computer laptop vaio vgn-c290 and inability to restore the complete system

  I have a vaio laptop vgn-c290 (windows vista Home premium), using the f10 at the system startup key, tried to restore the complete system (c :) drive), but installing custom programs stopped at 55% 'installation click on dvd' feature. I waited about an hour to see any progress but nothing happened and I had to interrupt the installation process and windows not installed correctly. Please help me find a solution.

  Thank you very much.

  Hello

  Thanks for the post.

  Reset the BIOS:

  1. Turn on computer > F2 key.
  
  
  2. Then, reset the BIOS.
  
  
  3. Use the arrow keys on the keyboard to find the "Exit" button, and then select an option "Load optimized defaults or.
  
  
  4. Save the settings and exit the BIOS setup.

  If the problem persists, run the recovery:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41931

  If the problem persists, contact Sony service team:

  http://eSupport.Sony.com/us/p/service.pl

  If my post answered your question, please mark it as an "accepted Solution".

• Change of name for the system folder

  I want to change the name of the folder owners precedent (in Documents and Settings), 'Bill', 'Sarah' (this computer was given to my daughter).  I get a message, "Bill is a Windows system folder...". It cannot be moved or renamed. ' Really?  Is it not there not simply changed the name of this folder?

  Instead of changing the name of the file:

  1. Create a new user account named "Sarah".
  2. Copy (s) desired documents, photos, music and other files from the account of the Bill of Sarah.
  3. Remove the account from the Bill.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How to change the name of a system folder on the XP computer I currently own

  I want to change the name of the system folder. When you open a file, it says the name of the document\ system I want to change\ folder locateing is the name. Please help me.

  1 create a new user with administrator rights
  Accounts start-settings-control panel - user - create a new user account
  Be sure of what she had administrator rights
  else log in to any user account that has administrator rights
  Start-Run-type regedit-ok
  HKEY_LOCAL_MACHINE \ logiciels\ Microsoft\ Windows NT------CurrentVersion \ ProfileList
  Verify that the list below, you will find ProfileImagePath on the right panel
  also, you should find a %SystemDrive%\Documents and user name Settings\old
  Double-click the ProfileImagePath you can simply rename the last user name it
  and start-run - type %systemdrive%\Documents and Settings
  
  
  change the old file name
  If you are in doubt click on this link below
  http://WindowsXP.MVPs.org/UserPath.htm

• Rename the system folder.

  I inherited a computer at work. How can I change the computer registered to? The former owner is under documents and settings as a system folder of windows that cannot be renamed.

  With a used computer, regardless of its origin, recommended is to do a clean install of Windows. Then you can configure it with your own information.

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If for any reason, you can do this (not recommended):

  http://www.dougknox.com/xp/utils/xp_change_owner.htm - Change the owner/company registered MS - MVP - Elephant Boy computers - Don ' t Panic!

• Restore complete system crashes at the installation of ms works bundle

  When you try to restore the complete system on a windows vista computer it keeps getting hung up to install MS Works Bundle. I was able to load all food 3 DVD then when it gets to the screen of custom installers it starts to install everything and then to hinder.

  The screen has several windows. We have the Windows installation and it says that Windows is now put in place the following... Factory process 1.
  The second window has the full system restore with a progress bar (always stuck at 59%) with installation of Microsoft Works SE 9.0.
  The third said install MS Works Bundle... Installing the required software. It may take a few moments.
  I left twice to run at night and always, it is stuck on this screen and goes no further.

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Temporarily disable any security software and then try to restore your system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  If this does not help, test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• KB2446708 has downloaded on the complete system of 21 times on Win Vista 32 bit SP3

  KB2446708 has downloaded on the complete system of 21 times on Win Vista 32 bit SP3

  How does this apply to Microsoft Security Essentials?

  See http://answers.microsoft.com/thread/72c67372-e968-e011-8dfc-68b599b31bf5

  PS: There is no SP3 for Vista.

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the system folder?

  Why is the empty system folder (local disk: C > windows > system)... I was just tinkering and I noticed this strange problem: /... .my os win 8 help will be appreciated :)

  It is supposed to be empty.  The only reason why it's the same, it is just in case some older or poorly constructed programs trying to find it.  Basically, for reasons of compatibility, so old/bad programs don't crash.

  There are actually a lot of this in Windows.  For example, years (2006), the 'Documents and Settings' folder has been renamed 'users', because it is easier, not of spaces and other reasons. But some programs are built to search for "Documents and Settings" instead of using the method of detection of the program.  These bad programs would be would break if you installed on another language because (duh) other languages don't misspell the folder the same as in English.  So to try to keep these bad programs to plant, there are all kinds of things like that.

• 20141 CC of Dreamweaver launch - the complete system OSX application memory

  Running on Mac OS 10.10.2

  16 GB memory

  After that I tried to launch Dreamweaver, a warning about the application complete system memory requires me to leave Dreamweaver.

  I tried to uninstall Dreamweaver of CC and reinstall by removing my Dreamweaver preferences, restart the computer - in vain.

  Help, please.

  Update: seems to work again - update Java 8, Dreamweaver uninstalled CC 20141 (also the permissions removed), restart computer, reinstalled Dreamweaver CC 20141 and now it finally works again.

• Accidentally deleted the 'sent' folder (empty). How to restore as a system folder?

  I accidentally deleted my file 'sent', which was fortunately empty. I can to restore a "Sent" folder, but it is not now a system and falls down my lists alphabetically. How can I make a folder system, remaining near the top of my account.

  Thank you

  Go to account settings, Copies and folders, assign the folder "sent" with the envoys. If this does not work, use the other.
  That solve the problem?

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• I used download exec to install for FF & save on USB key to reinstall after a complete system restore last one I have is FF12 can do with FF27 or even 26?

  I'm used to be able to download the exec of set-up for FF and save it on a USB key to reinstall offline after a complete restore of the system. This is very useful. The last one I have is FF12, so after a restore, I now install FF12 so I can take care of tasks offline restore without having to resort to IE. When I go online I go from FF12 to the latest version. Is there a way I can save the exec of set-up for FF27 or even 26?

  Hello, you can download the offline full installer for your system https://www.mozilla.org/firefox/all/