Problems when I want to update my complete system Mavericks using a USB key with the installation program.
I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.
With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.
I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.
It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).
I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?
Thank you and what is Berlin
You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.
Bootable USB Flash Drive-Diskmaker X
Tags: Mac OS & System Software
Similar Questions
-
Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you
Hi Sammo,
See this thread: Re: photoshop, 'kernel security check failed'
Kind regards
Claes
-
I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?
HelloMain objective of this forum is on Microsoft Products only.I suggest you to contact the support of Audacity for more direct action on the issue. -
I have problem when I want to update skyp and other aplications of the store
the above is my problem
Hi Colette Khan,.
1. that you get an error trying to update the application?
2. don't you make changes to the computer before this problem?
You can try to run the utility of troubleshooting Apps. This tool can automatically identify and fix problems with the applications. It is available in English only, but will work in all languages. If the problem persists, refer to this article and check if that helps.
What to do if you have problems with a soft: http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app
Response with the State of the question and we will be happy to offer you our help.
-
I had just installed the left right languages. When it's over, I restart my system. Then, I click regional options and go to the languages tab I click on details and then when to add it to the languages tab appear, there is no Arab as egypt, u.a.e and much more. the Arabic keyboard layout only asdf Eastern and Western... help please...
Hello
You always have this language problem.
You will need to check the option in the second tab (installation script language complex...)
You will then see the other languages such as Arabic - Egypt
-
every time when I want to update my ios software .it shows the message "unable to check the updates.
Try to update via iTunes.
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
Also, take a look at this thread:
After completing the steps above, try to update your device once more.
-
I have photoshop CC. My LR is always LR 5.7. Why isn't it LR 6. When I want to update, I got the message. There is no update.
From my experience, when the app desktopp starts to work, the only thing that will fix it is to run the cleanup tool:
- Uninstall the desktop CC application.
- Restart your computer.
- Download and run the CC cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems
- Follow the instructions in the cleaning tool - you want clean Adobe Creative Cloud Desktop.
- Restart your computer.
- Download and install the application of Office CC from here: Download Adobe Creative Cloud apps | CC free trial Adobe
-
Question
I have a problem when I want to print an email page.it shows me an error that seems to come from a program that blocks the emerged Windows.ce do sais.what do? EditCan you check this problem on Firefox 9?
-
Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.
The "General" cloud requirements are quite low... so you have to ask in the forums of specific program for a special features used by individual programs
For video editing Premiere Pro, go read it in community: Forum Hardware | Adobe Community
-
I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?
(1) temporarily disable your security/antivirus software
(2) download iTunes from the official source: http://www.apple.com/itunes/download/
(3) try to reinstall
(4) turn on your anti-virus
-
Problems with the installation of updates for Windows Vista security: error 80070490
Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.
Hi AndraP,
Since these are updates important, even if you hide updates, you may need to install the update at some point.
You can try to perform a clean boot and try to install the stand-alone package containing the updates.
Step 1:
You can perform a clean boot state.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.
Step 2:
Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:
KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)
KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)
KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)
KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)
KB2345886 for 32 bit: Update for Windows Vista (KB2345886)
KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)
KB970430 for 32 bit: Update for Windows Vista (KB970430)
KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)
KB972145 BOF 32-bit: Update for Windows Vista (KB972145)
KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)
-
problem with the installation of the updates updates 12
original title: problem with installing updates 12 updates, impossible to install, but all others have taken
I have a problem with the installation of updates, some have taken while 12 others impossible to install. I tried the Mr. fix, but will not be too much work.
Hello
1 did you change on your computer?
2 are you able to install some other updates?
Method 1:
Try to reset the Windows Update components
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 how to back up and restore the registry in Windows
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2:
I also suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 3:
I also suggest you to see link and check.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)
Yes, copied files from Nikon NEF, DNG.
-
Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g. By your answer on 5/19, I downloaded HPPIW. EXE and it ran. It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard." Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?
Hello
If please try following the steps below and check if this can solve the problem:1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
7. run the installation file and check all difference.Kind regards
Shlomi -
I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?
After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.
Anyone know how to fix this?
Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!
____________________________________________________________________________________________________________
Dell Inspiron laptop about 4-5 years.
Running windows 7 Home Edition.
Does not start little matter what I tried.
If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.
I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.
Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A
Hello
Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.
You can try the following methods and check if it helps.
Method 1:
You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:
- A master boot record (MBR)
- A boot sector
- A Boot Configuration data (BCD) store
Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe
Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
http://support.Microsoft.com/kb/927392
If the problem persists, proceed to method 2.
Method 2:
Please follow these steps:
- Tool command prompt open in the mode of the Windows recovery environment .
- You will see X:\Sources
- Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
- After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
- Restart the computer once the chkdsk command has completed.
Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.
For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
Maybe you are looking for
-
Change the characters of the language in the old text/edit the document
I have an old 60-page text/edit document that I need to use. It was written in Lithuanian, but now when I open it the Lith print. Letter are random symbols. Is there a way I can easily change everything that the original characters from Lith were?
-
My laptop makes a sound rattle noise
Hello My laptop started making a rattling sound when I use it... fan area I think. I vaccumed the fan in the case where the problem - was there some dust in it - but she continues to shake occasionally after I turn it on. Should I stop using my lapto
-
How can I open the Satellite A30?
Well a little accident that caused part of the cooler under the laptop broke so I need to install a new one, but I can't open the computer... I removed all the screws, also the battery and 2 screws behind the laptop that are covered by a black dot, b
-
Subvi in the main program output data
Hello I'm trying to export data from sub - VI for the main program in real time. But I found the value may be filed only when the Subvi is finished. I'm doing some research and I think that using the queue is the best, but the global variable. You ca
-
All of a sudden, I get a message windows needs validation.
validation of XP All of a sudden, I get a message windows needs validation. When I try to make this get message that it is not authentic. I had this XP for a few years and it is very certainly authentic. Help would be appreciated