completed the explorer.exe process and also can't start Task Manager

Similar Questions

• high utilization of the processor in the Explorer.exe process

  As the title suggests, the fix didn't help me with this problem.

  The Explorer still consumes 99% - the power of the CPU after opening a folder that contains .wav files.

  Here is the link to the support thread: http://support.microsoft.com/kb/976417/en-us/

  * Title *.
  CPU utilization remains high in the Explorer.exe process after opening a folder that contains the corrupted .wav files - even after using the KB976417 Hotfix

  You can determine exactly what causes most of the performance issues by following the steps below:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Strange the Task Manager warning when you try to complete the csrss.exe process.

  I have recently had a few horses Trojan one my system. In my paranoia I'm looking for anything that could be a virus remaining. I was looking through my list of remaining process and ensuring that everything was legitimate. I was watching csrss.exe to check to see if it was in the right place on my computer. When I right click on the process, I accidentally hit end process. The warning displayed was different from warning of other processes that I tried to stop, he said "you want to interrupt the system process"csrss.exe "? To end this process stops the operating system immediately. You will lose unsaved data. Are you sure you want to continue? "Then below, there was a box that says 'give up unsaved data and close '. When this check box is selected, a button that says closed which was gray now became available to click.  I just found it strange and I've never seen this warning before ending other processes.

  IF YOU DON'T WANT TO READ ABOVE:
  The warning was "you want to interrupt the system process"csrss.exe "? To end this process stops the operating system immediately. You will lose unsaved data. Are you sure you want to continue? »

  Underneath, there is a box that says 'give up unsaved data and close '. When this check box is selected, a button that says closed which was gray now became available to click.

  Thought it was strange.

  Well, it's because you probaby not tried to put an end to such a crucial process before.

  Os the Client/Server Run-Time Subsystem CSRSS is an essential subsystem that must be running at all times.  CSRSS is responsible for console windows, creating or deleting threads, and implementation of some parts of the 16-bit virtual MS-DOS environment.

  It's like saying, "Hey - you don't need this wall in your home, you?

• When I close Firefox, the window closes, but the Firefox.exe process and the plugin container continue to run in the background and should stop using Windows Task Manager.

  This happens frequently. Something in Firefox continues to operate even when the program is closed. The process must be stopped before I can open Firefox again.

  https://support.Mozilla.com/en-us/KB/Firefox%20hangs
  See hang-to-output

• I have a bug with the icons. all the icon open by paint, internet Explorer etc. And I can't start them. So please help me if it is wrong hospitales send you a picture

  http://S1150.Photobucket.com/albums/o606/Valyo95/?action=view¤t=c385264a.PNG---qui is an image.
  This happens when I tried to open a file and I open it with Notepad and then everythink vhanges like that. I tried different programs, but nothink happens.

  http://S1150.Photobucket.com/albums/o606/Valyo95/?action=view¤t=c385264a.PNG---qui is an image.
  This happens when I tried to open a file and I open it with Notepad and then everythink vhanges like that. I tried different programs, but nothink happens.

  Use this tutorial:

  Restore the default file type associations

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Scroll down to exe - executable application files.
  Click on the exe

  Follow the instructions from #1 to #6 in the upper part.

  Scroll to lnk - shortcut link (LNK) files.
  Click on lnk

  Follow the instructions from #1 to #6 in the upper part.

• In Windows 7 we select several lines of data that are in a different location on the page (no continuous lines) through the mouse or keyboard and also can we copy all lines of these different at the same time to paste somewhere else in one fell swoop.

  > Now I'm unlable to select more number of lines that are not a sequence in a single page to copy the data rows and paste somewhere in one fell swoop.
  > Is this concept implemented in Windows 7. ?
  > Is there a provision (method) to select several lines that are not continuous across the keyboard or the mouse in windows 7?

  Byagaris,
  It depends on what program you are trying to copy and paste into.  You are able to select continuous, multiple lines, by using the Ctrl Key and clicking, or by highlighting the desired line.  For example, I held the Ctrl key and then, using the mouse, has highlighted several different phrases in the various paragraphs, and could then copy them.  This feature is available for several versions of windows.
  If you are not able to perform this action then post what happens when you try and what program you try it.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to locate the Explorer.EXE component, this application could not start because iertutil.dll was not found. Reinstalling the application may fix this problem

  This problem occurred immediately after the installation later microsoft update 02/08/2012

  clearly the result of the last update of windows xp

  Hello

  Try to uninstall and reinstall Internet Explorer 8.

  1-click Start > run type cmd and press enter

  2-copy following order %windir%\ie8\spuninst\spuninst.exe and right-click on cmd window and select Paste and press ENTER.

  3. After uninstallation, restart your computer

  4 - Download and install IE8 from this link http://www.microsoft.com/download/en/details.aspx?id=43

  I hope this helps.

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't find the fix_svchost.bat file update. The svchost.exe process is spiking the CPU at 100% after the computer crashes.

  Original title: I can't find the fix_svchost.bat file update.

  I'm in you process of having my computer running faster. The svchost.exe process takes 100% of cpu memory and computer dthe freezes. A friend of mine told me a method to solve the problem, but I can't find the fix_svchost.bat update. I went to microsoft update center and don't find any results at all, and I don't know another place to look for. I think that the update does not even exist.

  I could send you a fix_svchost.bat file, but I don't think it's the starting point.

  What you need to do is run a few respectable scans for malware first, and then see if any of you are your svchost.exe process is still badly behave.

  Behind each of the svchost.exe process that see you in the Manager of tasks can be one or more process of XP you have to be running, but malware is KNOWN to imitate or hide behind a svchost.exe process, so you won't be able to see in Manager tasks.  You have to outsmart it.

  First yo should make a reasonable effort to eliminate malware, and then start troubleshooting - not the other way around.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

• I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files

  I can't find my old emails that is to say the last 4 years e-mails have disappeared. I can't see in the 'archives' folder list and also in my list of "local" files
  I recently formatted my system. It causes this problem? Is there anyway to recover my emails?

  Assuming that really format you your hard drive.
  Can erase you every single entry to a file, message, photo, program, document, etc. When you select format you get warnings on this subject.
  The format is the last thing you want to do without going through a backup of your personal and important files.

  Local folders is automatically created when you installed Tbird.
  And it is empty until you move something over there.
  (Your former local folder with all its files and messages has been removed under format).

  Only messages that are still on your server (stbeehive.oracle.com) can be recovered.

• I bought the PDF monthly Pack and I can't open my files on my software of the company. I click on a document and a screen comes up asking me to buy something. I already have. Also before you buy the PDF package I got was able to open my documents of the c

  I bought the PDF monthly Pack and I can't open my files on my software of the company. I click on a document and a screen comes up asking me to buy something. I already have. Also before you buy the PDF package, I was able to open my documents of the company. WTF thank you

  Have you by any chance also tried Acrobat Pro, have a trial version for 30 days, and it is now out of print? If so, you must uninstall it.

• Infect winlogon.exe, explorer.exe virus and virus Hosts-DNS

  Hi guys,.

  A laptop computer, that I'm not using has recently been infected with a virus from winlogon.exe and explorer.exe and one DNS host virus.
  I tried to use avast: edition free, malwarebytes and spybot search and destroy.
  And as a last resort, I used Norton Power Eraser...

  The problem is not cleaner Antivirus or antispyware can eliminate this type of virus.
  And not boot into safe mode and try to remove it from there do not remove viruses at all.
  I took this laptop a laptop technician where he took out the hard drive and scanned for viruses, but when I came back the virus or on it.

  What can I do to remove these viruses, since it has severely reduced performance on my pc and the virus's keep redirect my Web pages, I will be using internet explore?
  I think that the virus has embedded themselves inside the windows operating system.

  Thank you
  Brent

  Hi mate

  Usually the explorer.exe, winlogon.exe are running Microsoft files and these files belongs to the Windows operating system and must be placed in the folder C:\Windows\System32.
  If it a case then these are not viruses.

  However, you can try the Antivirus application free Avira Antivirus software.
  Google for it you can download it for free.
  Scan the system and check again.

  As a last option, I recommend reinstalling the system using the Toshiba recovery disc!
  That would erase everything from the HARD drive.

• Explorer.exe stops and restarts constantly - I have a solution but its only temporary.

  Had no problems with Windows 7 for a year. Then recently explorer.exe stops and restarts repeatedly, over and over again each 5-10secs. Our Event Viewer error is a .dll module in User\User blame name\Apps\Local\, called eciwavatebiwe.dll. I find this .dll and when I rename the judgment falls down, but instead I raise an alert at startup that windows does not find this file (I click just the red x).

  I used virus and sfc/scannow ladies, but no error reported.

  The file in question announced swapper Windows NT caps lock ctrl but Googling is not this .dll anywhere.

  Any ideas what going on?

  Chris

  eciwavatebiwe.dll is a virus what I see. Remove it and start regedit.exe and findeciwavatebiwe.dll and delete everything you find.

  Also scan your system with your scanner, AntiVirus and Malwarebytes' Anti-Malware (http://www.malwarebytes.org/mbam.php).

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I have age of empires 3 and I can not start the program.

  Hello

  I have age of empires 3 and I can not start the program.
  The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.

  Thanks for your help

  David

  Bink is what plays the scenes cut in many games.

  Installation folder of AOE 3 the binkw32.dll should be in games.
  If it is then it is may be damaged and reinstall the game normally would set the
  problem.

  AutoPatcher.exe - I do not know because I never use auto-patchers with games.
  I have always to download the patch and install manually.
  However, my game has the RockallDLL.dll file.

  I don't really know a good site to lead you to these files.
  You can find a binkw32.dll in another game. Try doing a search of
  Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
  folder of the master installation.

  There was a lot of discussion on these forums about AOE3 so a
  search of these forums may find another suggestion.
  You can also try the specific AOE3 forums-

  Age of Empires Forums - Forums

  Age of Empires III heaven Forum

  .

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings