System does not recognize external HDD ALU2, 2 TB silver

Similar Questions

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

  Just out of curiosity, why all these steps? Why not simply do step 9?

  1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

  2. I wanted to do some (possible) that your computer is not infected.

  Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• I installed Kaspersky Anti-Virus 2011. But the system does not recognize.

  Kaspersky Anti-Virus 2011, I installed on my vista system and everything was fine, but now all sadden the system does not recognize it. could you please help me with this?

  Hi gigikhanoom,

  1. you receive messages or error codes?

  2. you remember to make changes to the computer before this problem?

  Windows doesn't detect all antivirus programs, and some antivirus programs report their status to Windows.

  If you receive notifications related to security on your virus protection software, but you know that your antivirus software is installed and updated, you can follow the steps below to stop receiving these notifications.

  Note: You should only do this if you are sure you have a complete and up-to-date antivirus program installed on your computer and that real-time scanning, which checks every file before it opened or used, is turned on.

  For more information, consult the following link:

  Use antivirus software that Windows doesn't find

  If you're still having problems, then you can try to uninstall and reinstall Kaspersky and check.

  You can visit the links below to uninstall and reinstall Kaspersky:

  Uninstall or change a program

  Standard installation of Kaspersky Anti-Virus 2011

  Hope this information is useful.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.

• Satellite C50-B-131 does not recognize external hard drive

  I used an external hard drive to back up my data. Suddenly my laptop (C50-B-131) says it does not recognize the device. Any help is welcome. I tried to uninstall and reinstall the driver for the drive.
  Thank you

  Have you tried another USB port?
  The backup drive works on another PC?

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Sync system does not recognize the device

  original title: synchronize the system used to recognize my device. Now it is not. Device driver indicates that it works correctly, but I can't download songs or videos.

  My system to Sync Windows Media Player does not recognize when my Samsung Captivate phone is connected.  When I got him on the phone, all worked fine, but now it doesn't.  I would like to transfer new songs and videos to my phone, but the system doesn't seem to know that the phone is connected.  All drivers are in good working condition.  Computer knows the phone is plugged into the screen of pilots, but not on the generic details screen.

  Hi michie75,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can run the fixit available in the link below and

  Equipment and devices not getting not detected

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  Check if the sync settings are correct. To do this, follow these steps.

  a. open Windows Media Player.

  b. click the arrow below the Sync tab, point to the device and then click Advanced Options.

  c. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.

  d. restart the media player.

  e. the next time you want to sync, connect the device to your computer, click the Sync tab, and then click Start synchronization.

  For more information, please visit the links below:

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  "Windows Media Player sync: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My reading and writing system does not recognize the DVD. For this CD. I don't know why.

  For a long time my system CD/DVD in my laptop Del Estudio 1537 worked perfect. But all of a sudden my computer does not recognize or read or burn DVDs. Can you help me fix this problem?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Vista does not recognize external hard drive (LONG!)

  I bought a Terrabite Cavalry USB Mass Storage 1 unit some time around January 2009. We used it to back up my computers portable wife and daughters without any problems (it was Windows XP a Windows Vista). Shortly after, we have tried to back up my desktop computer, also running Windows Vista, but my computer does not recognize the drive into any USB port. After this attempt, we get is more willing to work on any computer. We contacted the cavalry and they replaced the drive, but we lost a lot of data since most of the files saved on my wife and daughter desktops have been deleted to clean up their hard drives.
  When I received the spare drive I backed up my computer with no problems.
   
  We moved from NC to PA in August of last year and had packed the new car. Recently, we unpacked and used to transfer ALL the photos of my wife, numbering several hundred, again with no problems. In addition, she has saved his computer using the Vista utility. Today, I made the horrible mistake of trying to back up my computer using the same player. I had completely forgotten the previous question. Yet once, my computer did not recognize the drive, any USB port used or on the tabs 'computer '. When the drive is plugged in and turned on, it will be not even allow us to display the elements on the tab 'computer '.
   
  And now, just as before, the player no longer works on my wife's computer either. THIS IS AN ESSENTIAL QUESTION! If we cannot access the drive over 500 photos of our family, covering more than 5 years are lost forever!
   
  Although I've read similar questions on this site (especially in regards to Windows XP) I can't find the one that is exactly the same problem as this.
  There is nothing wrong with my computer. Each USB port works fine. I tried other USB devices with no problems of any kind.
   
  On both computers, if you connect the external drive and the power up it starts with a light blue on the front as it is supposed to. He then became red and Windows makes the normal audio alert, as it does with any USB device plugged. On the bar, the new icon 'Remove hardware safely', says but clicking on that alone causes the computer to get ung place intil the drive is unplugged. The same is tru if we try to access the tab "Computer" in the Start Menu. The computer attempts to load the itms 'Computer' but never the completion of the task. THE TWO COMPUTER DO EXACTLY THE SAME THING! My wife uses a Dell with Vista Home Premium and I use an EMachine with Vista Home Basic. And this issue seems to happen only after using his computer to mine, not the other way around because I had done a backup on thise drive when I got last year and she just did a new now on his own.
  I wrote to the Cavalry, but received no response. They said the last time that they aren't able to recover lost data, and it is said that all over their site.
  The external drive is a cavalry model # CAXP3701PA.
  Someone please help! Pictures of our last five years (including photos of my wife of his precious Golden Retriever from puppy to now) are lost if we cannot solve this problem. It seems that the player works well, but something corrupting of the software driver. We tried again to my wife's computer o and it begins with "Download driver software for device" but then what I described before using it.
  Any suggestions would be greatly appreciated.

  Hello

  Put the disc in a real store of the computer (not the leeks and the glances at a Best Buy or other stores)
  and they can remove the drive from the case and put it in another computer to back up data
  to other media. Of course this cancels any warranty and may not work if the drive has probably
  in fact failed. Data can often be recovered since a failed drive while it's expensive.

  (The drive could be put in either your PC as a 2nd drive).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Recovering the Windows system does not recognize the hard drive

  Computer does not recognize the hard drive when booting.  Guard gives me 1782 disk error.  Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere.  Computer was working fine this morning and then I stop when I turned it back on it was not properly start.

  I have a zt3000 running xp sp3

  someone please help me, thanks

  Hello

  Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.