Component rules generator

Similar Questions

• CSA - deletion rules?

  Management Center for Security Agents Cisco v4.0 - 1 build 544

  Configuration--> policies--> quarantine network--> rules to change Module--> of network access control

  Then, you delete by mistake a rule... YIKERS... but you have not clicked on generate rules--> generate again.

  Is it possible to revisit this rule?

  What bring the default set of rules?

  More curious than anything whatsoever. The a doc I've read don't develop much. You are welcome to send me links to documents on the Cisco site. I have access to most of it.

  Thank you

  Jeff

  Not that I know of. You could do a restore configuration (if you set it to automatically back up), but it looks like you just make the rule. You will lose all changes made since the backup well.

  A best practice, in my opinion, is to clone all the policies that you will work with and make changes to them rather than the default ones. This way you always have the default policies to watch. Unfortunately he is unable to help you...

• rules of the clues in the text and oracle query using matches

  Dear all,
  
  I would like to ask questions about the function of rules and matches the oracle text.
  I followed a lead in the oracle text application developer guide.
  I have a table of rules like this:
  
  1 oracle
  2 larry or ellison
  3 oracle and text
  market share 4
  
  Then I create an index in this table. This is necessary for the matches function call. Here's the syntax:
  
  create index queryx on queries (query_string)
  indexType is ctxsys.ctxrule;
  
  Then, I noticed that the result on DR$ QUERYX$ I table as follows:
  
  0 2 2 1 LARRY (BLOB)
  MARKET 0 4 4 1 (BLOB) {MARKET} {ACTION}
  0 1 1 1 ORACLE (BLOB)
  0 3 3 1 ORACLE (BLOB) {TEXT}
  0 2 2 1 ELLISON (BLOB)
  
  What I want to ask is why do the words 'share' and 'text' appear in the DR table $ QUERYX$?
  
  When we use the function of the matches, it can search on the result of the index and therefore he walls can't find the word 'action '. Thus, when for example I ask like this:
  
  Select query_id queries where matches (query_string, "it only to share ten percent of all products sold") > 0
  
  It will give 0 results since no words in "it only to share ten percent of all products sold ' was in the index table. But in fact it could possibly be classified as category 4 rules which is "market share".
  
  I tried this in a large data set and get the same result.
  Here are my rules generated from my collection of document:
  
  1 {REQUIREMENTS of} & {ELICITATION}
  1 {REQUIREMENTS of} ~ {ELICITATION} & {ACTOR}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} & {FURPS}
  1 {REQUIREMENTS OF} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE} & {PROC}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE} ~ {PROC} & {SPEED}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE} ~ {PROC} ~ {SPEED} & {PDF}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE} ~ {PROC} ~ {SPEED} ~ {PDF} & {SET}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE} ~ {PROC} ~ {SPEED} ~ {PDF} ~ {SET} & {UNNECESSARY}
  1 {REQUIREMENTS of} ~ {ELICITATION} ~ {ACTOR} ~ {FURPS} ~ {OUTLINE} ~ {PROC} ~ {SPEED} ~ {PDF} ~ {SET} ~ {UNNECESSARY} & {MISUSE}
  1 {INTERPRETATION} ~ {REQUIREMENTS}
  2 {DESIGN of} & {PERFORMANCE}
  2 {DESIGN of} ~ {REPRESENTATION} & {MAY} & {FOUNDATIO} & {OCTOBER}
  2 {DESIGN of} ~ {REPRESENTATION} & {MAY} & {FOUNDATIO} ~ {OCTOBER} & {PROCEDURAL}
  2 {DESIGN of} ~ {REPRESENTATION} & {MAY} & {FOUNDATIO} ~ {OCTOBER} ~ {PROCEDURAL} & {STRICT}
  2 {DESIGN of} ~ {REPRESENTATION} & {MAY} & {FOUNDATIO} ~ {OCTOBER} ~ {PROCEDURAL} ~ {STRICT} & {ENTER}
  2 {DESIGN of} ~ {REPRESENTATION} & {MAY} & {FOUNDATIO} ~ {OCTOBER} ~ {PROCEDURAL} ~ {STRICT} ~ {ENTER} & {NUMBER} & {LAYER}
  2 {DESIGN OF} ~ {REPRESENTATION} ~ {CAN}
  3 {PM} & {TEST} & {ATTRIBUTION}
  
  And this is the result of table with a ctxrule index:
  
  (only the column token_text shown)
  PM
  DESIGN
  DESIGN
  DESIGN
  DESIGN
  DESIGN
  DESIGN
  DESIGN
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  REQUIREMENTS
  INTERPRETATION
  
  so when I try to file a document with the word in there way, it should produce category 1 (based on rules), but since there is no word 'plan' in the tabel index, matches will return 0 means that the document is classifiedto not any category. I don't understand why this is happening. Everyone knows about it? I'd appreciate any help.
  Thank you very much.

  Share market means that the market immediately followed word on the part of the word, so if you don't have the word share then is not a match. If she had walked or hand, then he would be looking for just one part.

• Automatically assign IDS for all the components in JDeveloper

  Hello
  
  I have several pages of components 11g ADF without ID and I would give them all the more painless codes possible. Y at - it order for the assignment of the ID of all the components of the Nations United-IDed on a page? Can I do a project at the same time?
  
  I use 11g.2 JDeveloper.
  
  
  Thank you
  
  Mark

  Hello

  Reach

  Tools | Preferences | Audit | Profiles (make sure that the bos select profile is set to "Help Code" |) Rules | ID of component rules | Check the ID when ADF Faces is present

  Select it and the value "Default Fix" option to generate unique IDS

  So OK, the dialog box, select the project to check this on and choose:

  Build | Audit

  Choose "Code Assist" and Run

  Frank

• Impossible to compile the FPGA in project

  Hello I get the following error when I am trying to compile an FPGA VI on a Compact Rio 9022, I missing something on my stand in? Everyone has seen this before and know what is happening? An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: 7 error error component the generator module VI: NULL Possible reasons: LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer. ========================= NOR-488: The non-existent GPIB interface.

  This looks really familiar.  I know I've seen this error.  I think there is a problem if you upgrade to the latest NOR-RIO, but you don't put at level LV FPGA 8.6.0 to 8.6.1, or something like that.  Would it be, kmoyna?

• empty fields of digital painting

  Hello

  I am creating a table digital indicator that contains blank fields for all the odd index. For example, (i = 1, 3, 5, etc...) Currently, I have a case structure to determine if the index is odd or even. For a same index, I pass the appropriate values in the function "insert table". For the odd index, I'm not sure what to plug into the 'new items/sub-table"Connector component to generate a value not intialized. Right now I'm wiring the constant infinite to use as an example. Ideally, I want the empty field. Thanks for the help!

  A digital cannot be empty.

  If it's just an indicator, you would simply substitute one string instead. It is possible to look the same. Here's a code option.

  

  Of course, if half of the elements are still the same (empty), it does provide all useful information to the operator. You can view both the items even without gaps. This saves you space in the public Service.

• Foglight alarms automatically erase themselves?

  Hello

  I'm new to Foglight and I have a general question.

  Foglight alarms disappear automatically themselves once a problem is solved?

  For example, if I get an alarm saying that the memory usage is high on a server and I'm going in and kill a process on this server to lower it, will get deleted automatically alarm or do I still go and delete it?

  Please let me know.

  Thank you

  Tony

  Multi-gravite rules generate alerts that will be automatically clear if the State goes away and the State of gravity goes back to normal. Also, the severities change automatically if an alarm has reached another gravity as an alarm becoming a fatal alarm.

  Simple rules such as the rules for the LogFilter agent will not automatically clear.

• CPU AND ram supermetric of use

  Hi all

  I use vcops 5.7

  I need the alarm when using cpu and ram are two < 40% for a week on a host system.

  I think a supermetric can help me, but I don' t know how.

  I think that something like this:

  If (< 40 CPU usage) AND (use of mem < 40) then supermetricvalue = 1

  can I define a KPI like this: If supermetricvalue = 1 to 840 collection and then alarm

  but I don't know if it is possible to define a supermetric like that.

  Any suggestion?

  Thank you

  IG

  better try this with an alert at several levels.

  Help:

  ------------

  Configuration of Mulitilevel alert rules

  You can configure alert rules complex that evaluate several conditions on related resources. For example, you can write an alert multi-level rule that generates an alert if the workload on a VM exceeds A to B cycles, health is less than C and the host CPU usage is greater than the dynamic threshold.

  Because the conditions of hard threshold in several levels alert rules generate no additional alerts, multilevel warning function reduces the number of alerts and allows you to that you will concentrate only on important alerts.

  Alert rules several levels do not have a specific alert type in vCenter Operations Manager user interface. The user interface displays an alert at several levels in the form of alerts KPI HT, but the alert description identifies the alert for Multi level rule. Triggers and the details of the rule appear in the pane of the reason on the Details of the alert page. Multi-level alerts are also visible as violation HT KP in mashup for the alert graphic and INFO displays the details of the rule.

  ------------

• Help of prepopulate adapter

  Hi all
  
  I use OIM 9.1.0.2 BP07 and I configured Table DB adapter. I want to pre-fill the user form fields but, all fields of the form are themselves filled with IOM instead of respective fields UserID. Here is the procedure I followed
  
  (1) on the console Design, development-> adapter tools factory-> adapter created prepopulate called DBPrepop with adapter Type pre-filled rule generator.
  
  The tasks of creating adapter 2) as user, fname lname for user_id, first_name last_name variables using the API tcStringUtilOperations with method and the input string holdData method is mapped to above variables.
  
  (3) on console Design, the form designer-> UD_MY_Users (form of Provisioning for my DB resource)-> create new Version-> prepopulate-> added 3 field user_id, first_name and last_name with the default rule, the adapter as DBPrepop, order as 1,2,3.
  
  (4) mapping as below
  
  variable-> Data Type-> map-> qualifying
  
  (a) USER_ID-> String-> user-> user connection definition
  
  first name b)-> String-> user-> name definition
  
  Last_name c)-> String-> user-> Lastname definition
  
  Please suggest me where I am wrong
  
  Kind regards
  Madhu

  method holdData seems a bad idea to me.

  -Create a variable in her pre-fill adapter
  -Directly use set adapter-> Variable return value
  -Your mappings looks very good.

• File or memory stream access via Flex

  Hi all

  I have create an application written in Flex for desktop sharing. For the desktop sharing, I have a component that generates a series of images of an area of the screen selected, where only modified screan areas will be transmitted. I would like to pass these images for flex/flash player to send eihter on P2P or a Flash Media Server to the customer. My question is:

  -Flex/Flash can attach to a memory stream object that is generated in a C++ component? A bridge exists here which is good enough?

  -If the bridge is not possible, Flex/Flash can read files from the hard drive? As far as I know a local sandbox approved is necessary. How is it like?

  Thanks in advance for your help,

  Marc

  Jin

  If you want a real desktop application, you can use Flex and compile it to a native client application using Air. If you want to read files the hard disk and upload them, you can do this with a browser app normal flex/Flash Player 10. There is no restriction on what you can open data files.

  The following flex application opens the images on the local disk and the poster, just to give you an idea of access to local files from a browser application.

  http://Gumbo.flashhub.net/pagedrop/ - source included

• Calling a parent of a child

  Hello
  I'm having a problem when trying to do a control that is a child of my application to communicate with him by calling one of its methods.
  
  I did a test environment, where the class of the main application [default classname] has an object of Web Service in it and a child control loaded dynamically with SWFLoader, [ClassName Tester] who wants to invoke the web service request from the parent. Reason 1 million I'm not explain here the call of Service Web MUST be done by the parent, so I obviously don't put in place another identical Web Service object in the child.
  I saw the example of SystemManager to let the parent classes to change the properties of the child, and I could use the same technique to change the properties of the parent child the same way, by converting this.root SystemManager (this.parentApplication throws an exception). Reference here.
  
  I understand that I can use SystemManager to change the properties of the parent, but how can I call methods? Is this the best way?
  Thanks in advance.

  I found the solution, and it works very well.
  Simply use events!

  I have defined classes of two events, one for applications for parent-child to parent-child's response :)
  The request class has a property of the sender which is the component that generated the request. It is used by the parent company to send the event to the answer to the correct caller.
  These two events have a data property that contains the parameters of the request and the response in the form of object data.

  I'll post an example as soon as I can

• Use of adapters IOM

  Hello
  
  What' is the main difference between rule generator and prepopulate adapter... talk in terms of practical scenarios

  You think you're clear with this thread. I hope you are!

  Thank you

  Sunny

• Customize the Group navigation

  11.1.2 JHeadstart using what is the best way to add a custom in a group navigation rule. In 10g, I used to store all the rules of navigation in my faces-config - custom.xml.
  
  With assistance from 11g and bounded workflows, I wish I could see rule generated within the adfc-config - leaderGroup . I can obviously drag a case on the diagram control flow, but what is the best way (IE what model) to be used to preserve this new rule?
  
  Thank you very much
  
  Brent Harlow

  Brent,

  You can create a custom template for groupAdfcConfig.vm and add your custom nav rule. Works but not the most elegant way.

  More elegant is to use the facilities to enter navigation rules in models that are then generated automatically in the adfc group configuration file. It's the same technique JHeadstart using "standard" rules of navigation For example, take a look at detailsLink.vm, it contains the following line:

  action = "${JHS.facesConfigGenerator.addNavigationCase (${JHS.current.group}, ${JHS.page.name}" ${JHS.current.group.name} Details ", ${JHS.current.pageComponent.detailsPage.name})} '"

  You can use a similar line in your custom template and call {JHS.facesConfigGenerator.addNavigationCase ()} to generate custom navigation rule:
  -first param: current group
  -second param: view source activity
  -param: name of the rule of flow of control, also returned by this method
  Fourth param: id to view destination

  Steven Davelaar,
  JHeadstart team.

• All ADF Faces components are suggested to have IDS

  JDeveloper 11 GR 1 (11.1.1.1.0) material emits warnings in the code editor if ADF Faces components have no ID is specified in the page. 'S done it by marking the corresponding component tags using orange lines below them. Why some components should have IDs if we must not reference them anywhere? (For example, most < af:group >, < af:separator >, input/output components with no dynamic link with other components and so on.) Is there a way to remove warnings "When using ADF Faces, it is suggested that all components have IDS" appear on the screen, because these fake warnings (which are everywhere) could prevent see me more most important possible?

  You can disable this message by using the tools-> preferences-> audit Faces-> profiles-> Rules-> ADF-> ID of component rules

• ADF business components: persistent negative IDs in the database

  Hello
  
  We use ADF 11 g with ADF BC as the model layer. All our database tables have a column ID, which is populated by a sequence and never shown to the user. ("IDs techniques".) In British Colombia ADF we have configured our entity objects with the attribute Id set as primary key. The type of the attribute is set to "oracle.jbo.domain.DBSequence". On the tab sequence, we set the name of the sequence in the sequence that corresponds to the table (we have a sequence for each table in the database).
  
  Our problem is the following. If we create a new record in our ADF Faces UI and a business on the database rule generates an error during validation after which correct us the error and resubmit the registration, a record with a negative identification gets in the base. If there was no error in business rule, we get an ID that corresponds to the 'nextval' in the sequence, as expected.
  
  Even though I know that ADF BC uses negative ID in the cache of objects entity for new records, I have no idea how and why these negative ID end up in the database. So far, they have been any problem in the database. But since this is unexpected behavior, I'm not entirely sure that the negative ID will not cause problems in the future. My questions:
  < ul > < li > is this design 'by' behavior or is it a bug? < /li >
  < li > if it is "by design": these are negative IDs guaranteed as being unique? < /li >
  < li > could it be caused by a configuration error in our model project? Where should I start looking for such a mistake? < /li >
  < li > could it be caused by a configuration error in our database? Where should we start to look for such a mistake? < /li >
  < li > would it be a bug in the ADF BC? < /li > < /ul >
  
  Best regards
  Bart kummel

  Bart,

  (1) it's by design
  (2) No.
  (3) No.
  (4) No.
  (5) no

  ;)

  Now for the explanation. Sequence name you set up is just for information purposes only - it is not actually cause ADF fill the value using the sequence. To do this, you must either write database triggers or you can use an extension framework class to have occur in the model layer - in my view, such an extension class is documented in the developer gude (search for DBsequence, I've not worn to hand at the moment). Negative numbers are only temporary placeholders.

  John