Similar Questions

• Why a few recorded tracks "empty" when I opened the Garageband projects on another machine?

  Hey

  I have just updated my laptop to be able to run the same version of GarageBand on my iMac and MacBook (OS X El Capitan and GarageBand v.6.0.5) and work on projects of GB on what that machine is available.

  I just tried to open a few GB on my MacBook projects (both were created on my iMac) and the recorded vocal tracks are "empty", as below.  The track from the top (purple) is any wav. file and the blue trace below is the vocal track, although it says "file not found".

  

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.  Or I make a stupid mistake?  It's really quite likely, but any help is very welcome!

  Thank you

  Rich

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.

  The problem could be the DropBox synchronization. DropBox is ideal for simple documents, but your GarageBand projects are files with databases and multimedia files inside. Synchronization can break the connection between the media files and internal databases.

  If you want to transfer projects with Dropbox, it is safest to compress the projects and move to archive compressed to dropbox.

  But see, if the media are still inside the Garageband project. Perhaps the download was not complete.

  • CTRL-click the .band file and select "Show Package Contents".
  • In the Finder window that opens, select the "Media" folder
  • Copy the audio files in this folder to a folder on your desktop.
  • Try to identify the missing audio file.  If you can find it, drag it to the track where it is absent.

• Re: specification for parameters of the project and the final delivery of the animations for broadcast HD

  Hi all

  I just finished reading the book of techniques of studio by mark christiansen and I have I have some doubts, maybe, someone working on similar projects can help out me, I hope!

  I live in a PAL country and I especially design and animate the graphics in AE with layers of shape, the illustrator files and psd files. I can work in a proyect for broadcast HD tv and some questions and insecurities had crawled in. I would describe who will be I guess than the workflow:

  1 - setting up the project in AE:

  

  of course, the working color space should be consistent between applications. Linearize is important, but I Don t well grasp the concept.

  (2) my master composition:

  

  Here, the choice of the frame rate should be 25/50 according to the... ? is just a choice if you work with live images of the hd cameras? apply to animations, graphics?

  And last question, which would be the preferred delivery format and the encoding of the file? I know that there is a wide choice, but if you have a set that s works for you and your customers then i´ll be useful.

  Also. If you have an article, you can recommend where there is an explanation very clear be appreciatted, it seems (to me) the deeper you digg I get more confused.

  Thanks in advance!

  You should check with the diffuser. Either they publicly publish their requirements or that they are in a contract. There is not one size fits all here. The best option for the broadcast work is to make a copy almost without loss or loss of your job as a DI (digital intermediate) and then compress the project specifications accurate diffuser using Adobe Media Encoder or another application specifically designed for video compression for delivery. The only time you ever look like an amateur is when you do not ask the specifications. I regularly get the same images different distributors in 6 different formats.

• Graphics compressed

  Hi all
  I designed a chart and imported it to Captivate, but when I published, the image is compressed that have an impact on the graphic quality. I deselected the compression advanced project and Tablet compiled SWF file under preferences but always the same result.
  Can anyone help?
  Thank you
  JT

  Alternatively, set the quality of the slide from the slide containing the graphic on 'high' (click right slide to slide properties)

  Webbo

• Problem using Vista Home Premium disk cloning

  My laptop hard drive Asus F3F is almost full, even after compression, I bought a 500 GB WD Advanced format drive and a drive enclosure that will house him while I try to clone the drive in it. I loaded EasUs Todo backup (free) to help with cloning. When you connect the new drive appears in Device Manager under disk drives and computer under storage management, but it does NOT appear in my computer as a disk in the backup software so I am unable to make the clone. Can anyone help? (The reason for his approach is because that software op is the one that came with the laptop)

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that you are facing the issue with disk cloning. We'll try to get this fixed number.

  You can try the suggestions in the link and check if it helps:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  If the problem persists while you can display the query in the TechNet forum.
  TechNet Forums - http://social.technet.microsoft.com/Forums/en/categories/

  If you need further assistance, please answer and we will be happy to help you.

• JAR JSON file

  Hello

  I would like to know how to create a. Http://www.json.org/java/org.json.me.zip JAR file. I want to be able to add as a JAR file instead of directly add the addition of all classes to the project. Could someone help me.

  I tried various methods without success. The failure of preverify kept.

  Make sure that your projects are using similar levels of compliance. Also try cleaning and reconstruction of your project. The project is now a library of BlackBerry, try adding just a reference to the library project in the main project rather than directly adding the JAR.

  Therefore, when you compress your project, your library project is automatically added to the Simulator. When you deploy on a real device, it becomes a different story. If you deploy Live, you must update your JAD file to include references to the file library cod.

  You can use the UpdateJad executable in the bin folder of one of your packs of component to do this. Just do:

  updatejad Main.cod Library.cod
  

  And it will do the rest for you (even create a backup of the old JAD). You must be sure to give the full path to each cod or run updatejad on a folder that contains all the necessary files to COD.

  If you are using Desktop Manager, I believe that dependencies are automatically added to the ALX and simply copy the library cod file in (not 100% on this property.

  Lengthy post but hopefully it helps others.

• Flash vs animate using Animate/encode for the class

  Hello!

  I take Adobe animate as a class for graduate studies. I use the latest version of Animate, however, the class uses the book of Flash CC 2013 for the lessons. In Lesson 7 I have Media Encoder allows you to convert video files for the project Animate lesson. The book ask the converted videos is no longer available due to updates. I am just learning all this so I don't know what is the equivalent of what I need. The original file format is H.264 preset is Source of Match - broadband and the lesson asks me to convert it to the Format F4V and Preset Web - 320 x 240, 4 x 3, project Framerate, 500 Kbps. help, please!

  Support for FLV and it seems F4V, has been abandoned for a long time. You may need to check with your teacher if you can say MP4/H.264 to these same settings. Or, if you look at the menu CC, applications tab, you can set up previous versions of the applications, then use the version from 2013. Don't know if this is old enough, you may need to install the version of CS6.

• Film plays in sync on video players ~ movie plays out of sync in the first

  I have five movies HDV 60 min recording on a Canon HV40.

  Using Windows 7 Pro 64 bit, Adobe Premiere Pro CS6 and made a capture in the usual way on these five films.

  After the capture, I began the usual changes but I found that 3 movie audio was seriously out of sync with the voice of the guest speaker.

  I took the movies on another computer (a HP z800 and HP z230) and all the films played perfect except Film 3.

  3 movie plays perfectly in WMP and Vimeo.

  I chose to make an another upload/capture - renamed Film 3 and here I still encountered the same problem.

  All movies in this series of conference were shot the same day, the same device. Film / film out film / film out - nothing unusual.

  Properties and all the films in this series are identical.

  Film 3

  Path: D:\z800 migration\641-mch20-2016-wparks - 3of4.mpeg

  Type: MPEG Movie
  File size: 10.0 GB
  Image size: 1440 x 1080
  Frame rate: 29.97
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:52:42:21
  Format of the pixels: 1.3333

  Movie 4

  Path: D:\z800 migration\642-mch20-2016-wparks - 4of4.mpeg
  Type: MPEG Movie
  File size: 4.0 GB
  Image size: 1440 x 1080
  Frame rate: 29.97
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:21:06:18
  Format of the pixels: 1.3333

  Today, I downloaded for the fourth time on another computer Film 3. The movie plays perfectly synchronized on any video player however, first, the material is out of sync.

  Let me know what error I've created.

  Thank you

  Yes capture with hdv split with scene detection on

• File synchronization problems

  I have a file that I need to download to the cloud, it's about 10 GB in size... the problem is, I leave it in the folder and when I come back, he said that it was "impossible to synchronize the file.

  The file is an extension ".mov" quicktime prores, there is nothing unusual in the name of the file that would create a conflict.

  I tested with a small file and everything was ok.

  I also made sure subject the conditions necessary for clouds desktop synchronization files are in place.

  Not a lot of information about this lie.

  Thanks for any help.

  The file that I tried to download was 10.13 GB, and after a conversation with technical support, this is the only apparent solution:

  

  This is not the end of the world, even if it is unfortunate that I have to compress a project twice instead of once to send it...

• The P6 capacity planning

  all. Thank you.

  Notice of capacity planning draws a number of recordsets (projects in a portfolio, project types, roles in a portfolio, the role data spread and role schedules) that are used to display the planning grid capacity, but according to the user's selection, that it applies to a logic of treatment (i.e. adding by chronology) before the user discover interface is rendered.

  I played around with this a bit and here are a couple of SQL which may help you point a response (just a guess on my part, I hope it will tell you in the right direction).
  On a side note, I think that using the web services of P6 SpreadService.ReadProjectRoleSpread would be easier and less messy!

  I think you need some SQL queries to get recordsets which are necessary for the capacity view planning information use.

  1. the projects of a given portfolio
  2. the roles on projects within a given portfolio
  3. divide the data for each project by role
  4 data on the calendar for each role (play time more so I don't look in this dimension)

  Projects within a given portfolio:

  DECLARE @PortfolioName varchar (255)
  SET @PortfolioName = ' key projects plus $500 K.

  SELECT pw. WBS_ID, pc. PROJ_ID, pw. WBS_NAME, pc. PROJ_CATG_ID, pv. PROJ_CATG_NAME
  PCATVAL PV
  INNER JOIN PROJPCAT ON a pc. PROJ_CATG_ID = pv. PROJ_CATG_ID
  INNER JOIN PCATTYPE pt ON pt. PROJ_CATG_TYPE_ID = pc. PROJ_CATG_TYPE_ID
  INNER JOIN PROJWBS pw pw of ONE. PROJ_ID = pc. PROJ_ID
  INNER JOIN PRPFOLIO pr WE PR. WBS_ID = pw. WBS_ID
  INNER JOIN PFOLIO ON PF pf. PFOLIO_ID is pr. PFOLIO_ID
  WHERE pt. PROJ_CATG_TYPE = 'Type of project.
  AND PF. PFOLIO_NAME = @PortfolioName
  ORDER BY pv. PROJ_CATG_NAME, pw. WBS_NAME

  Roles of the projects within a given portfolio

  DECLARE @PortfolioName varchar (255)
  SET @PortfolioName = ' key projects plus $500 K.

  SELECT sr. SUMTRSRC_ID, sr. PROJ_ID, sr. WBS_ID, sr. ROLE_ID, pw. WBS_NAME, rs. ROLE NAME
  OF SUMTRSRC sr
  INNER JOIN projwbs pw WE sr. PROJ_ID = pw. PROJ_ID AND pw. PROJ_NODE_FLAG = 'Y '.
  INNER JOIN PRPFOLIO pr WE PR. WBS_ID = pw. WBS_ID
  INNER JOIN PFOLIO ON PF pf. PFOLIO_ID is pr. PFOLIO_ID
  LEFT OUTER JOIN PROJECT pj IT sr. PROJ_ID = pj. PROJ_ID
  Pw1 LEFT OUTER JOIN PROJWBS ON sr.wbs_id = pw1. WBS_ID
  JOIN EXTERNAL LEFT rs ROLES WE sr. ROLE_ID = rs. ROLE_ID
  WHERE sr. SPREAD_TYPE IS NULL
  AND PF. PFOLIO_NAME = @PortfolioName
  AND sr. RSRC_ID IS NULL
  AND pw1. PROJ_NODE_FLAG = 'Y '.
  ORDER BY pw. WBS_NAME

  Data propagation for each project by role

  DECLARE @PortfolioName varchar (255)
  SET @PortfolioName = ' key projects plus $500 K.

  SELECT sr. SUMTRSRC_ID, sr. PROJ_ID, sr. WBS_ID, sr. ROLE_ID, sr. Start_date, sr. END_DATE,
  SR. SPREAD_TYPE, sr. STAFFED_TOTAL_QTY, sr. UNSTAFFED_TOTAL_QTY, sr. STAFFED_REMAIN_QTY, sr. UNSTAFFED_REMAIN_QTY
  OF SUMTRSRC sr
  INNER JOIN PRPFOLIO pr WE PR. WBS_ID = sr. WBS_ID
  INNER JOIN PFOLIO ON PF pf. PFOLIO_ID is pr. PFOLIO_ID
  WHERE sr. SPREAD_TYPE <> 'FinancialPeriod '.
  AND PF. PFOLIO_NAME = @PortfolioName
  AND sr. SPREAD_TYPE IS NOT NULL
  AND sr. RSRC_ID IS NULL
  AND sr. PROJ_ID IS NOT NULL

  Still, I didn't spend at any time to check to see if I had all the records of right and I really think that the using the SpreadService.ReadProjectRoleSpread would be more approach better to get the information you want but it was fun looking for a solution.

  Gene

• Discussions about hard drive setup

  Hello everyone, and Merry Christmas. I use the suite CS6 Adobe (Photoshop, Illustrator, first, After Effects and hearing), Avid Media Composer 6 and Davinci resolve 9 Lite on my system. I read different configuration of hard disk including those who posted ham. Until now, I was using just a hard disk for all. I know it's bad. I never had the money. But now I do. Here's how I think it should be like and it is very similar to the mentioned by Ham 3 disk configuration.

  500GB 7200 RPM for C: (operating system, programs, swap files, various stuff like documents, etc.)

  1 TB 7200 RPM for D: (Media files and projects)

  500 GB 7200 RPM for E: (exports, previews and Cache)

  I can't afford a raid drive because I want a Raid 5 and it is clearly out of my budget. I'll get one as soon as I can. Now I have a desktop computer. I thought I had the media player to be outside with a good pregnant with a heat sink and a fan. I have an eSata, USB 3.0 and USB 2.0 port. I will continue the other drives internally and keep the drive to external media due to heat problems. Is this the right way or I should have all the disks internally? I have a good and a ventilated housing. Its the HAF 922 with coolant (Corsair H60) for the CPU. Please help me. You guys thanking in advance.

  I would use for an external eSATA, since it the fastest connection available on your desktop, but an alternative would be to use in-house and save on housing, with no performance penalty. The willing HAF 922 of refrigerating power enough to handle the extra drive is internal.

• video looks like much until the converted to swf. unwanted leaves on slides

  I am using Captivate 5 in TCS3 on XP.

  This is my first attempt of making videos.  I'm pretty happy with the final result, except that there are shadows of widgets on slides, where they should not view.  For example, there is a slight outline of the text boxes and drop-down lists on slides that do not have them.

  I suspect that there is some sort of adjustment must be defined when I generate the .swf, but I don't know what it is.

  Thanks in advance for the help.

  Something I found also can cause this 'ghost' of objects on slides following is compression in project settings: size SWF and quality.

  So I try to disable all the compression options and then publish to see if she gets rid of the afterglow.  If Yes, I have on them again one at a time, editing in between to see which option brings back them.

• First Pro CS5 tears Android HTC G2 3gp video

  My android HTC G2 HD video plays fine in Windows media player, windows and Mac OSX quick time player vlc player.

  Primer Pro CS5 rips the video after import.

  Priemer reports video as:

  Type: MPEG Movie
  File size: 4. 5 MB
  Image size: 720 x 480
  Sampling: 32
  Frame rate: 28.81
  Audio Format: 8000 Hz - compressed - Mono
  Project Audio Format: 8000 Hz - 32 bit floating point - Mono
  Total duration: 00; 00; 12; 13
  Average flow: 367 KB/second
  Format of the pixels: 0.9091

  Windows uses the H.264/MPEG-4 AVC codec, but points out the cadence as 29.412 and duration as 12.460 use Gspot.

  If you want to take a look, you can download the file here: http://www.circlesoft.com/images/VID_20110311_075425.3gp

  Any suggestions?

  The value of reading full resolution; Right click on the image in the monitor of the program for the menu option.

• Images of H264 is pixellisant during playback

  Hello

  Im trying to change some sequences .mov H264 premioere CS5 but first reading is always very pixelated. I had to convert the images using mpeg stream so the images would be to work with my pc but playback in Quicktime format is fine. Also, when I export images playback is fine. I can't change the images because I cannot makeout which continues. If I click to heritage in first on the clips im having problems with I get

  Path: T:\viddy\New folder\493_0560_01.mov
  Type: MPEG Movie
  File size: 54.5 MB
  Image size: 1280 x 720
  Sampling: 32
  Frame rate: 25.00
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:00:17:19
  Average: 3.1 MB/second
  Pixel format: 1.0

  in the film inspector I get this

  

  As you can see the first think itss MPEG. Could be the problem? How can I fix it?

  This is what looks like the wrong sequence

  

  I have Windows 7, first CS5 5.0.2 Geforce 8400GS, Quicktime 6 GB RAM, AMD Quad 7.6.8.

  Thanks for any help

  Right-click on the window of your monitor and check the resolution of reading is set to full.

• AVI output

  I can't find good settings output an uncompressed AVI file.  I use CS4, Microsoft AVI, codec and I tried all elongation and none work properly - the width is compressed. I'm afraid that my problem could be caused by the AVCHD format.

  Type: MPEG Movie (AVCHD)
  File size: 1.3 GB
  Image size: 1440 x 1080
  Sampling: 32
  Frame rate: 29.97
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total duration: 00; 31; 18; 26
  Average speed: 737 KB/second
  Format of the pixels: 1.3333

  I have read several posts on the forum on this topic and see that others have the same problem.  I used the first since 1998 and never had any problems AVI file show until I started working with the Media Encoder.

  My widescreen WMV files are superb.  I wish I could make my AVI files look like.

  Hello

  I'd say you need to set it up as follows:

  Width: 1920

  height: 1080

  pixel format: square pixel (1:1)

  This should give you a picture of pixel square perfect hi-def.

  You realize an AVI HD uncompressed one minute 31 program will be right huuuuuge?

  test on 10 sec or so first and see what your picture looks like, and what is the size of the file. You can always work on the size of the final file from there.