File synchronization problems

I have a file that I need to download to the cloud, it's about 10 GB in size... the problem is, I leave it in the folder and when I come back, he said that it was "impossible to synchronize the file.

The file is an extension ".mov" quicktime prores, there is nothing unusual in the name of the file that would create a conflict.

I tested with a small file and everything was ok.

I also made sure subject the conditions necessary for clouds desktop synchronization files are in place.

Not a lot of information about this lie.

Thanks for any help.

The file that I tried to download was 10.13 GB, and after a conversation with technical support, this is the only apparent solution:

This is not the end of the world, even if it is unfortunate that I have to compress a project twice instead of once to send it...

Tags: Adobe

Similar Questions

  • log files synchronization problem

    Oracle 11.2.0.1
    IBM AIX - 6.1 and 7 power machine with 64 GB of memory.
    32 processors logical and 8 more physical...

    Here is the excerpt of 20 minutes AWR report, DB time is 132,95 (mins).
    Top 5 Timed Foreground Events
    
    
    Event                  Waits               Time(s)      Avg wait (ms)     % DB time              Wait Class 
    log file sync       1,769,997              3,939                    2            52.38                   Commit 
    Machine is not exchanging the process... From what I understand, the log file parallel write should offset a significant part of the time for synchronization of the log file.

    Currently the log file sync take a total of 3 939 seconds while the log file parallel write takes a total of seconds 299.


    I went thro different blogs on this event, checked the CPU use/machine Swap/memeory etc... All thoughts to settle this one because I'm out of ideas.


    Thanks for your time...

    It might be useful to define the 'batch validation' on. If you accept the possible risk of course...

  • Problems with file synchronization in CC teams on multiple devices.

    I work in CC Adobe teams with another Member of the team. Between us two, we use several devices to access our files. Part of my responsibilities included managing our labelling of products. We are governed by the USDA, Oregon Tilth and Demeter for our content of labeling. It is therefore essential that I have total control of our content to the label and you can trust that all our files synchronize across all of our devices.

    Recently, we completely reworked a line of products complete, aprox. 190 different references and it seems that changes I made on my desktop system at home or my partner made remotely are not always synchronized. I can't reproduce the behavior, and I don't know when it happened originally, but something is definitely happening. A print out of the main file has been updated and soundproof in October. The file has been reprinted again around November 2, and many changes have disappeared. I don't make sense to me because the printing of the same device (a computer desk in our manufacturing plant). It almost seems that synchronization has run and writes files with older versions, instead of update changes.

    In addition, several times I opened the files to discover "copies in conflict" of the file to both my account and my teammates. I usually delete these files as seems to be the same as the ' original '.

    I am running Yosemite on the desktop that I am working on, I have an iPhone 6 and iPad with current operating systems and my partner works in Windows on his desktop and laptops and turn off her iPhone.

    I would advice you Contact Customer Care as some troubleshooting may be required through remote session.

  • Creative cloud synchronization problems

    I had problems to sync files with creative cloud for almost a month. Including an update would fix it, but never came. I find the number of threads and tried a lot of things, but I've not met a challenge again.

    Basically, it just happens on "Synchronization", and it's file 1 of 239486 or a similar huge number and tells me that it will be like 1310 hours or something.

    I could really use this sync work, if someone has suggestions.

    Screen Shot 2016-08-27 at 2.23.20 PM.png

    @P4ugusto - is not clear how this is the CC to https://assets.adobe.comsite and file synchronization. Applications that are part of your Adobe Creative Cloud membership should show as installed in the desktop creative cloud application. For example, I have 1 single application installed by the screenshot.

    Please explain the problem you are having with more details.

  • How to enable file synchronization?

    How can I enable file synchronization in the cc again?

    @

    Links for synchronization of files that can help... all the links I have, since I don't know your specific problem

    -https://forums.adobe.com/community/creative_cloud/host_sync

    -http://helpx.adobe.com/creative-cloud/help/sync-settings.html

    -http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html

    -Size limits https://forums.adobe.com/thread/1488242

    -sync and send a link http://forums.adobe.com/thread/1427516?tstart=0

    -Record ghost https://forums.adobe.com/thread/1490445 problem

    -an overview of https://assets.adobe.com/files assets

    -File sharing https://forums.adobe.com/thread/1838790

  • File synchronization WITHOUT deleting everything

    I'm on a project where I spend using my personal computer and a (public) system of the company. I wish I could sign in and out of my CC account on the public computer and delete my files, when I connect security purposes. However, if I just disconnect and then delete the files or break synchronization and then disconnect and remove, it creates a problem. The problem is that when I connect to the public computer, it recognizes that I have deleted files and removes them from my CC account, so I have to restore the files from the archive. Is there a better way? If this isn't the case, I will stop just by using file synchronization.

    Got it to work. When I left the public computer I have disabled synchronization of files,

    disconnected, then deleted the folder that CC files were. So when I

    is back, I created a new folder with a different name, signed at, move it

    CC the folder to the new folder and active sync. All my files were

    downloaded correctly in a few minutes.

  • Icons of missing file synchronization

    When I first installed creative cloud and use file synchronization, I got a green check mark next to my files or blue arrows when they were downloading.

    Now I have nothing, but the files still sync. The files just don't have icons beside them.

    I am running the latest version of the desktop application (2.2.0.129) and Mac OS X 10.11.

    Hi Brad,

    You are at the forefront, on OS X 10.11 already!

    We are aware of the problems with the icons of overlay on OS X 10.11 in version 2.2 of the creative Cloud Desktop application. Need to fix it in the next version of the desktop creative cloud app soon.

    Ben

  • Fonts and creative Cloud files sync problem

    Hello

    I'm working on two diffents mac at work and one at home - with a subscription to creative cloud. On both computers, files and fonts do not connected/sync. Annyway, I can't use the fonts on one of the mashines. The CC app is open and therefor should work with for example the fonts I have already synced on my computer. Apparently I can solve this problem in quiting the creative cloud and restart, but I hope that this could be solved somehow.

    Someone has an idea or a way forward?

    Jørgen

    I just deleted the "com.adobe.accmac.plist" file and then restarted Adobe Cloud. Now my fonts and files synchronize again.

  • iPod connection and synchronization problems classic160GB

    I have a well taken in charge iPod classic 160GB. Worked perfectly until...

    Since the upgrade to the latest OS (iMac), I've been prone to random error when updating of my music. Essentially (1) the device is still connected and there is no apparent way to perform a good ejection process (2) and synchronization fails after many hours and don't care only about 100 songs.

    Thus, it seems that the iPod is ok mechanically. I have reset the device and formatted the HARD drive. This allowed then the synchronization process works correctly. Yesterday I downloaded the songs on the iTunes store and wanted on the iPod - same problems error has occurred.

    Would it not make sense to go back to an earlier version of the operating system? and iTunes? (same iTunes appears unstable now...)

    I see that this timing issue is quite common with this unit holders and it seems to be common, because support was arrested for this camera - I'd be cynical? Why isn't Apple in the face of what it comes to very bad reputation management - total contempt for Affairs of its user base?

    I always use what is apparently a good piece of hardware, but I'm extremely frustrated as a user. Any body found the corrective action? If so, what is it?

    LAST: I left Apple and bought a Sony HD camera. Why? as a result of these frustrations. I'm now evaluate whether to consider other Apple devices that are close to replacement (viz, Ipad, MacBook Pro (17 "), iMAc) with non-Apple devices. This is how frustrated and I'm in a bad mood.

    Please, if you know a solution, I am very willing to try that.

    Problems with synchronization is often caused by a hard drive which becomes unreliable.  Hard drives are mechanical and ends by fail, computers and iPods.  I have much older iPods (4th gen, 3rd generation and iPod mini) that are more than 10 years at this point.  They still work perfectly fine with the latest version of OS X and iTunes.  I replaced the fragile hard drives in three of these iPods with Compact Flash card or an SD card on an adapter.  For the 5th generation and later iPods, you can look here for more information

    https://www.iFlash.xyz/

    I see that this synchronization problem is quite common with this unit-holders...

    It's not just 'common good' considering there are millions of iPods (with storage on hard disk) still serving there.  However, if you see more cases of these days, the reason is obvious.  They age, on average.  The iPod classic model was released back in 2007.  Old things tend to start fault for various reasons, including defective hard drive.

  • Also cannot open file Association problem: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe

    I have a program with: file Association problems: also failed to open: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe.

    I put security update, Internet XP but still the problem!

    Hi StanleyMcDowell,
     
    This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
     

    Follow the steps listed in the article below and check if the problem is resolved.

    Cannot find the Rundll32.exe file when you open Control Panel

  • Windows® XP file Association problems? Copyright 2003 - Doug Knox? his files work?

    Windows® XP file Association problems? Copyright 2003 - Doug Knox? his files work?

    It is wrong to go all that is your problem.

    I have instructions to run the Doug Knox fix as a copy/paste of my notes, I'll never have to type it once again, which means that (at least for the EXE usual file association problem), I like to use, but we don't know what your question is.  In fact, the majority of the stuff I answer here is just a copy and paste, I have fixed some things so many times...

    Here's what I have copy and paste about afflicted EXE file associations:

    Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.

    If you don't have it you, something done for you - most likely malware.

    Go to this site WWW by Doug Knox:

    http://www.dougknox.com/

    On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

    Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

    Run the following scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

  • Weird file Association problem

    I have a new and unusual file association problem.  At the start, whenever the PC is turned on, this file association window opens:

    Here's the weird part: "Remy" is the name of the main user of this computer.

    In recent days, before that the problem began, I had worked on some of fixing nagging problems that could be fixed now (a little too soon to be sure).  Don't know if there is a link between what I've done and this file association problem...  But here's what I did:

    1 an error message for lack of file Association for an external hard drive has been corrected by the associations of fixation to the drive, folder and file from this page (see at the bottom of the box): http://www.winhelponline.com/blog/file-asso-fixes-for-windows-7/

    This problem is now fixed.
     
    2 event ID 2 errors were corrected following the advice on this page:

    http://social.technet.Microsoft.com/forums/Windows/en-us/1ad12734-3cd2-4733-936D-9c4071ecdb63/event-ID-2-error-homegorup-log-has-failed-to-start?Forum=w7itproperf

    Specifically, these instructions

    In another forum "richardvetman" has this solution. I have not checked yet, but that's what he said:

    'Hi.

    The circular kernel context logger takes frequent pictures of the system in a file of 100 MB of RAM (not on the disc). It is needed.

    To fix the error "not start", look for the next file in the %windir%\panther\ folder:

    Setup.ETL

    and rename it to

    Setup.Old

    He can stay in the \panther\ folder.

    Reboot and everything is done!

    RichardVetMan ".

    http://www.SevenForums.com/general-discussion/2189-event-viewer-errors.html#post391234

    So far, no more error Event ID 2, even if it is a little early to be sure...

    3 event ID 27, property of the Outlook calendar folder is missing, were corrected advice following Diane Poremsky pointing to this MS hotfix:

    http://support.Microsoft.com/kb/2849973

    This problem is now gone.

    Would be very happy with your suggestions on how to get rid of the annoying file association warning when the PC is turned on.

    JF

    Looks like something is running at startup, which is causing your problem. Take a look at this app and I don't know that he will jump on you.

    Autoruns from Sysinternals

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    Note, right click > run as administrator

    I hope this helps.

  • Damaged file - swatch problem?

    I'm working on a map of board game showing aerial view of a city. For various reasons, I use different shades for each corner of the roof of the building - the same model basis, but dark for opposite the sun roofs, lighter for those facing towards the Sun, etc. (Yes, I can do something like this using a single nuance and superimposing different levels of gray on top fill) (by a multiplication or Darken blend mode but IMO, CMYK blending modes doesn't look as good the RGB modes made in Gimp, it's what I use).

    That's why, when I draw a building, I put down the building "skeleton" and apply different shades to each side of the roof, then I rotate the building to its correct orientation.

    Unfortunately, even if Illustrator saves these files very well, they open not so well. I get errors like this:

    Capture.PNG

    Where "light textured Tannish brick" (No 2) is one of my color chart.

    I used the advice on this web page (https://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file) to retrieve the file, but the problem continues to be and I can't continue to work in this way.

    It seems that when I apply a shade and then turn it in the context of the rotation of its building in position, Illustrator creates a new shade and adds it to the Swatch Group. Because I re - uses the same set of basic color chart, Illustrator keeps renaming with < name of Swatch > #, where # is 2, 3, 4, etc. Apparently it finally becomes a problem, perhaps?

    Any help or advice there? I put a lot of time in this process, and I would not give up because Illustrator can't handle a lot of nuances rotated.

    I use Illustrator 18.0, I think. This is normal - I don't like being on the cutting edge of improvements to Illustrator. However, if the problem has been resolved in one of the latest releases, it would be worth grin me and update.

    Thank you

    Tom

    Tom,

    Being a recurring/coherent file corruption problem, I think this is one for our friends at Adobe staff in the design review team.

    I just tried to draw attention to our product support Manager.

  • Could not complete your request because of a TIFF file analysis problem.

    I use Photoshop 2015.1.2 Relese on a Mac El Capitan 10.11.3 version

    I have serval Tiffs which I thought were corrupt, since I can't open them in Photoshop without the error "Could not complete your request because of a TIFF file analysis problem."

    But I can open them in the preview. Any suggestions?

    We have the same problem: compressed, but it lacks the StripByteCounts area (required for TIFF).

    Some TIFF decoders can read the file, but most will not.

    Overview of Apple gets most of this file, but the top of the image looks like it may be damaged.

  • Does space empty between the video clips a synchronization problem in first?

    In the past, when I wanted a second or two of black space between video clips, I just leave the empty space, which fell to black on each side of the gap.

    Can only cause audio/video sync issues? Can I actually save some black frames and fill these gaps?

    I just loaded a video on Youtube, and it gives me an error message I could have synchronization problems.

    Thank you

    Leonardo

    From my experience, empty spaces will not cause any problem whatsoever.  Done it for more than a decade in every version of Premiere Pro.

Maybe you are looking for