Compressed file contains the empty fonts folder

Similar Questions

• can I delete the files from the backup.backupb folder?

  I'm trying to restore a backup time machine on a hard drive that is smaller than the backup. It is safe for me to delete unnecessary files from the backup.backupb folder?

  Actually, no. Deleting files directly from the sparebundle will lead to file corruption.

  Ref: Pondini - Time Machine troubleshooting

• Cannot open files in the Windows.old folder.

  Original title: I can't OPEN THE FILES IN THE C:\WINDOWS FOLDER. OLD
   
  I FORMATTED MY LAPTOP FOR 3 OR FOR TIME. BUT NOW I CAN'T OPEN ANY GAMES WHO ARE IN THE LOCATION C:\WINDOWS. OLD\ (PROGRAM FILES (x 86) \WILDGAMES...) THERE ARE FILES LIKE WINDOWS. OLD.000, WINDOWS. Old.001, etc. SAMSUNG RECOVERY SOLUTION 5 ALSO NOT WOKING. HOW CAN I GET IT ALL.

  ONE OF HER SHOWS...

  Signature of the problem:
  Problem event name: APPCRASH
  Name of the application: DriveGreen1 - WT.exe
  Application version: 2.2.0.82
  Application timestamp: 4a64d47f
  Fault Module name: DriveGreen1 - WT.exe
  Fault Module Version: 2.2.0.82
  Timestamp of Module error: 4a64d47f
  Exception code: c0000005
  Exception offset: 0002f4a9
  OS version: 6.1.7601.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 33e3
  More information 2: 33e3088220c0b0cc79609643cfeaa4f6
  Additional information 3: cb01
  Additional information 4: cb01097c2b9f695aa9f8d8260260a959

  Hello

  Thanks for your posting in Microsoft Community

  You have formatted your partition of hole or C only
  You had installed multiple operating systems in Multiple drive.
  This file has not been completely formatted, that's why you found the old folder windows, you will need to format whole drive all the
  To move your personal files from the previous installation of Windows 7 folders, follow these steps:

  1. Locate the Windows.old folder, and open the following folder:
     Users\ directoryUserName
  2. Right-click the Documents folder and then click Rename. Rename the My Documents folder.
  3. Right click on the music folder and then click Rename. Rename the My Music folder.
  4. Right-click the images folder and then click Rename. Rename the folder my pictures.
  5. Press in and hold the CTRL key and click to select all the files in the user folder. Then, press CTRL + X to move the items in the users folder to the Clipboard in Windows 7.
  6. Click Start

     and then click the user name in the upper right of the start menu.

  7. Click on paste.

  More information visit the site

  http://support.Microsoft.com/kb/932912

• each time when opening AI CC 2015 I get the message "file contains the update of legacy text.

  Everytime I open AI CC 2015 "this file contains the text that was created in an earlier version of Illustrator.  The legacy text must be updated before you can change it."  Three times, but I'm just launch the program and not to open a file.

  Thank you

  cvcomputers,

  You can try to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

  The cleaning tool works for all versions of CS3 on (you can see the top of the page).

  Here are the instructions for use, including individual applications:

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• How to remove unwanted files from the local root folder of the site?

  Hello

  I work with Dreamweaver CS4 on a Windows PC. I have finished my site but I have a lot of files in my local root folder that I don't want to upload to the server. These unwanted files are for most of the photos that I should not be used in my site. I do not understand how to download the site on the server using ftp and remote folder in Dreamweaver. I suppose that if I move the page html files to the remote folder that my photos will not be associated with these html files automatically. I used a Dreamweaver template during the construction of the site. I wish I had a folder with only the necessary files for the site (all html pages and a folder of images) to upload to the server. Is there an easy way to move all my pages and images associated with a folder or remove all unwanted files in the local root folder? As I see it now, I'll have to go through all my pages and write down each title of the photo and then go back and delete each unwanted file. This seems a lot of your time, so I thought that there must be an easier way, I hope.

  Any help or ideas will be of course very appreciated, thanks, dluthier

  I guess you mean 'work' files, not the images that you use in your Web site.

  If they are not related to all pages of your site, you are free to move by using your computer's file management tools. I can give you specific instructions, if you wish, but the short of it is that you do not keep them in the folder root of your site at all.

  In my way of working, I have a folder for each client that includes:

  • The correspondence of this client folder
  • Folder to 'Work'... the PNG images, etc., or of the images from the client
  • Record the site root

  When I get e-mail, I save the message in the appropriate folder of correspondence, I save the images etc in the folder of 'Work' to the customer and I only save images and other who have already been optimized in the Site folder, keep it as intact as possible.

  Even if the general warning must always use the files Panel to move files around, that applies to files which are linked and form part of the structure of your Site. Moving your files 'work' outside of the structure can be carried out safely in windows explore your PC.

  That said, if you need to download and there are files you want to download, or to move, you can 'hide' the in the files Panel by right-clicking on the file name and choosing 'Cloaking '.... "in the context menu that appears.

  To the point that the image files that are downloaded to the remote site will not 'automatically' be associated with your html files. That is right. Unless you have configured explicitly links or associations between files, images will not associate themselves!

  On the subject of 'automatic' way to do this, you can make a link to check on all of your local site. Window > results > Link Checker will bring up the appropriate window, which will give you the choice: broken links, external links and orphan files (this is the one you want). Use the green triangle tower at the left end of the Link Checker to set your auditor... Current Local Document or a set current site.

  If you want to make a checklist to ensure that you move them all, you can save the report by clicking on the small icon "Floppy" under the Green turn the triangle. Who will be on a file text and make up a dialog that you save the report, which will show the broken links, external links and orphaned files. After you move the files to your heart's content, rerun the link check and confirm that you moved the files you want to move. Make sure that you DON'T move files consciously... do not move the .htaccess files or .cgi files, etc.

  Who will save you from actually having to 'write' file names!

  Z

• Compressing files for the WinSxS folder

  I wonder why the folder winsxs in Vista and Windows 7 do not use file compression? Due to the nature of the case, it would not affect the performance of the system and would save several gigabytes of disk space.  The only files that can be skipped is the manifest files that are less than 4 KB of size...

  The INF file is very small, I think it wise to use compression for a file on this folder as well :)

  Each regular on NTFS file can be considered be a single 'hardlink' a data element. You can have multiple hard links, which is like having the same file in two places with just the cost of the extra link and not the data. The '. 'and'.. ' directory? A few hard links in the current directory and the directory's parent. WinSxS is full of files that are installed as components, usually of Windows and other Microsoft software. When these recommended "settled" in a given place, what actually happens is that a new link (hard link) is created in the data file. It is one of the reasons why Vista can be installed that on NTFS - it made prolific use of hard links. The physical files has obvious implications - you're not only compressing the installation media, but only copies of the actual files that make up Windows. If you package, part of what you package consists of installed files - or files that you can install later. And Windows (or other applications) do not always provide a compressed file. For example, Vista will choke if you try to install the libraries shared IIS and its XML schema for winsxs files are compressed. They probably check that it still has the read-only attribute and I forgot to allow the presence of other attributes. Personally, I think it's a bug, but whatever it is, there is a risk that you must be aware of. No need to cherish luxuries (cause everythine come and go) even the life you have is borrowed (Cause you are not promised tomorrow)

• How to access some files from the Windows.old folder?

  I recently made the mistake of updating my OS before save lots of interest - information is all the info from Outlook, I had (e-mails, contacts and calendar).

  I have posted a question to the Board of Directors of Windows Vista for the cat, but was recently informed of this discussion here.

  THUS,.

  I was told I could "...". Browse to C:\Documents and Settings\xp_username\Local Settings\Application Data\Microsoft\Outlook and move the pst file in My Documents folder.  It is a hidden file so you will need to activate the hidden files and folders. »

  When I tried to do, I got as much as Windows.old > Documents and Settings > xp_username, but when I click on the "Local Settings" folder, I get a message telling me:

  "C:\windows.old\Documents and Settings Settings\xp_username\Local is not accessible.  Access is denied. »

  I get a similar message when I try to enter in the Application Data folder in the xp_username folder.

  How can I do at this point?  Thank you!

  Try this link:

  Windows Vista junction points
  http://windowsconnected.com/blogs/joshs_blog/archive/2006/09/28/Windows-Vista-junction-points.aspx

  see if your "C:\Windows.old\Documents and Settings of utilisateur\Local Settings\nom" has a shortuct looking for icon. If it changes to the command prompt in the directory that contains the junction point, i.e. "C:\Windows.old\Documents and Settings\nom of user' can do a: dir / a: s *. at the command prompt.

• Remove a file from the system32/drivers folder, keyboard does not

  After receiving warnings from Kaspersky on the activity of type keylogging I foolishly deleted the file in the Windows\system32\drivers folder and after a disconnection cannot return the keyboard no longer works. Can't remember which file it was, but obviously, it must have been a keyboard driver. Tried in safe mode back to last good configuration and safe mode to identify you with no success. Tried a keyboard ps2 without success. Anyway around this or could it be fixed easily if I took it for repair?

  Hello

  Once you're up and running again after doing a restore system http://www.microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx

  Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• All files in the My Documents folder disappeared?

  I didn't remove them, and they are not in my trash. I tried to go to the control panel and display hidden files, but they aren't there yet. Help, please! Oh and my pictures and everything are still there... it's just the stuff in the My Documents folder.

  Hi coriedanielle,

  You may be using McAfee?  If so, the following may apply:

  http://service.McAfee.com/faqdocument.aspx?ID=TS101228

  I hope this helps!

• Restore failed image because of the message error "system cannot find the specified file (0 x 80070002). Is my file of the backup OK folder structure?

  I had to reinstall clean Windows 7 64-bit because of the failure of the RAID 1. I have a picture of my original installation system, but I can't restore it; everything I try, I get the message "system cannot find the specified file (0 x 80070002).  I work through a number of possible solutions, without success so far.

  According to the kb/951002 (that is for Vista but I can't find an alternative for Win 7) I made sure that the SYSTEM account has read permission for the backup folders and subfolders.  However, the file structure of the specified in the above article backup folder is different from my image file structure.  Specifically, article specified a structure of 'N.zip' file for the backup files but mine are a mixture of XML documents and VHD - i.e. no "zip" files Also, my GlobalCatalog file does not what kind of file, for example, it wouldn't ".wbcat" required file type specified in the article.

  The differences above could explain the inability to restore the image and if so, any ideas on what to do about it?

  Kind regards

  Ian

  Thanks Mick, will redirect the request.

  Kind regards

  Ian

• can't the files in the drive and folder views hdd

  My PC suddenly drives don't consider files and folders of the HDD (its WD my passport), until it either works normal.
  Now its only can views my WD by recent place, but not a problem when the views or open the device such as digital camera files.
  I had tried together by folder option as the solution of windows but do not succeed. I think that my HARD drive have the problem, but can he views my friend PC, please help... Thank you.

  Hello

  Thanks for posting your question in the Microsoft community!

  I understand from the description of the question, you aren't able to view the files in the hard drive. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Let us try the following methods

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow how to reset the computer to start as usual after a repair by article KB929135 clean boot to reset the computer in normal mode.

  Method 2
  If the problem persists, then I suggest you to perform system restore to the date it was working fine.

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  After trying the steps above suggested, giving us the results. If you are able to solve the problem view files to the hard drive or let us know additional troubleshooting results.

• Compress files in the filesystem windows of Oracle 11 g r2

  I currently have an external C DLLs that call from a library of Oracle who calls a specific batch file that will zip some files on the file system, oracle has created. Is there an extproc no / no java to compress the files in the file system on Oracle pl/sql only use?
  
  The order of the current routine:
  1 oracle creates several text (via utl_file) files on windows, file system
  2 oracle writes a file of commands (via utl_file) to call the command line winzip to compress all files has created and also a few images on the windows file system
  3 oracle, then calls the library that calls the dll that executes the commands on the system file
  
  Thank you
  Robert

  Yes - DBMS_Scheduler can do with executable type work.

  Here is a sample for a unix executable.

  begin
    dbms_scheduler.create_job(
      job_name            => 'job_scp'     ,
      job_type            => 'EXECUTABLE'  ,
      job_action          => '/usr/bin/scp',
      number_of_arguments => 2             ,
      start_date          => null          ,
      enabled             => false         ,
      auto_drop           => false         );
  end;
  /
  

• problem to find AS3 files in the source path folder

  Hi all
  I use:
  < mx:Script source = "MyFile.as" / >
  where MyFile.as is inside a source path.
  I defined the source path by:
  Project/Properties/Flex Build Path / Source Path / add a folder
  and added:
  c:\dev\myClasses
  
  the actual file is now located at c:\dev\myClasses\MyFile.as
  but I get the error:
  Problem finding the external file: MyFile.as
  
  Add the source path created a source file in the project folder, called "[source path] myClasses.
  I tried
  < mx:Script source="myClasses/MyFile.as"/ >-> failure
  < mx:Script source = "[source path] myClasses" / >--> is not (obviously, but hey... I'm stuck on it for 2 hours now :)))
  
  any help?
  Thank you
  

  It makes perfect sence, in OOP, you can just include a class and start to use it, so that there are import features.
  You can only include a flood a/s (no class files).
  Kind regards.

• What is the address of the file containing the emails on drive "C"?

  HI: I am unable to locate the files on my disk C holding for different folders, such as Inbox, sent, Junk, etc...

  Easier is to go to the Application menu (icon with three horizontal lines on the right side of the mail toolbar) and select help-> troubleshooting information.
  Then click view file in the section the Application databases.
  The files holding your mail are under Mail and ImapMail, depending on your type of incoming mail server...