Computer automatically starts in safe mode and not in normal mode
Original title:
My system is Windows Vista, which is stuck in safe mode. I tried several to restart in normal mode to have the computer open again in safe mode. Need help to get out of safe mode and return to normal mode. Thanks for any help!
Hello
Tags: Windows
Similar Questions
-
computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.
-
Why my computer keep starting in safe mode
Why my computer keep starting in safe mode, it doesn't let me do system restore and health comes back fine but it says I have hardware or network problems
Well, to prevent to load in safe mode, you should be able to press F8 when your computer starts, then select start windows normally. If it says that you have hardware problems or network you can or you can't. If you start windows normally and nothing seems wrong, you can start the Device Manager to check the hardware and just go on the internet to see if the network is fine. To enter the Device Manager, right click on my computer, then select Properties, then on the new close window left click Device Manager.
-
Computer Vista starts in safe mode, it is impossible to remove malware
'Vista' of computer starts in safe mode. AVG on and execution of 52 Trojan detections and system leave not Malbytes {sic} program remove them. I tried all of the obvious solutions. Also I can not save and restore any files there I MISS my XP!
oxooccc0e
Hello
See the following message to use to restore access to Windows AFTER you'RE sure that the machine is
Malware free.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Computer still starts in safe mode
Original title: pls help!
I have a macbookair running windows7, after that a s clicked improper shutdown 'start in safe mode' by mistake. Now, it runs very slow (about 10 seconds for mouse to move from one side of the screen to the other). When I restart properly, or stop and start again, it is constantly upward in safe mode... any ideas how to solve this problem?
Hello
Welcome to the Microsoft community!
The computer starts in safe mode, and work slowly.
Computer would boot in safe mode if the safe mode startup option is enabled in the system configuration utility.
Uncheck the boot option:
Method 1:
To disable:
a. Click Start, type msconfig.exe and press enter
b. now click on the Startup tab and uncheck the option of safe mode.
To work with the computer is slow:
Method 2: Run the troubleshooter of performance
See the site:
Open the troubleshooter of Performance
http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter
Method 3: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
See the mentioned site:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.
Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
My computer only starts only Safe Mode
Yesterday, I had no problem with a normal startup of windows vista Home premium, but late in the evening, it was not react to anything that either, so I turned off my computer by pressing the power button. This morning I wanted to start again, but after the windows loading screen, I got a black screen for a minute or 2, then it is restarted again. the only way I can go into my computer is in safe mode, which works very well. I can't remember where I left my installation CD, because this computer is quite old already (for one computer) what to do?
Hello
Here are three methods that you can try to solve your problem
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode (which you are already in)
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start (
) button. - In the search box of the Start Menu, type in msconfig
- Then press enter on your keyboard.
- The System Configuration utility opens
- Make sure that Start Selection is set for Normal start.
- Click the Startup tab.
- Make sure you start is not checked
- Press the apply button and then press the OK button.
- Click the restart button to restart your computer.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If these methods do not fix the problem, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
You can borrow a Microsoft DVD from a friend, if you do not or can not find yours.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
See you soon.
-
Computer guard boot in safe mode, following a bad virus
Hello world.
My laptop was recently infected by a rather nasty virus that stopped me being able to open my anti-virus (avast) software in order to get rid of it. There was a lot of other programs I could not open the internet including Explorer. I left my computer for a few days and decided to buy a system restore software to completely erase my hard drive. I was quoted £50 so I decided to have a last date. I started windows in safe mode and miraculouly managed to open avast this time, I did a full scan and 9 infected files deleted.
All the virus seems to have disappeared, but there are a few remaining problems. Now, whenever I turn on my computer windows starts in safe mode (even when I select the option to start windows normally). Windows Explorer keeps not working and closure (for example, when I try to go to the control panel) and my laptop will not connect to internet broadband in my house.
Is it possible that I deleted some important system files while getting rid of the virus, or everyone recognizes it as something else? I'm scared, I'm just a normal user, and I don't know too much about computers so please go easy on me.
I'd appreciate any help anyone can offer.My operating system is windows vista.
see you soon
Hello
No one program cannot be used to detect and remove any malware. Added that often easy to
detect malware is often accompanied by a much more difficult to detect and remove the payload. If it is better
to be too full now than paying the price much later. Check with them to an extreme overdose
point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:
IRQL_NOT_LESS_OR_EQUAL
and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).
PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?
I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.
Thank you very much!
Try this to save your data:
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner -
My screen keeps freezing same mouse and I have to close my computer and start in safe mode
Original title: screen freezing same mouse helps getting more frequent
Hi all my screen keeps freezing same mouse and I have to close my computer and start in safe mode, I have windows vista. its most frequent doing, I tried to look at the error logs and so on, told it could be my macfee product and another said it was critical error id 400? I'm quite beyond my depth, I did scan virus and his watch not that I have nothing. Please help, I am a real novice so please explain as easy as you can, thank you very much
Ensure that your data is backed up / copied to external media. It seems that your PC has a hardware problem. If it's a name brand PC, for example Dell / HP etc it may have preinstalled utility test read the manual or manufacturer's web site
If it's a generic PC, then your machine to HD will have a free test bootable utility, for example SeaTools from Seagate
To test the memory, www.memtest.org
-
Phone constantly optimize the applications and does not start in safe mode.
Hello, I restarted my phone yesterday morning and it has been "Optimizing apps" since then, I have no access to a pc that I work away from home, I reset hard it loads of times and tried to start in safe mode by using low volume and power (it does not restart the phone the sony screen over and over) is here something I can do to get the z3 works again? Any help is appreciated!
You will need a computer to use the CCP or bridge
Bridge (for Mac)
Alternatives on how to backup Xperias
-
Windows xp does not start in safe mode how to
Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration
When you choose to start safe mode, which is the last thing you see on the screen?
When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:
Disable the automatic restart in the event of system failure
Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.
If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.
You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.
If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:
Here's a BSOD example showing information you provide:
http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg
Send for the nose and the Red arrows (3 to 4 lines total).
Send all * line STOP message since there are clues in the 4 parameters.
If it looks like there is some kind of name listed in the STOP message file, send this line also.
Ignore the boring text unless it seems important to you. We know what a BSOD looks like, we need to know what your BSOD looks like.
Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).
You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?
-
Update will not finish, want to start in safe mode, please help. It's updated Aug.5 2016.
Start in Safe Mode. What do you expect to make? You must do this:
Reinstall El Capitan without erasing the drive
Please make sure that you back up.
- Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
- Select disk utility, then click on the continue button.
- Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
- Click first aid icon in the toolbar. Wait until the button is active, then click it.
- Quit disk utility and re-enter the Utility Menu.
- Select Reinstall OS X and click on the continue button.
Also, see this tip for user: basic steps for the OS X upgrade.
-
Computer hangs, reboot, can only start in safe mode
Original title:-i can only start in safe mode
Ive tried to use several restore points but when I try to reboot the computer freezes and I have to start in safe mode
Safe mode is a mode where Windows works only the bare minimum programs and processes necessary to the performance of your system. When you start in Normal mode, many more processes and applications running. At least one of these programs or process causes your computer to crash. If your task is to identify this program/process and, at least temporarily, to prevent it from running at startup. Microsoft has a tool that you can use to selectively disable or or the process that normally run at startup called "msconfig". It can be a long and exhausting iterative process of turning things off and restart to see if it you fixed program, but that's what you do:
"How to solve configuration errors by using the System Configuration utility in Windows XP"
<>http://support.Microsoft.com/kb/310560/en-us >
First, disable all items "start-up". If it does not, set it to 'Services '. If this does not work, then reactivate some of them and try again until you zero - in on the culprit.
HTH,
JW
-
laptop computer starts in safe mode, can't backup recovery, system used retore help
My laptop starts in safe mode, I can't make systems, backup files recovery failed, do not have a vista disk to run vista, need help
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
-
My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome. System also starts on the Vista CD.
System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.
That's it, that's all what he will do. I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.
I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.
Help or direction is appreciated.
original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.
See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer). Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.
So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step. Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair. Check out several options and compare the costs, quality and guaranteed and then make your best decision.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Qosmio G10: Write failures, strange noises & locking system on
Hello IM currently away on holiday with my laptop and im having write failures and strange noises coming from the speaker system and the system of keeps locking up. Any ideas?
-
How to disable LogosXT RT 2009?
Hello There is very little info on this topic. As far as I see it, there are no same info describing logos uses UDP, and LogosXT uses the TCP protocol. I know since LogosXT has caused me problems in 2007/2008 trying to pass of LabView 8.2 to 8.5. The
-
My 4601 7 slate does not detect my Bose Bluetooth speaker
1
-
'Restore the Systerm' is acualy restore to an earlier date.
Yesterday, I tried to do a Restore Point, and then I typed in the name of the it and click on create. Say 2 seconds later, it showed a message and an error code (error code was: 0x80070005) saying: 'access denied '. I tried to restore to a date earli
-
Cannot install Windows bluetooth device
Impossible to update your Bluetooth driver to connect my Samsung Note edge to my HP laptop workstation. I am able to see the device, but not able to stream music. Device is listed under devices in the window, but with an error.