Computer guard boot in safe mode, following a bad virus

Similar Questions

• Computer still starts in safe mode

  Original title: pls help!

  I have a macbookair running windows7, after that a s clicked improper shutdown 'start in safe mode' by mistake. Now, it runs very slow (about 10 seconds for mouse to move from one side of the screen to the other). When I restart properly, or stop and start again, it is constantly upward in safe mode... any ideas how to solve this problem?

  Hello

  Welcome to the Microsoft community!

  The computer starts in safe mode, and work slowly.

  Computer would boot in safe mode if the safe mode startup option is enabled in the system configuration utility.

  Uncheck the boot option:

  Method 1:

  To disable:

  a. Click Start, type msconfig.exe and press enter

  b. now click on the Startup tab and uncheck the option of safe mode.

  To work with the computer is slow:

  Method 2: Run the troubleshooter of performance

   

  See the site:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Blue Screen (screen of death) occurs at the Normal boot and Safe Mode

  I have a problem with my acer 1 aspire d255-2351 it starts up like the ordinary thing, you know then this screen blue suddenly pops up then shutts down while I tried all methods to try to resolve the problem, it shows the blue screen I have a pop can and not same acecess to the laptop even on safe mode , I can't use that cause one before having this tringleSi say the files of your computer may have been currupted then went away so if you give me a shout on my email I'll be mre recognizing an am open to any other spirits who may be able to help me with this mail to the test is * address email is removed from the privacy * wait someone thought

  Hello Tensa_Zangetsu,

  Do you know what the exact when stop code it bluescreens?

  I was curious as to whether or not we can boot to Safe Mode command prompt only.

  If so, we can run the following command followed by the Enter key:

  CHKDSK C: /f

  This, until we do not get errors from her and then try to restart in Normal mode.

  If the Safe Mode command prompt only does not work, we can start the recovery console and run the same command:

  http://support.Microsoft.com/kb/314058

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

  my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

  Hello

  As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Whenever I turn on the computer, open only in Safe Mode, when you attempt to open in Normal mode is never opens.

  We had bad storms, blinking power and computer when outside on / off. When I rebooted, it will only restart in the safe - in the PAST, we had errors and disk errors when the update to the Service Pak3 who ended up being fixed.

  Hi zpolgar,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-XP-will-only-boot-in-safe-mode-after/5f2af265-a8d9-4712-8CF1-d56c1ede17d5?page=1

  I hope this helps!

• my computer does that in safe mode, it does not start in normal mode, my Security Center opens not or my updates of the widow.

  Hello

  my computer has stopped working on normal mode. I have to use my computer on safe mode.

  My Security Center lights.

  Windows dates won't turn on.

  I think having a consistency of disk.

  Can someone help me?

  Hello

  1. what exactly happens when you try to start in normal mode?

  2. do you receive any error messages?

  3. don't you make changes to the computer until the problem occurred?

   

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore.

  Method 2: Perform a clean boot in safe mode

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

   

• Computer automatically starts in safe mode and not in normal mode

  Original title:

  My system is Windows Vista, which is stuck in safe mode.  I tried several to restart in normal mode to have the computer open again in safe mode.  Need help to get out of safe mode and return to normal mode.  Thanks for any help!

  Hello

  1 you get an error message when you start the computer, which leads it in safe mode?
  2. are you aware of any changes made to the computer, before the show?
  Follow these steps and check.
  a. click on Start and then run.
  b. type msconfig in the Open box and click Enter.
  c. click on the Startup tab.
  d. uncheck the box for safe mode.
  e. click on apply and OK.
  I hope this helps.

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• my computer is stuck in safe mode

  my computer is stuck in safe mode. need help please, I do not understand how to get out.

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I stop Vista to boot into safe mode? Vista does not meet F8 when starting upwards.

  How can I stop Vista to boot into safe mode? Vista will not run on F8 before Windows starts.

  Update: I did system restore and still Vista boot in safe mode. More, start > run > "msconfig" > tab "Startup" and "Safeboot" was not selected. Any other suggestions?

  Vista still restarts in safe mode. 'Safe Mode' will now appear in the four corners of the screen and "Microsoft (R) Windows (R) (Build 6001: Service Pack 1)" appears at the top to the center of the monitor. ???

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• No administrator account on my user ID. There is a boot in safe mode

  I just had a new hard drive installed with xp. When I login with my username I notice there is no under Documents and Settings administrator account. It has no administrator under USERS account. When I boot in safe mode, the administrator account is here. How can I get the administrator to display on my ID?

  Cannot delete the administrator account.  That is, it does not display.  To show this, open a command prompt window (start-> Run-> "cmd") and enter the command:
  net users
  This will display a list of all the users set up on your system.  I bet that 'Administrator' is one of them (as in 'comments').

  To connect as an administrator, you should disable the auto logon in Windows XP feature that allows to bypass the login screen.

  'Windows XP ignores the 'Welcome' screen and automatically displays the desktop'
    <>http://support.Microsoft.com/kb/305906 >

  HTH,
  JW

• Why my computer keep starting in safe mode

  Why my computer keep starting in safe mode, it doesn't let me do system restore and health comes back fine but it says I have hardware or network problems

  Well, to prevent to load in safe mode, you should be able to press F8 when your computer starts, then select start windows normally. If it says that you have hardware problems or network you can or you can't. If you start windows normally and nothing seems wrong, you can start the Device Manager to check the hardware and just go on the internet to see if the network is fine. To enter the Device Manager, right click on my computer, then select Properties, then on the new close window left click Device Manager.

• My screen keeps freezing same mouse and I have to close my computer and start in safe mode

  Original title: screen freezing same mouse helps getting more frequent

  Hi all my screen keeps freezing same mouse and I have to close my computer and start in safe mode, I have windows vista. its most frequent doing, I tried to look at the error logs and so on, told it could be my macfee product and another said it was critical error id 400? I'm quite beyond my depth, I did scan virus and his watch not that I have nothing. Please help, I am a real novice so please explain as easy as you can, thank you very much

  Ensure that your data is backed up / copied to external media. It seems that your PC has a hardware problem. If it's a name brand PC, for example Dell / HP etc it may have preinstalled utility test read the manual or manufacturer's web site

  If it's a generic PC, then your machine to HD will have a free test bootable utility, for example SeaTools from Seagate

  To test the memory, www.memtest.org