Computer configuration virtual for SRM - files from memory Swap file/Virtual - best practice replication?

Similar Questions

• NTFS file cluster best practice deployment of Windows server on vSphere 5.1?

  What are best practices, VMware or Microsoft that I need to know to make sure the server that I created 2 x Windows Server 2008 SP2 Enterprise MSCS of NTFS file (active / passive Cluster) can operate reliably to be accessed by more than 1,000 people?

  The underlying data disk is RDM because I need to replicate the LUNS in the DR site using the tool table of SANCopy.

  • SCSI controller LSI Logic SAS in Paravirtual changed

  Not really an option... This is not supported by VMware in an MSCS configuration...

  / Rubeck

• File system: best practices

  Hello, all!
  
  What file systems (OS) should be used to store data files (best practices)?
  
  Thank you for advice!

  user13299586 wrote:
  Hello, all!

  What file systems (OS) should be used to store data files (best practices)?

  Hello

  Linux: ext3
  Solaris 10: zfs

  For the best performance on ext3, you want to set the following (if possible):

  sysctl-w vm.dirty_background_bytes = $((10*1024*1024))
  sysctl-w vm.dirty_ratio = 40
  sysctl-w vm.dirty_expire_centisecs = 1000

  In addition, put those in /etc/sysctl.conf to make them permanent.

  On ZFS.

  Set zfs:zfs_no_write_throttle = 0x1

  or

  Set zfs:zfs_write_limit_override = 0 x 2000000

  Charles Lamb

• How to configure Jdeveloper for the page from right to left - Arab

  Dear all,
  I'm using Oracle Jdeveloper 11 g, how can I display the page from right to left (Arabic language)
  and also the built in message for validation and errors, how to display it in the Arabic language.
  
  The best and best wishes,

  you use Trinity - config.Xml... and mention
  
  http://download.Oracle.com/docs/CD/E15051_01/Web.1111/b31973/ap_config.htm
  chk for righttoleft

• What is a physical server to virtual best practices?

  I have a physical server with an attached drive HP 6400 Bay.

  We want to convert it to a virtual machine.

  What is advised to do?

  Hello

  For me personally I'd go with rehabilitate VM manually and then import / migration of data from P2V (using VMware converter) is generally not the sweet/good approach.

  in regards to the San, you can deploy the virtual machine as RDM virtual mode as a pure big VMDK (2 TB - 512 bytes).

• Store file path - best practices

  I have a database that stores the path to the images that are loaded in a page.  All files are stored in the same folder.  My question: is it better to store the path of the entire file in my db or should I simply store the name of the file and make a constant on the Web page requesting the photo?  I think it's the second option, because there is less data in the DB but I wanted to just make sure.

  Thank you!

  If the path is always the same, I stock just the names of files. Another option is to create a new field in your table for the path and assign the current path as the default value. When you insert records, simply add the file name; the path field will take just the default.

  In your SQL:

  SELECT *, CONCAT(path, filename) AS image
  FROM mytable
  

  If you already have records stored in the table, you can be updated very quickly with two SQL queries:

  UPDATE mytable SET path = '/path/to/images/folder/'
  

  UPDATE mytable SET filename = REPLACE(filename, 'path/to/images/folder/', '')
  

• best practices for networking for esx / vsphere 6

  best practices for networking for esx / vsphere 6

  Refer to VMware best practices documentation to get the depth on the networks.

  https://www.VMware.com/files/PDF/Techpaper/VMware-PerfBest-practices-vSphere6-0.PDF

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2107948

  https://www.VMware.com/files/PDF/Techpaper/VMW_Netioc_BestPractices.PDF

  See also below article for best practices documentation relating to the different versions of vSphere.

  http://vmwareinsight.com/articles/2016/5/5798853/best-practices-for-VMware-vSphere-architecture

• best practices for placing the master image

  Im doing some performances / analysis of load tests for the view and im curious about some best practices for the implementation of the image master VM. the question is asked specifically regarding disk i/o and throughput.

  My understanding is that each linked clone still reads master image. So if that is correct, then it seems that you would like the main image to reside in a data store that is located on the same table as the rest of the warehouses of data than the House related clones (and not some lower performing table). The reason why I ask this question, it is that my performance tests is based on some future SSD products. Obviously, the amount of available space on the SSD is limited, but provides immense quantities of e/s (100 k + and higher). But I want to assure you that if, by putting the master image on a data store that is not on the SSD, I am therefore invalidate the IO performance I want high-end SSD.

  This leads to another question, if all the linked clones read from the master image, which is general practices for the number of clones related to deploy by main image before you start to have problems of IO contention against this single master image?

  Thank you!

  -

  ---

  Omar Torres, VCP

  This isn't really neccissary. Linked clones are not directly related to the image of the mother. When a desktop pool is created and used one or more data stores Parent is copied in each data store, called a replica. From there, each linked clone is attached to the replica of the parent in its local data store. It is a replica of unmanged and offers the best performance because there is a copy in every store of data including linked gradient.

  WP

• Please advise a computer artist from novice about requirements for large files in PS?

  I am researching my next computer.

  I'm an artist currently using CS2 to rework my paintings into prints.

  http://s719.Photobucket.com/albums/ww198/blueridernz/Rachel%20Thompson%20Portfolio/?albumv iew = slide show

  The paintings have been digitized in high resolution and are 500 MB.

  Image files I work with are large, but the process is simple, I'm extracting and collages.

  Nothing too technical here.

  As I need to print large, 9' x 4', the end result file could be 2 GB which I understand is the limit for PSD files.

  I'm not games or editing video, just files work with large images.

  What I've read I think I need

  Core i7

  Game 12 of 3 GB RAM

  GeForce GTX 460

  Any advice appreciated,

  Rachel.

  The graphics card is perhaps a little exaggerated, if you paint really just and retouching in PS. A less hungry and less expensive model power would do the trick. The rest should do just fine, but remember that it will not do much good if you don't get a 64-bit operating system and may also upgrade CS5 to make use of all these resources. You might not even be able to install CS2 on Windows 7...

  Mylenium

• How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created?

  I have an external hard drive that I loaded all my important files on all my computers. There is a file that I put in place restrictions to access, but it has been so long that I don't know how I did it or how to remove it. How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created? The computer that I created the folder of running Windows Vista. I am not able to access files in this folder from any other computer. It gives me the following error: "E:\School is not accessible. Access is denied. »

  Hi mango127,

  I suggest that you give all permissions for everyone on this folder and check if it works.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  If the previous step fails then I would suggest that you take the backup of this folder on the computer you were accessing and later to format the hard drive.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

• How to stop the pop-up for saving files when I start the computer?

  I was going to save files on a drive of DVD-CD-R, but I decided to do not, how can I stop the pop-up for saving files when I start the computer? It keeps appearing even though I cancelled check?

  * original title - cancel recording of dvd/cd-rw *.

  Hello

  Windows displays a temporary storage area where files are held before they are copied to the CD. Files or folders located in the temporary storage area are listed under files ready to be written on the CD.

  Try the steps and check them off below if it helps:

  a. double-click my computer and then double-click the CD burner.

  b. under CD writing tasks, click on delete temporary files.

  When you delete the contents of the temporary storage area, you can set this field to another set of files and folders that you want to copy to the CD. The files are not deleted from their location on your computer or on the CD.

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.

• My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?

  original title: office / Home compatibility

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  Yes. There is no problem with their two different versions of
  Windows. The files contain not what anyone who still marks that
  Windows version they were created under.

  But there is a potential problem. If the files have been created with a
  another version of Office that you have, you may have
  Difficulty reading the. For example, Word 2007 and 2010 creates .docx
  files by default (unless you tell her save as .doc) and if you
  an earlier version of Word, you will not be able to open a .docx file
  unless you install the compatibility pack to
  http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspx

  or http://tinyurl.com/29f5scy

  Ken Blake

• Hoax call on notifications about a virus tries to hijack your computer and ask for help to remove the files?

  OT: security.

  Dear community,

  Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.

  any help would be appreciated

  Thank you

  Hello

  It's a scam.

  Here are the tips that we regularly give the posters who receive these types of calls:

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

• BlackBerry Smartphones to transfer files from memory card to device memory

  Hi... the subject seems pretty basic.

  But when I plug my 8330 to a computer, I can access only files in the directory "Blackberry", which are files on the SD card.  I want to be able to access files / photos stored on the memory of the device.  I thought that to transfer the files from the device to the SD memory memory then would allow me to download on my computer

  Someone knows how to do this?

  Thanks in advance.

  Go to the media, press menu and Explorer, go to the memory of the device to locate the file, select the file menu, and then tap new and move