Computer continues to try to install the backup. He asked me to find a path to a folder containing the installation package 'SpareBackup.msi' I can't find it anywhere on my computer.

Similar Questions

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Looking for the installation package "AcroPro.msi" - my computer says it is already installed, but I can't find or enforce

  I am looking for the installation package 'AcroPro.msi ".  I had already installed Acrobat Pro XI, but he seems to have disappeared, although the computer says it is installed.  Where can I find this installation package?

  I use Acrobat Pro to save documents as pdf files, mainly tax statements and the documents provided to clients

  Hi Billström,

  What was the Acrobat version installed on your machine.

  You can visit this link to download the version of Acrobat you have: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  If you have windows, click Start > in the search box, type Adobe Acrobat and wait and see if you have Acrobat that are listed there, or you can visit \Adobe\Acrobat 11.0\Acrobat C:\Program Files (x 86) and search for "Acrobat.exe" or "Acrobat". He should be here if you have already installed Acrobat.

  Kind regards

  Ajlan Huda.

• Error "the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.»

  What is an installation package "status.msi", it doesn't let me access my command to scan on my HP officejetJ5780 all-in-one.  It indicates that the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.  It's also prevents me to access my backup disk.

  Original title: status.msi?

  I restored my computer to a period of time, two weeks earlier and which seem to fix the problem, somehow.   Thank you

• An installation package for the software aio 02 of the ps product cannot be found. How to find or install the installation package?

  Windows Vista Ultimate 32-bit

  Message appears at the beginning upward.

  Accompanied by msg: try installtion again using a valid copy of the installation package 'ps_aio_02_software.msi '.

  and: the component you are trying to use is on a network resource is unavailable.

  and: click OK to try again or enter a different path to the folder containing the installation package 'ps_aio_02_software.msi '.

  I don't know what function I am using.

  Unfortunately, I am not very computer.

  Any help would be appreciated!

  Thanks in advance

  Joe

  Hello

  It seems to be to do with the HP software.

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/PS-AIO-02-software-MSI-error-on-boot-up/TD-p/2218373

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/uninstalled-a-program-I-shouldn-t-have-Windows-Vista/TD-p/219859

  And this HP link explains different .msi errors:

  "" The component you are trying to use is on a disk that is not available"or a similar Message appears on the computer in Windows.

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01631295

  See you soon.

• "The feature you are trying to use is on a network containing the installation package"status.msi"in the box below.

  Original title: the status message appears on the start page.

  Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below.

  Hello

  Have a few questions that might help me to analyze the cause of the issue you're having with your computer.

  ·         When you get the message that says, "Status.msi file missing?

  ·         You have an installed HP printer?

  ·         You made any hardware or software changes the computer recently?

  Method 1:

  You can try to clean boot and check if you still get the error message.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the article.

  Method 2:

  If the problem persists, you can try to restore the system on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Hope this helps

• Update continues to try to install the upgrade of Windows 10 unsolicited

  Since August 2 updater tried daily install Windows 10 upgrade on my computer.  I didn't, and I don't want Windows 10 so far all attempts have failed, but how do you stop trying?

  It is likely Win10 has already downloaded on your PC.  If you are using windows 7 and have not installed win10 and do not, here is a procedure that I have several times and it works.

  1. Take Windows Automatic Update

  2. Task Manager, processes, find and put an end to GWX.exe

  3. Control Panel, uninstall a program, see installed updates, WAIT a long time

  4. Now enter KB3035583, uninstall it

  5. Restart the PC

  6. Disk Cleanup, step 2 for system - it takes some time

  7. You should find a file that is about 5 G.  It's the downloaded Win10 file

  8. Delete

  9. Restart

  10. The start-up will take a while as he finished cleaning

• It shows incorrect serial number when I try to install the CD

  It shows incorrect serial number when I try to install the CD

  Hello

  You can please click the link below.

  Error "serial number is not valid for this product". Creative Suite

  Error failed to validate the serial number | CS6

  Hope this will help.

• Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

  I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit).  The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade.  I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013.  Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0.  If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

  I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected).  How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0?  If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

  Bob_Schor wrote:

  You run your VI of a project?  If so, you can watch the dependencies and get an idea of what live "in charge", you might have.  There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

  If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI.  If all of your relevant screws are in a single folder, add the entire folder.  Now look in the dependencies.

  BS

  Yes, I run the VI from within a project of LV.  After some more research in the knowledge base OR I could solve the problem by using the following procedure:

  1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

  2. restart the PC

  3. open the project, close the project by choosing "save all".

  4. restart the PC

  5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

  6. restart the PC

  7. open the project, close the project by choosing "save all".

  8. open the project and run the VI.  No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.

• How can I remove the 'State' that wants an installation package "status.msi" I do not have?

  This laptop does not accept even in SP3. It doesn't have enough RAM for Win7.   I got rid of bad bits with chkdsk.  Status tries to install all the time & I can't find how to remove it.

  Hello
  I've got SP3 now after 2-3 attempts.  (Just 'failed to install.")
  And for the status "the component you are trying to install is on a CD or another removable disk that is not available."
   
  "Insert the diskette in the State, and then click OK.   Use Source 1. "The next window"cannot find an installation package for the product status.  Again the installation again using a valid copy of the installation package "status.msi." "
   
  The link with Microsoft wasn't working, so I checked on Google and found this annoying file is a file of HP printer so I deleted the HP printer program, which got rid of the file.  It seems, I then have to re - install the program without checking the update box, I'll try it when I have the time.
  Thanks a lot for your help.

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• I try to install the two updates, they do not have continually it says error unknown 66A?

  I try to install the two updates, they do not have continually it says error unknown 66A?

  Hello

  Is update fails with error code?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try a clean boot, and then try to install the updates.

  How to solve problems using the boot in Vista:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, please be sure to try step 7 to reset the computer as usual.

  Method 2:

  If it still fails, try to download and install the update manually by using the following link: http://www.microsoft.com/download/en/default.aspx

  If there are still problems, install the update, reset the Windows Update components

  Reset the Windows Update components: http://support.microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

• Computer crashes when you try to install the Sims 2: Double Deluxe from the disk

  Original title: need help to install the Sims 2 double deluxe on windows 7!

  So I bought a new hp laptop the other day with windows 7. When I tried to install the sims 2, AutoPlay does not appear. I therefore went into my computer and right-click on the driver to open the disc so I could install it elsewhere instead, but it freezes on me. I tried a couple times, but it keeps freezing. And the only way to stop the gel's out the disc deluxe double sims 2. I'm reallly need help with this problem.

  Hi kitkatz155,

  You can try to start the computer in a clean boot state, try to install the game and check if this solves the problem.

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005

  I try to install the update update of security for SQL 2005 service pake 3.  I have vista 2 this update applies to my computer I get an error code ff or c0000005

  1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)

  2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0

  3. restart the computer

  4. install the same update.  It should work.

• I try to install the updates, but continue to flock to the top with these three who fail; Code 64 c, 66A and 645.

  I try to install the updates, but continue to flock to the top with these three who fail; Code 64 c, 66A and 645. any help?

  Hi George8371,

  Please take a look at the KB codes error '0x8007066A' or '66' occur when you install updates of .NET Framework with some additional troubleshooting.

  I hope this helps!