Computer doesn't come out of hibernation
Original title: hibernation PROBLEM
My Dell Inspiron 14 Intel N4050 running windows 7 Professional with service pack 1 fails to get out of hibernation and became very slow... Please help!
Hello
Were there any changes (hardware or software) to the computer before the show?
Method 1: Run the troubleshooter and check.
Open the troubleshooter of power
Method 2: download and install display drivers.
Updated a hardware driver that is not working properly
Method 3: perform the steps from the link and check.
Optimize Windows 7 for better performance
Hope this information helps.
Tags: Windows
Similar Questions
-
Windows Boot Manager: your computer can't get out of hibernation
Sometimes when I turn on the computer after that he was unable to get out of hibernation, a black screen appears stating that:
Windows Boot Manager
Your computer cannot come out of hibernation.
Status: 0xc0000411
Info: A fatal error occurred processing to restore data.
File: \hiberfil.sys
Any information that was not justified until the computer is entered in hibernatioin will be lost.
Any information you can provide on how to solve this problem would be greatly appreciated.
Thank you for your help.
only @phil_34! => To avoid confusion and duplication of effort, please post all further follow-up replies to your original thread: http://answers.microsoft.com/thread/856d02a2-837c-4e10-ad51-82039bf5c166
-
Windows stops after it comes out of hibernation.
For some reason it stops when the computer comes out of hibernation. He does this only when I don't do anything with the computer immediately after that it go to the desktop. I guess like 5 minutes away she just stops while I am not. When I turn it back on, it always starts in the same condition it was when it entered hibernation. What could be the problem?
It is by design.
When XP comes out of hibernation, XP expects it to be a reason he came out of hibernation. If XP comes out of hibernation and can't find anything ' to do' it resumes hibernation by himself in 300 seconds (5 minutes).
This feature is built in case your system is equipped with the hibernation of some external event like a networking event, etc. and you don't want that, she will automatically return to hibernation.
If you move the mouse, press any on the keyboard, etc., which is considered to be something, so XP knows you're here, and it will not automatically resume the hibernation.
What do you see or you try to do something and hibernation occurs while you are busy?
You can read a little about the functionality of XP here:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;318355
If you don't like the way it works, I know only a workaround solution that is to your system from a shortcut on the desktop or in hibernation, and then using a third party application batch file so that when XP comes out of hibernation, the mouse movement is simulated is enough to satisfy XP thinking that any human being moved the mouse and it will not rehibernate.
I can tell you a way to do it if you are interested... after the understanding that there is really nothing wrong.
Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
-
failure to come out of hibernation
When I have finished using my computer and put he put in Hibernate mode, it shuts down correctly, but when I turn it back on I get a message that reads unable to come out of hibernation and the computer restarts, can anyone help me solve this problem, it would be very appreciated thanks :)
Read the info on sleep disorders in the tutorial above.
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Also read this tutorial; as well as the 'related links' at the bottom of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 x 64 can't come out of hibernation
I went to automatically activated my Windows 7 system after it went into hibernation and I received the following message is displayed:
Your computer cannot come out of hibernation.
Status: 0xc0000411
Info: A fatal error occurred processing to restore data.
File: \hiberfile.sys
Any information that was not justified until the computer entered hibernation will be lost.
What is - this and why I am recceiving it.
At does not have any meaning? I posted what the 0xc0000411 code means.
Do you see additional information at the failure of the hibernation?
You can try to start the prompt with admin rights [1] and run
Chkdsk /f /r
to check your HARD disk for errors.
Best regards
Amdre"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
* - Original title - Win7 settings
This is related to other issues on Win7 Aero performance. I have a Core i5 processor 2310 2.9 GHz CPU and a videocard from ATI (AMD) Radeon HD 6570 (I don't know the exact specifications but minimum memory for this model is 512 MB). Well, this should be enough to use Aero. However, when my PC comes out of hibernation, I get a message that the settings have been automatically changed because of not enough memory for operation Aero. Why is it so?
Hello
1. have you made changes on the computer recently?
2. is specific to hibernation question?
3. What is the accurate and complete error message?
Method 1.
Open the Aero Troubleshooter: http://windows.microsoft.com/en-IN/windows7/open-the-aero-troubleshooter
Guided Help: Troubleshooting Aero in Windows 7: http://support.microsoft.com/kb/976170
Method 2.
You can try to change the power settings and check if that helps.
Power management: http://windows.microsoft.com/en-us/windows7/products/features/power-management
Method 3.
You can also update the display drivers and check.
Update a hardware driver that is not working properly: http://windows.microsoft.com/en-hk/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Refer.
Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions
I hope this helps.
-
my computer was left on and don't come out of hibernation
Hello Microsoft community
I left it on and it won't turn I tried ant alt delete control that he did not
Not more than f8
Need help ASAP
By pressing the power button for 10 seconds will reboot your machine.
-
Your computer is unable to get out of hibernation 0xc000007b
On my windows 7 Professional, 64-bit when I wake up my laptop I have this message: your computer can't get out of hibernation. Status: 0xc000007b Info: a fatal error has occurred processing the restore data. File: \hiberfil.sys any information that was not justified until the computer entered hibernation will be lost. Does anyone have a solution for this error? Thanks in advance!
0xc000007b error code appears whenever an application or service could not start. In this case, the problem is with the hibernation.
Therefore, as a first step, please answer the questions:
1. don't you turn off the power/remove battery voltage while hibernation (hibernation shows no sign of progress, so those used to pull off the camera, since it is associated with power, defective battery also causes this problem)?
2 - is happens the issue even at the resumption of his sleep?
Case 1:
If the answer is Yes to question 1, kindly make sure enough current is present until the computer is shut down completely. If there is no indicator LED/all other present, please wait for 3 to 5 minutes before turning off the power.
Case 2:
If the answer to question 2 is Yes, you can try to upgrade display drivers (graphics card drivers). If the upgrade fails to resolve the problem, reinstall the drivers: uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check.
Case 3:
If the answer to the two questions above is no, please follow the steps:
Go to start-> type cmd-> right-click on->, click Run as administrator. If guests UAC, click Yes. Then, at the command prompt, type the following line and press enter (disabling hibernation):
powercfg-h off
Then, restart the PC a couple of times. Then, the same way open the command prompt, type the following command and press enter (enabling hibernation):
powercfg-h on
Then try to hibernation.
If the problem persists, once again, disable hibernation, perform a disk defrag, restart the computer and hibernation to activate it. Follow the link for more information about disk defragmentation:
http://Windows.Microsoft.com/en-us/Windows/improve-performance-defragmenting-hard-disk#1TC=Windows-7
-
The problem seems to come from a Windows attempt update may 9. Almost all the subsequent updates have not except when I got on that date. That no longer works. I can't find any of the myriad of error codes. Need help!
Hello
I suggest you to follow the steps below and check if it helps.
Method 1: Try to reset components to update Windows from the following link: http://support.microsoft.com/kb/971058
Method 2:
If the problem persists, then I suggest allows you to set your computer in a clean boot state then try to install updates again and also check if the system comes out of hibernation.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
White screen coming out of hibernation
Have Windows 7 Home Premium on a Dell E1505 laptop. Coming from hibernation, the screen is a black screen with a flashing cursor in the upper left of the screen. By pressing the power button / power off then back on starts the laptop bios checks take a few minutes to complete (normally takes seconds) but will then come out of hibernation correctly. Have updated all the drivers that were available. There is no problem coming out of hibernation just to sleep mode.
You can also try the response to a similar thread by Zack who said that sometimes the Boot Configuration data (BCD) file may have questions that raise such errors. Follow the steps below to fix the BCD file.
4. run the following command: bcdedit /deletevalue {3d8d3081-33ac-11dc-9a41-806e6f6e6963} inherit
5. test of hibernation.
Thank you for that response, Varun - doing definitely solved the problem for my new laptop Windows 7.
The victory seems to have been short-lived, however. The first restoration of hibernation went very quickly, but since then, it's to her long wait at the black screen, blinking cursor.
Whenever I restart the computer by using the bcdedit steps is obviously not an option.
How can I prevent the computer from doing whatever it is that it is the practice that requires the following steps for normal operation?
Thank you!
You can try
(1) open a Notepad document
Type 2) in what you would do in the shell IE: C:\windows\system32 > bcdedit /deletevalue {3d8d3081-33ac-11dc-9a41-806e6f6e6963} inherit
(of course you have to do footwork to track down the of first to varun j postafter do you cut and paste replaceing identifier the identifier you see here with one adapted to your computer)
3) Save as
(4), select all the files
(5) name of file "hibernate_fix.bat" less the quotes of course
6) Save to desktop
(7) running every time you can leave your computer for an extended period
What this does that create a command shell executable that u just double click and itll do on its own as a macro
great thing about this is that you don't need administrator rights you can also pin to the start menu
-
I bought Lightroom 5 of B & H Photo a few months ago and since then have now upgraded computers. This new computer doesn't have a hard drive and I can't figure out how to download it on my new computer. I must not have created an Adobe account when I initially purchased and downloaded on my other computer. How can I still download it if the serial number does not appear in my plans and products page? I still have the drive and everything that came with it.
Hello
Please download the Lightroom 5 application from the link below.
http://prodesigntools.com/Lightroom-5-DDL-comparison-vs-LR4.html
Serial number - please visit https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html
Let us know if this helps!
Kind regards
Vivet
-
Satellite L10-119 out of hibernation when moved...
Hello
I have a strange problem with my Satellite. He goes in and out of hibernation with no problems but when her hibernation and I want to move the laptop to put for example in my bag it comes suddenly from hibernation. She does this on a sign of mild shock, touch and movement. The problem is even more strange that it disappears when I plug the power - Hibernate the laptop's rock then stable and it is only started when I open the lid or press the power button.
A that someone has experienced this problem? Hibernation is very useful and I can't enable on-the-go, as my computer starts to turn :(Thanks in advance for any help.
I've never heard of this. I use the mode standby and hibernation on both of my books and if the screen cover is closed properly I can do whatever I want and turn around. The laptop is OFF. After opening the cover of the display unit turns on automatically.
There is the same situation with sleep mode?
-
Satellite P15 - if the plug comes out, the battery stops charging
My Toshiba is rather annoying. I hope there is a solution to this and it is not integrated in the computer by braindead materials developers.
My battery is toast. For a long time. I find the computer works very well if the power cable is in. If she comes out, the battery has usually about a minute and a half of her life. However, what makes me shit off the coast, it is that the battery does not load again. He will sit and drain his power to zero, even with cable connected sector, if the plug is disconnected even for a millisecond. The only way to load it again, is to shut off the computer and start upward.
What the hell?
Hi floydien,
Wow, Satellite P15 is really an oldie.
I m not an expert, but to me this looks like a battery or motherboard problem. A battery can be recharged about 500 times and after that it will lose a lot of power. This means that you can work a few minutes only on battery mode.
In your case, I'll try a new battery. If it doesn t work I think you need a new mainboard.
Also take a look on eBay. There you can get second hand cheap parts sometimes. -
Windows 7 laptop restarting after being out of hibernation after Windows Update
A Windows 7 laptop is force a restart after coming out of hibernation when Windows Update is scheduled to run during the time, he was in hibernation. The user doesn't have a choice, even if theNoAutoRebootWithLoggedOnUsers option on windows update registry key is set to 1.
Is - this intentional? Are what solutions there?
Thank you
A
Hello
This problem occurred for many users.
See this link for a possible solution-
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/7353bcf5-4d1b-4657-aac5-84da5f8988d9 -
When booting computer error says "frequency out of range" in Vista
I tried to play the fortress team 2 out of steam when he says "frequency out of range" when he started. I restarted my computer, he got to the start screen, but with the screen that he always says "Frequency out of range" there is sound but no screen. I tried to change the resolution in safe mode, but it still doesn't work. need help please
* original title - when I turn on my computer, it says "frequency out of range."
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do the restore of the system in Safe Mode, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Basically I have spreadsheets that come in I want to organize. I need to do a search in a column, when it finds what I want, another column for another search string and then return data from a column of the third. Sounds confusing, I know. Here's wh
-
Satellite L50 - B - 2FC - no device capable of starting please don't restart
No boot device able to please don't restart. How to do
-
Satellite L505 - decimal button and '8' pad does not
Hello My buttons decimal and 8 on the numeric keypad of my laptop does not work. It seems to work after a few minutes of bashing alt + ctrl + shift + fn + keyboard arrows keys, then as soon as I move away from my computer it stops working again. does
-
Why my music skip? his songs also announcing
some of my music is "announced" and then it lists all the playlists on my ipod nano. my music jumps as well.
-
Frozen in the background on my phone iPhone app
Since I got the update ios 9.1 my phone has my app messages frozen in the background, even when the phone is off! It is getting boring because it is blocking on the margins of the apps that I have and getting. Someone else has this problem and knows